Thread Tools
Feb 06, 2004, 11:35 AM
Fiberglass dont bounce???
RandyK1's Avatar

What size cells are in the Hitec 110mah RX pack?


I need to make a few of these packs for my HL glider. I need to know the size the cells are. I am thinking 1/3 AAA. Thanks ...R...
Last edited by RandyK1; Feb 06, 2004 at 11:41 AM.
Sign up now
to remove ads between posts
Feb 06, 2004, 06:08 PM
Registered User
GOLD PEAK makes a 160mah 1/3AAA as well
Feb 06, 2004, 06:55 PM
Registered User
Dr Kiwi's Avatar
I have in front of me an extensive listing of battery sizes from the www.batterystation.com site and the only 110mAh cells they list - Sanyo N110AA and Panasonic P-11AA and P-11AAH are all 1/3AA size (14.0mm x 16.7mm: wt. 6.5g - 7.0g). The only 1/3AAA cells (10.0mm x 15.0mm: wt. 3.3g - 4.0g) they list are Sanyo 50AAA (50mAh) and GP-12AAAM (120mAh) and GP-16AAAM (160mAh).

Cheers, Phil
Feb 06, 2004, 06:57 PM
Fiberglass dont bounce???
RandyK1's Avatar
I have 8 of the GP160 1/3 AAA cells that I can make 2 rx packs from. The plane that I ordered call's for a Hitec 110mah rx pack to ballance, so I need to know if the Hitec pack is 1/3 AAA cells or larger. If the Hitec pack is 1/3 AAA cells than I have no problem, as I can make my own packs. Thanks ...R...
Feb 06, 2004, 07:05 PM
Fiberglass dont bounce???
RandyK1's Avatar
Dr Kiwi, Thats where I got the GP160's from. They always have great deal's. A few weeks ago I got a bunch of the 950KAN cells for $1 each, and a few weeks before that I picked up some RC-3300HV cells (zapped) for only $4.50 a cell. I saw a 110mah pack listed on the NSP site that were 1/3 AAAcells, but it wasnt the Hitec pack. ...R...