Thread Tools
Old Jul 10, 2013, 07:53 PM
Soma is offline
Find More Posts by Soma
:)
Discussion

Blade nQX FC board on mQX, Ladybird & X4 size quads


Hi All,

This thread is dedicated to using the nQX board on other quads.
FC Part no. BLH7601
nQX recommended transmitters

There has been info in the threads below. This thread is to collate hacks/mods/info necessary to adapt this board to other craft.
Blade nQX thread
Blade mQX thread
Frankenquad thread

Lets see what this little FC can do

Daryoon's size comparison blog post


DirtyDovi's Connection Diagram...



mQX Size... FnmQX

It seems the recommendations at this point are the V959 motors are the strongest.

Thanks to Daryoon for the first pics... From This post.
V959 frame and V929 booms.




First flying vid of mQX size I'm aware of is DirtyDovi's converted Syma X1...
Blade Nano QX Syma X1 UFO Hybrid (3 min 34 sec)

And his build...
Hybrid Quad Build (2 min 31 sec)


Woodsturning's vid post...
FnmQX Frankenquad (1 min 47 sec)


Daryoon's FnmQX vids...
Stability mode...
Blade Nano QX on mQX Style Frame (2 min 44 sec)

Agility mode...
Blade Nano QX mQX Agility Mode (3 min 19 sec)


Here's mine as a PNP...
You'll need these as motor wires. Switch polarity of plugs at the FC end.


First vid here... Second Vid below...
FnmQX Test 02 (2 min 45 sec)




Ladybird Size... FnQX

Frankenquad recommendations seem to be...
H36 Frame
U816 Booms - There's also talk of the InfraX booms with 8.5mm motors being more powerful.
YD717 Props
Syma X1 motors (if you want to solder)
(Please correct me if I'm wrong)
Daryoon's been weighing parts... Here... and... Here...

Daryoon's FnQX build here...
Blade Nano QX FrakenQuad (5 min 55 sec)

Massive RC Frankenquad


Jason4207's FqV2 build... Flipping motor connectors to top of board and reverse polarity.


EArHog's vintage FQ build...

And its evolution to FC underneath


Mine as PNP...




Husban X4 / Traxxas QR1... FnQX4

From MIDNCOCO's posts here & here on the nQX thread...




Daryoon & Jason's Pro/Con Summary...

To, to summarize what you'll gain...
1. nQX Stability mode's flight characteristics.
2. Ability to use with DSM2/DSMX compatible radio for a more robust signal.
3. True acro mode with manual flipping, loops, etc.
4. Bail out button.
5. Fast pirouette rate.
With the Agility and Stability mode switch, you get two quad in one.
nQX board is attached w/ DS-tape, so vibrations are not transferred to it as much from the frame.

What's the draw backs?

1. Higher initial cost for nQX FC @ ~$30
2. Unproven flier because not enough people with the FnQX in hand.
3. Complexity associated with having to solder on a new battery lead to use the larger lipo.
QX board is attached w/ DS-tape, so it can get a little loose sometimes.


Reference pics nQX board...




Last edited by Soma; Jul 23, 2013 at 10:00 AM.
Sign up now
to remove ads between posts
Old Jul 10, 2013, 08:12 PM
Wolfmetalfab is offline
Find More Posts by Wolfmetalfab
Registered User
Wolfmetalfab's Avatar
I really want to blame Soma for me being here... But this one is totally Daryoon's fault posting the FQ mod with the nqx FC over on helifreak lol

Have a h36 frame and arms, few sets (14) of YD717 props shipping from BG can't wait to start messing with this setup
Last edited by Wolfmetalfab; Jul 10, 2013 at 08:16 PM. Reason: Post before finished...
Old Jul 10, 2013, 08:15 PM
nate25j is online now
Find More Posts by nate25j
Quad On!!
nate25j's Avatar
Nice little build. It looks like it's crazy maneuverable. I may have to build something like this.
Old Jul 10, 2013, 08:28 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
Chassis: Syma X1
Chip: Blade Nano QX

*Thumbs Up*

=)

Sam -
Old Jul 10, 2013, 08:31 PM
Soma is offline
Find More Posts by Soma
:)
DirtDovi,

I think you have the first vid up of one of these flying.

I'll link that this arv, gotta go out today


Wolf, can you post the helifreak link and I'll put it in the OP

Cheers all!
Old Jul 10, 2013, 08:32 PM
nate25j is online now
Find More Posts by nate25j
Quad On!!
nate25j's Avatar
Quote:
Originally Posted by DirtyDovi View Post
Chassis: Syma X1
Chip: Blade Nano QX

*Thumbs Up*

=)

Sam -
Very cool! How does handle with that combo.
Old Jul 10, 2013, 08:48 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
Soma,

I have a small attention span..
I forgot about that vid.

Here you go guys!

Blade Nano QX Syma X1 UFO Hybrid (3 min 34 sec)
Old Jul 10, 2013, 08:52 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
Nate,

The NQX chip in the X1 is AMAZING!

I absolutely loved the X1, but wished it could get crazier.. [and more stable]
Since I don't have a high-end TX yet, I thought that I'd swap the NQX chip
so that I could just use the BLADE TX [Which provides better / higher rates]

The vid above will show how it flies.
Unfortunately, only in stability-mode, because in agility mode,
I'm sure it would go up, then straight back down to the ground in a fiery crash..
I'm a newb-pilot.
Last edited by DirtyDovi; Sep 12, 2013 at 01:28 AM.
Old Jul 10, 2013, 08:54 PM
Tboost is offline
Find More Posts by Tboost
Registered User
Hi guys, I love this "modification" threads, I hate stock aircrafts haha.

What is the price of the nQX board?...and what protocol uses?
Old Jul 10, 2013, 08:55 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
Since this thread started,
I've also just ordered a 1SQ [ATF - Almost Ready to Fly]
I'll be swapping the X1 chip into that. It'll be my 'mini-flipper'.

Starting right now - I'll be editing together a vid for you guys
showing the progress pics of the NXQ/X1 Hybrid build,
the vid above [will be added to it] and, it'll show a clip of my POV setup..

*Thumbs Up*



Sam -

**EDIT / UPDATE** Here's a vid of the 1SQ - X1 Hybrid / Combo. Enjoy.

Helimax 1SQ Syma X1 [Hybrid] (5 min 35 sec)


And here's a few pics of the quad: with and without the canopy:
Last edited by DirtyDovi; Jul 14, 2013 at 06:16 AM.
Old Jul 10, 2013, 08:56 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
If I'm not mistaken,
This might be the NQX chip that we'll be looking for..
I stumbled across it on eBay earlier today..

http://www.ebay.com/itm/190859296719...84.m1423.l2648
Old Jul 10, 2013, 08:57 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Registered User
DirtyDovi's Avatar
They bind with Spektrum,
so I'm assuming 2.4G DSM2 or DSMX
Old Jul 10, 2013, 08:58 PM
Soma is offline
Find More Posts by Soma
:)
Quote:
Originally Posted by nate25j View Post
Very cool! How does handle with that combo.
Hi Nate,

The frame handles very well for acro. The drive to use this FC is because the mQX FC has some weird wobbles at full throttle, needing throttle endpoint to be set to 85%. I'm hoping this FC cleans it all up.

This is a V929 frame with the mQX board and 85% throttle. I want the nQX combo to beat this

mQX Buzz 01 (3 min 46 sec)
Old Jul 10, 2013, 09:01 PM
nate25j is online now
Find More Posts by nate25j
Quad On!!
nate25j's Avatar
Quote:
Originally Posted by DirtyDovi View Post
Nate,

The NQX chip in the X1 is AMAZING!

I absolutely loved the X1, but wished it could get crazier..
Since I don't have a high-end TX yet, I thought that I'd swap the NX1 chip
so that I could just use the BLADE TX [Which provides better / higher rates]

The vid above will show how it flies.
Unfortunately, only in stability-mode, because in agility mode,
I'm sure it would go up, then straight back down to the ground in a fiery crash..
I'm a newb-pilot.
Haha man that's the only way to learn is crashes to the ground,well for me that's how many landings were.
The video does justice, but I agree in agility mode I bet it is crazy!
Old Jul 10, 2013, 09:02 PM
Soma is offline
Find More Posts by Soma
:)
Quote:
Originally Posted by DirtyDovi View Post
If I'm not mistaken,
This might be the NQX chip that we'll be looking for..
I stumbled across it on eBay earlier today..

http://www.ebay.com/itm/190859296719...84.m1423.l2648
Yes that's it. Part number BLH7601. I'll put it OP.

mQX binds as DSMX 22ms, so nQX should at least be this. Hope its gone to 11ms but who would notice really?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Whats a good FC board for quad copter? bigheaded5 Multirotor Electronics 1 Mar 27, 2013 07:06 PM
Discussion Blade MQX or Walkera QR Ladybird. RaymondM Multirotor Talk 2 Jun 27, 2012 11:10 AM
Discussion Walkera Ladybird vs Blade MQx Thetis Multirotor Talk 13 Jun 19, 2012 10:37 PM
Video Blade mQX on-board video Mike_Then Electric Plane Talk 4 Mar 27, 2012 05:16 PM
Sold Complete quad copter needs fc board $90.00 shipped thefokker Aircraft - Electric - Multirotor (FS/W) 2 Oct 06, 2011 10:36 AM