Hitec is proud to announce the arrival of its high-performance, microprocessor controlled X1-200 Touch charger. With a 3.2-inch LCD touch screen, integrated cell balancer and automatic current adjustment, this 200-watt charge/discharge station has the ability to operate on a 12 volt automotive battery or 11 ~ 18 volt DC power supply. The X1-200 Touch package includes a universal balancing board with paired cable, two alligator clips and a 2-pin t-type charging cable. Easy-to-use and easy-to-setup, it is your convenient, proficient charging solution.
|Number of Output Channels:||1|
|AC Input Voltage:||N/A|
|DC Input Voltage:||11~18 VDC|
|DC Input Amperage:||15 Amps|
|Charge Circuit Power Per Channel:||200 Watts|
|Discharge Circuit Power Per Channel:||5 Watts|
|Charge Circuit Range Per Channel:||0.1~12.0 Amps|
|Discharge Circuit Range Per Channel:||0.1~2.0 Amps|
|Balancing Current Drain Per Cell:||200mAh|
|Dimensions (WxDxH):||5.5x6.5x2.3 in. (140x165x58mm)|
|Weight:||1.2 lbs. (544.3g)|
|Estimated Street Price:||$119.99|
.Last edited by Paul Onorato; Jul 09, 2013 at 02:34 PM..
Just picked one up yesterday. Unusually, I made this pretty big purchase without doing any research. I was eyeballing the chargers (Want to upgrade from my 80 watt ThunderPower I've had for years. Moving up to a plane with 6s 5000mAh.) under my favorite LHS counter when the owner happened by. He showed me a few, and I went for this one. So far I only used it to put a storage charge on 2 batteries I used earlier in the day so not much to report yet.
Also, I'm just an average user, so don't expect any highly technical data out of me! I'll just come back with my experiences with it once I use it some more, and if anyone has any questions I could try to answer. It appears this is a fairly recently released charger, so I'm a bit of a guinea pig? So far, I find it quite different than the 4 button diamond I'm used to on the old TP, but I like the more visual displays. The big test for me is how will it perform on those new 6s bricks I just got. A 1c charge on them should be no problem for it.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Cool||iMaxRC X200 Touch Screen Battery Balance Charger||eranrc||Batteries and Chargers||7||Feb 15, 2014 08:12 PM|
|New Product||Hitec X1 Touch Multi-charger - in stock!||ServoCity||ServoCity.com||0||Jun 21, 2013 04:51 PM|
|Sold||Hitec X1+ AC/DC Charger and CG-340||Warjet1950||Aircraft - Electric - Batteries & Chargers (FS/W)||0||May 22, 2013 08:29 PM|
|Sold||Hitec X1 Charger 45.00 Shipped CONUS||campbellj||Aircraft - Electric - Batteries & Chargers (FS/W)||1||Mar 30, 2013 01:00 PM|
|New Product||Hitec X1 MF Multi-Function Charger (44176) - $79.99||ServoCity||ServoCity.com||0||Mar 15, 2013 10:23 AM|