Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 04, 2004, 06:41 PM
Registered User
Good point Mal..the motor can be cheap...but the ESC will cost you about $50. And for some (like myself) who don't have the skills to convert one, we need to buy them. For the performance you would get however...I agree that it is a pretty cheap solution
Sign up now
to remove ads between posts
Feb 04, 2004, 08:35 PM
Registered User
kushal_22's Avatar
yeah The ESC is going to be AT LEAST that much. I keep forgeting about that one as ihave 3 of them.
Feb 04, 2004, 10:42 PM
Master of the Wind
AIR MOVER's Avatar
yea ouch on them as they do put a bite on your pocket.. sorry been busy busy building building.. Im getting there should be two more days and by goodness im done woooohooo.. whew and then some but cant wait for you guys to enjoy something that is simple and yet so rewarding.. pure performance and robust enough to handle the job.. if you keep these planes under 4oz you wont see them breaking much.. I have tumbled mine wing tip to wing tip.. cartwheeling .. on my 3oz version the way I mount the wings helps absorb the loads.. when Im done building I will be posting how to pics... as I mail out all these planes I will have a few days to get the pics posted intime for you to review them prior to getting your planes.. then it should be a no brainer to prep them for flight.... Im going to make a plane taylor made for max speed on CD rom motors useing 3030 3040 4040 props.. The name of the plane is called 100 .... meaning 100mph in stock form made small for park flying and under 4oz. It will eat up sky fast up high where its safe to do so and down low you can use the power to pull 3D speed flying ... I have a test plane made but not flown perhaps I will have time this weekend if the weather is reasonable..
Feb 04, 2004, 10:59 PM
Registered User
kushal_22's Avatar
Anyone else Planing on using a RZmotor on the 20inch Span ones? I have a RZ400 i was going to put on mine while i wait for the CDrom one to get here.

Mal
Feb 04, 2004, 11:26 PM
Registered User
i was going to try a himax2015-3600 as a direct drive. But my shipment got lost....i'm waiting for the replacement (and my 20" mono of course)
Feb 05, 2004, 01:40 AM
Registered User
kushal_22's Avatar
HMMM let us know how it goes.

Mal
Feb 05, 2004, 02:45 AM
Master of the Wind
AIR MOVER's Avatar
yes the razor will work.. nice light motor..DD 4040 should haul ..with 850s to 1200s . If your going with a brushless im going to make sure you get one of the stouter wings ...=) anyone else going with max power let me know.
Feb 05, 2004, 07:34 AM
FOAMYHOLIC
spadforme's Avatar
I to will be putting a DD RZ400 on mine so send me a strong wing.
Feb 05, 2004, 11:06 AM
Registered User
kushal_22's Avatar
Quote:
Originally posted by AIR MOVER
yes the razor will work.. nice light motor..DD 4040 should haul ..with 850s to 1200s . If your going with a brushless im going to make sure you get one of the stouter wings ...=) anyone else going with max power let me know.
Thats the "Golden ticket" I am using

WWEEEEEEEEEEEE!!


Mal
Feb 05, 2004, 11:23 AM
INDORUS EXPARAMINTO
SPEED-E-FLYER's Avatar
I will take one of mine with the BIG BEEFY WING
I have a little himax motor that might work .
Larry
Feb 05, 2004, 01:44 PM
Registered User
kushal_22's Avatar
You know the ACN motor would work QUITE well Too.

Mal
Feb 05, 2004, 02:14 PM
Master of the Wind
AIR MOVER's Avatar
Yea any small brushless should work on the 20 mono.. as as far as the 15.5 wing its got to stay under 4oz..to 4.5oz or it will be a bear to land but not in wind.. float on in.. with a headwind.. I will know more info this weekend on what the 15.5 can handle. will be trying 340's and 850 cells on a 16g brushless..
Feb 07, 2004, 02:48 AM
Registered User
kushal_22's Avatar
Let us know when youy start shipping these out.

BTW Am i right inthinking these come Put together? All We do is stick our servos motor RX and Linkedges on it?

Mal
Feb 07, 2004, 09:27 AM
Hi Wattage Electrics - Cool
Rad Racer's Avatar
This is the 16g CD rom motor that AirMover will use to power his airplane. I have built a few CD rom motors in different configuations and have been most impressed with the performance of such small motors.

The spec's for the pylon motor are:
13T .43mm wire
(6) n45 magnets
dual ball bearings
3x2 prop
16g (.55oz) weight

Test results using a Kokam 1200mAH 2s w/3x2 prop
RM = .102 ohms
Io = 1.01A (no-load)
I = 4.78A (full-load)
KV = 4122
RPM = 25,400

Airmover - Did you get your motor today?
Feb 07, 2004, 09:29 AM
Hi Wattage Electrics - Cool
Rad Racer's Avatar
Here's another pic of the pylon motor....also for those interested, a link to some of my other motors.


https://www.rcgroups.com/forums/show...hreadid=186326


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW ImmersionRC Manta FPV Racing WING (Race PLANE) LexusFPV FPV Aircraft 120 Apr 03, 2017 02:02 PM