Thread Tools
Old Dec 03, 2001, 12:42 AM
Andreas is offline
Find More Posts by Andreas
Registered User

E3d ready to GO


Hi there,

take a look--
E3D ready to go.
2 pds and 2 oz without power pack, but
everything else on-board.
2 oz under the target empty weight.
Should to great on 10 x CP 1700s.

Andre

P.S.-- This was built by a pro builder,
no myself... ( that's a good thing, trust
me, kits elude me).
Sign up now
to remove ads between posts
Old Dec 03, 2001, 01:26 AM
pgleesonuk is offline
Find More Posts by pgleesonuk
Registered User
Looks great! Hopefully my E3D kit is on it's way from the US soon :-)

What covering was used?

What type of receiver and speed controller did you use?

Paul
Old Dec 03, 2001, 04:17 AM
ScotY is offline
Find More Posts by ScotY
Registered User
ScotY's Avatar
The plane looks great, Andre! Out of curiosity, can you tell me who built it and what did it cost to do? I'm looking into this myself...no time. If you prefer to respond privately, my address is scot@hawaii.rr.com
Old Dec 03, 2001, 08:46 AM
GregG is offline
Find More Posts by GregG
Speed Demon
GregG's Avatar
She looks great, Andre . I'd be itching to get her out for a flight.!
Old Dec 03, 2001, 09:12 AM
Dereck is offline
Find More Posts by Dereck
Visitor from Reality
Hi Andre
Now I'm nearly jealous. Mine "just" needs the wing building, covering and assembling. Still, it's being built by the best builder I can afford and trust

What are you using for power? Mine's getting the Endo rig, for a review article out in Reality, but the lure of CP1700s is strong.
Old Dec 03, 2001, 10:11 AM
LJH is offline
LJH
Find More Posts by LJH
LJH
Moths do not fly inverted
LJH's Avatar
Andreas,
Looks great. I flew mine for the first time this past week and the plane is a absolute blast. Best of luck to you.

Cheers,
Jim
Old Dec 03, 2001, 12:33 PM
Andreas is offline
Find More Posts by Andreas
Registered User
Quote:
Originally posted by LJH
Andreas,
Looks great. I flew mine for the first time this past week and the plane is a absolute blast. Best of luck to you.

Cheers,
Jim
Hi there,

I used the standard Endo with 4.7 :1 GP gear as Gary sells it.
14 x 10 prop on 10 cells.

The covering is the Nelson film being recently advertised
-- more like parkflyer stuff, but hey, the E3d is a parkflyer , right
and if you don't tell the plane, it won't know!!!

Weather has been terrible, the E3d was ready three weeks ago.

Derek, get the Cp 1700S--- they are awesome.

I think I will try a 12 pack on the Endo. ( Flame suit ON).

Looks like a healthy motor, maybe go down to a 12x 6.

I used the MEC MX -80 Speed controller,
I have used this controller in BEC mode with six servos and 24 cells--
!!!TRY THIS AT YOUR OWN RISK!!!
The MX 80 is the toughest and most reliable controller I know,
and I burned up a few.:_)

Hitec MG-81 servos.



-- watching the weather report!


Andre
Old Dec 03, 2001, 01:14 PM
kenny_dilger is offline
Find More Posts by kenny_dilger
Registered User
Andre,

I bought 50 2400 cells and have built 3 packs so far (will probably build two more 10 cell packs but we will see). Is the runtime significantly lower with the 1700 packs or is it worth it with the lower weight? How much less is the weight of the packs? Since I am flying at 7000 feet I am going to need to experiment with props/gears but if I could also lose a few ounces that would help.

I am going to try the stock setup first but I doubt it will hover without changing gearing and or props.

Thanks,
Kenny
Old Dec 03, 2001, 01:25 PM
GWRIGHT is offline
Find More Posts by GWRIGHT
Product Manager at Hobbico
GWRIGHT's Avatar
whoa!,.. a 14X10 is WAY too much for the 4.6 ratio and 10 cells. I doubt the comm will last more than 30 seconds. 12X8 APC "E" or 13X7.5 sonictronics folder on 10 cells at the 4.6 ratio. I occasionally (too often actually) use a 14X7 just to be more impressive in vertical from hover,.. but that gives me overtemp shuttoffs on the controller after a few minutes unless I let it cool in standard flight.
Site Sponsor
Latest blog entry: blog
Old Dec 03, 2001, 02:50 PM
Andreas is offline
Find More Posts by Andreas
Registered User
Quote:
Originally posted by GWRIGHT
whoa!,.. a 14X10 is WAY too much for the 4.6 ratio and 10 cells. I doubt the comm will last more than 30 seconds. 12X8 APC "E" or 13X7.5 sonictronics folder on 10 cells at the 4.6 ratio. I occasionally (too often actually) use a 14X7 just to be more impressive in vertical from hover,.. but that gives me overtemp shuttoffs on the controller after a few minutes unless I let it cool in standard flight.
Gary,
you'd be surprised - once you get over the fear factor-
how much abuse a motor can take ( 16 cells on a 015 Astro,
20 cells on jeti 45/3 , 10 cells on a speed 300 etc).

I think I will try 12 cells with a 13x 5.
The Motor is 18.50$... tower has a 2 for 37$ deal.

The handling with CP1700 cells is just so much better on the
Diablotin Super E -- the "lost" weight and fun in handling outweighs the
minimal loss of run time. ( 20 x CP 1700, Jeti 45/3 DD 12x8)I expect the same effect on the E3D.

Andre
Old Dec 03, 2001, 03:12 PM
GWRIGHT is offline
Find More Posts by GWRIGHT
Product Manager at Hobbico
GWRIGHT's Avatar
I understand what you're saying,.. and I've ran the endo's at just over 500 watts (53 amps on 10 cells) on the front of a glider, without a problem,.. but that's for very very short bursts of power. As far as more cells are concerned,.. the armature isn't tied or wedged,.. and I can tell you they don't run well after 12 cells are put on them and the arm looses a winding . Of course being as stubborn as I am,.. I had to do that a few times to make sure it was too many cells. Since it sounds like you're as adventurous as I am,.. let me know how you get along with it.
Site Sponsor
Latest blog entry: blog
Old Dec 03, 2001, 05:42 PM
temacc is offline
Find More Posts by temacc
H2OFLY
Andreas,

I, too, need to get someone else to build if I ever get a kit done...I have been 4 months just working on an already-built wing, to get a model back into the air

So - would you mind emailing me privately your builder, if you want to share him/her? tmcgill@equitygroup.com

Thanks -

Terry
Old Dec 03, 2001, 08:02 PM
Dereck is offline
Find More Posts by Dereck
Visitor from Reality
Well, in for a penny. Just ordered 20 CP1700s from Hills - at $3.00 a pop and not having to diddle around giving my inside seam to EBay, just too good to be true. If I was flying much, would probably have gotten another 20 to lighten up the CAP too.

"All" that remains of my E3D now is to build the wing - still. My builder is real slow right now, and is looking after a convalescent wife. Still, his price is right

If I don't get along with Mayhems, its either a MaxCim 13D or some kind of Astro FAI - 05 or 15 - with a Superbox.
Old Dec 03, 2001, 08:08 PM
Steve H. is offline
Find More Posts by Steve H.
Registered User
Quote:
Originally posted by Dereck
Well, in for a penny. Just ordered 20 CP1700s from Hills - at $3.00 a pop and not having to diddle around giving my inside seam to EBay, just too good to be true.
Whats that suppose to mean? You will always find deals on Ebay that just can't be had anywhere else.
The only reason Hills is selling them for $3 each, is that TNR is selling them for that much on Ebay. They are a paid advertiser here also so I dont know what you mean by too good to be true.
I got some many times off Ebay from Wayne, only $6 shipping also, plus they take pay-pal. Ebay does not make any profit at all off of the buyer, if thats what your referring to.
Old Dec 03, 2001, 09:17 PM
Andreas is offline
Find More Posts by Andreas
Registered User
Quote:
Originally posted by Dereck


If I don't get along with Mayhems, its either a MaxCim 13D or some kind of Astro FAI - 05 or 15 - with a Superbox.
Derek,

no Mayhem ( we have had enough of that) -- Genetic Material -- Endoplasma
is the word.

I will try the stock set-up first, if that won't work as I want--
the F16 will pull it straight up no matter what.
Very curious what Gary put together here, something tells
me that on 10 x CP1700 this ship should do just fine - stock!

###
Good deal on the cells!
Have a Rambler 45 ( big, light, sport arf by World Models , 63 inches, amost 700 sq) is run on a Maxcim D geared on 20 cells-- ALL SMILES, guaranteed!
I myself share your opinion about Ebay.

You get good deals, but be prepared to sell your data to big brother.


Andre


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Ready to go back to Gas John Webb Power Systems 32 Nov 17, 2007 06:38 AM
New Tiny almost ready to go. DerekB Parkflyers 24 Apr 14, 2002 07:57 PM
Yippee! Tiny almost ready to go hager Scratchbuilt Indoor and Micro Models 8 Jan 08, 2002 03:13 AM
Dual EDF Mini-pleaser is ready to go psbowen Parkflyers 6 Dec 23, 2001 11:59 PM
Sky Scooter Re-Proped & ready to go, Where to get Battery? mrebman Foamies (Kits) 2 Aug 01, 2001 04:30 PM