Shop our Airplanes Products Drone Products Sales

Ultimate RMRC Soldering Jig

This little gem of a jig combines clamps for bullet connectors and various battery connectors, with a rotating arm to hold wires securely while you make some smoke.

Splash

The most "ultimate" soldering jig yet!

There's a number of soldering jigs on the market, ranging from simple billet blocks, to groupings of banana clips at the end of flexible arms; each one does something well, but few do it all. Enter the RMRC Ultimate soldering jig. This little gem of a jig combines clamps for bullet connectors and various battery connectors, with a rotating arm to hold wires securely while you make some smoke.

Taken from RMRC's website: Introducing the best soldering jig available for R/C hobbyists! Aluminum jigs absorb heat and make bullet connectors difficult to solder without cold joints. This material does not absorb the heat and makes soldering a breeze!

Specs:

  • Fully adjustable arm
  • Multiple sizes for bullet connectors with clamp
  • Spaces and clamp for soldering T-plug, EC3, etc
  • Includes bag and stick-on stopper feet

Link to product website

Last edited by Matt Gunn; Aug 18, 2013 at 08:35 PM..
Thread Tools
Old Aug 19, 2013, 09:43 AM
Lost_Dawg is offline
Find More Posts by Lost_Dawg
Registered User
??? "make bullet connectors difficult to solder without cold joints" ???

I don't think that's what they would want to say. LOL
Old Aug 19, 2013, 09:50 AM
Martin Y is online now
Find More Posts by Martin Y
400' ..... NOT
Martin Y's Avatar
I like the "fully adjustable arm". Holds your favorite smoke (cough, cough) while your soldering
Old Aug 19, 2013, 10:16 AM
Matt Gunn is online now
Find More Posts by Matt Gunn
RCGroups Editor
Matt Gunn's Avatar
Quote:
Originally Posted by Lost_Dawg View Post
??? "make bullet connectors difficult to solder without cold joints" ???

I don't think that's what they would want to say. LOL
That's what they said, taken straight from the website. Allow me to quote the entire sentence:

Aluminum jigs absorb heat and make bullet connectors difficult to solder without cold joints. This material does not absorb the heat and makes soldering a breeze!

Their intent is to say that an aluminum jig pulls the heat from the connector as you solder, increasing the chance of a cold solder joint.
Administrator
Old Aug 23, 2013, 06:37 AM
FPVnAround is offline
Find More Posts by FPVnAround
Registered User
Pics, pics, pics....
Old Aug 23, 2013, 06:41 AM
FPVnAround is offline
Find More Posts by FPVnAround
Registered User
Pics finally loaded... yeah, what Ever... no big deal, doesn't really help me...
I need a jig that can hold 4 antenna wires in place while I solder them.. all else is just stuff I already have!!!
Old Aug 23, 2013, 08:47 AM
Matt Gunn is online now
Find More Posts by Matt Gunn
RCGroups Editor
Matt Gunn's Avatar
Here you go, FPVnAround. A lot of people make these:
http://www.ebay.com/itm/New-Design-T...-/290935238711

exactly what you are looking for!
Administrator
Old Aug 24, 2013, 01:59 AM
FPVnAround is offline
Find More Posts by FPVnAround
Registered User
Nice, thx ;-)
Old Aug 30, 2013, 08:26 AM
McSkies is offline
Find More Posts by McSkies
McSkies's Avatar
Sorry for the description error, haha! Totally my fault and I just fixed it.
Site Sponsor
Old Sep 05, 2013, 12:39 PM
Dangerous James is online now
Find More Posts by Dangerous James
Pompano Hills Flyers
Dangerous James's Avatar
Easy enough to copy and 3d print it.

DJ
Old Sep 05, 2013, 12:46 PM
Matt Gunn is online now
Find More Posts by Matt Gunn
RCGroups Editor
Matt Gunn's Avatar
Show us your finished product when you get done
Administrator
Old Sep 05, 2013, 01:15 PM
McSkies is offline
Find More Posts by McSkies
McSkies's Avatar
Quote:
Originally Posted by webdr View Post
Show us your finished product when you get done
And after you have tried soldering with it.
Site Sponsor
Old Jan 14, 2014, 04:58 PM
philthyy is offline
Find More Posts by philthyy
UAV Integrations
How do you use this jig to solder Deans connectors? I see in the pic that you can hold a Deans plug "sideways" but what about holding it in the other orientation in order to solder the other lead?

There doesn't seem to be any method for clamping the Deans plug with the positive tab mounted horizontal...?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Jig's Up Soldering Jig Review Tram The Builders Workshop 371 Apr 30, 2014 09:05 PM
For Sale A-JUSTO-JIG Wing Jig with Fuse Jig philips7 Aircraft - General - Miscellaneous (FS/W) 2 Aug 07, 2013 10:48 PM
Sold HobbyKing "Mr Jigs Up" Soldering Tool constantmotion Aircraft - General - Miscellaneous (FS/W) 0 Feb 25, 2013 11:05 PM
Gallery Soldering jig bz1mcr Your Plane Photos 0 Jun 22, 2005 02:17 PM