Thread Tools
Jul 23, 2013, 12:07 AM
Registered User
Quote:
Originally Posted by mrqua View Post
Here, let me post another picture, sorry if it is low quality.
[URL=http://s452.photobucket.com/user/rickyaditya/media
I can't screw the carbon plate to the plastic motor mount because of the 3 motor wires.
Motor screwed to the three outer hole on the carbon plate, so it can't be reversed.
Here is how i did cabling on arms.
Sign up now
to remove ads between posts
Jul 24, 2013, 02:47 PM
Registered User
Quote:
Originally Posted by Lorisdem View Post
What?!
Tarot Iron man 680 with new motor mount?
....or, the picture is wrong (confusing) only on the box?
Jul 24, 2013, 02:49 PM
Registered User
Quote:
Originally Posted by mukkendro View Post
What?!
Tarot Iron man 680 with new motor mount?
....or, the picture is wrong (confusing) only on the box?
There should be a little sticker in the top right corner with the new model.

They all come in the same box
Jul 24, 2013, 03:34 PM
Albuquerque USA
Quote:
Originally Posted by mukkendro View Post
What?!
Tarot Iron man 680 with new motor mount?
....or, the picture is wrong (confusing) only on the box?
there is no different on the Fy680 and the 690s

the only different is the 690 come with the new mount where you mount the motor to the far end of the boom on the mount instead the 680 on the boom and that give you like 1/2ich more on each size so now you can fly 14" props that all it is.

I saw a post where some one bought a 690 and the complain that the box is open. Well what they did is since it the same frame they just open the box swap out the old mount to the new mount and you have 690 so dont alarm if this is your case

ps if the plate came with your kit is matted then you in luck if your plate is shiny then that is the half n half carbon which some one call it fake carbon. It very hard to get the matted plate as only luck lol
Jul 27, 2013, 09:51 PM
Registered User
Copterstar: I saw that you also carry the Tarot 2814 700 kv motor. Do you think it's a good match for this frame with 13 inches props? (I was thinking 13X6.5)

Is this motor comparable to the sunnysky one?. it is really inexpensive and look great!
Jul 29, 2013, 07:42 AM
Registered User
Hi All, may be a question for coperstar also, i read all the posts but don't see any amelioration to the fragility of the clips to fold the frame, any one can confirm this ? thanks
Aug 06, 2013, 08:12 AM
Registered User
Quote:
Originally Posted by rahulvyas View Post
see the pics of the fy690S
Hey, did you got the old landing gear? Seems that you didn't get th T shaped plastic part to join the vertical part to the horizontal part. Where did you buy it?
Aug 06, 2013, 08:31 AM
Registered User
Installed the ESCs on my ESC plates

Painted two of the booms red for better visibility under LOS flying
Aug 06, 2013, 11:21 AM
Registered User
Quote:
Originally Posted by Alekoy View Post
Installed the ESCs on my ESC plates

Painted two of the booms red for better visibility under LOS flying
Looks nice. Did you upgrade the capacitors?

Got my 690 kit still sitting in the box. Was delivered while I was travelling and going to travel some more before I get a chance to start putting it together.
Aug 06, 2013, 12:02 PM
Registered User
No, I did not upgrade the capacitors.
Aug 06, 2013, 12:39 PM
Registered User
Don't you think it's dangrous to have wires hangin outside of the arm like this? In case of a crash, or even just a hard landing, you might break on of your escs.
Aug 06, 2013, 01:54 PM
Registered User
I do not plan on crashing all the time.
Aug 06, 2013, 03:52 PM
Registered User
Quote:
Originally Posted by Alekoy View Post
I do not plan on crashing all the time.
Good plan.

Can you post pictures of the rest of the frame? Want to see how you have it set up.

Thanks
Aug 06, 2013, 04:44 PM
Registered User
Quote:
Originally Posted by Alekoy View Post
I do not plan on crashing all the time.
Yes I know . Me neither. But a hard landing happens to everyone once in a while.
Aug 07, 2013, 02:51 PM
Gravity Sucks!
smarks's Avatar
Quote:
Originally Posted by Alekoy View Post
Installed the ESCs on my ESC plates

Painted two of the booms red for better visibility under LOS flying
I assume you made those mounting plates yourself? I am just mounting my esc's directly to the bottom of the plastic mount.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question GLB 20mm Carbon Fiber Center Plate +16pcs Tube Fixtures for 700-1000mm Hexacopter/Oct tormodnt Multirotor Drone Talk 5 Mar 09, 2014 12:18 AM
For Sale **New** Carbon Fiber Hexacopter 680 mm (Australia) LegendLength Aircraft - Electric - Multirotor (FS/W) 0 Apr 13, 2013 02:17 AM
Discussion ~800mm Carbon Fiber Hexacopter Frame serrated Multirotor Drone Talk 5 Feb 15, 2013 11:59 PM
For Sale HEXA X800-V6 Carbon Fiber Hexacopter frame Kit Go4it Aircraft - Electric - Multirotor (FS/W) 0 Dec 05, 2012 02:59 AM
Discussion strenght of 6mm square carbon fiber tube for hexacopter abcd123 Multirotor Drone Talk 0 Jan 27, 2012 03:01 PM