Thread Tools
This thread is privately moderated by KristyZ, who may elect to delete unwanted replies.
May 09, 2013, 03:27 PM
Trader Rating: 0
Registered User
Thread OP
For Sale

uThere RUBY Full pkg + Dragon OSD+ V2 + Dragon Link V2 Rx + Four 30 Amp Si.K ESC's +


The components in this package are All 100% Never been powered-up spares that in the beginning of our Rc Plane/Rc Multi-Rotor business endeavor we assumed would be needed as crash/fail replacements... Fortunately for us we assumed wrong and had far fewer crashes/failures than originally anticipated...Unfortunately for us, we spent unnecessarily and need to sell-off some unused stuff

>>We absolutely will not split-up the components from this pkg<<

No component from this package has ever been powered-up & Everything will be as it was when delivered new unless noted below.

This package includes the following:

*** uThere "RUBY" Autonomous Flight Controller:
This is the full RUBY FC package with GPS, Airspeed/Pitot/Magnetometer, Barometer, V-Sen/Power Sensor, 2Gb MicroSD Card + RUBY "Expander Module"
Also includes New misc spare component cables of varying lengths with 2 lengths of Dragon Link Rx specific cable
(The included Airspeed/Mag/Pitot is the latest upgrade version from RUBY)

*** Dragon OSD+ V2:
OSD kit includes a fully assembled (Deans) V-Sen + Additional unassembled V-Sen + OEM DL Barometer/Altitude module + OEM Dragon 10Hz GPS + Dragon Labs TTL programming cable
(the included GPS has a longer cable set soldered & still sealed 2-sided 3M adhesive attached, however the GPS has never been powered-up or installed)

*** Dragon Link V2 Receiver with its original (SMA male) antenna

*** "Four" New 30 Amp DYS ESC's factory loaded with Si.K Multi-Rotor FW
Connectors have never been soldered on either end of any of the 4 (the shrink wrap is cut on the back side of one of the ESC's in order to inspect the components but as with everything else it has never been powered and is new)

Cost: $360.00 (Firm) for everything which is 50% of retail (+ $10 for USPS Priority Mail Box shipping if you choose pay by money order/cashiers check)

Unfortunately for any interested buyer: We gave-up our PayPal account about a year ago after tiring of being screwed by their fee's and misc business practices & will never go back.. So this sale is pretty much restricted to buyers from N/E Ohio S/E Mich willing to pick-up in person. If you are absolutely serious about purchasing we may well be able to have someone meet you half-way ect.
Of course you are more than welcome to send a Money Order ect and we will ship immediately upon clearance but that's up to the buyer

Contact: [email protected]
Sign up now
to remove ads between posts
May 09, 2013, 03:35 PM
Trader Rating: 42
Registered User
Wow. This is a great deal and I want it but how do I proceed with minimal risk? Perhaps I can get your address and see if a friend or relative can pick it up and pay you cash in person. Could you please email me?
May 09, 2013, 09:20 PM
Trader Rating: 5
Registered User
When you purchased the RUBY - did you have it setup for any specific plane / quad?

The factory asks you what your going to do with it when you buy it

Thanks

FunDozer
May 11, 2013, 05:05 AM
Trader Rating: 0
Registered User
Thread OP
Actually they don't ask which plane. uThere is just interested in the Rx type so that they know what type of RUBY to Rx cable to ship. The included cables are Dragon Link specific, but it's around $3 for a Spektrum, Futaba ect cable or a simple mod to do it yourself (if it's Spektrum $269 for a Dragon Link system is still cheaper than $3 for a cable in the short run)
The aircraft type specifics are taken care of in the config files on the MicroSD card. uThere (Jim) emails you the base file for your plane. After a couple test flights, you email the log data from the SD back to uThere. They then "tweak" the PID's ect & send it back via email. The entire process can be complete typically within a day to couple days at most. They know exactly what they are looking at and what needs to be adjusted. If your plane is structurally correct, well trimmed and properly balanced they will get it the 1st time..... if it's not, nobody will in any amount of time.
It's a great FC and process for anyone not real comfortable with PID's or without the time/patience for the constant setup work ala APM 2.5. There is no setup software or even a PC cable to deal with. You don't even do the firmware updates. uThere simply emails the update if necessary.
May 11, 2013, 08:41 AM
Trader Rating: 21
Mike Flyer
rellik demanon's Avatar
Hi...How Much For The Dosd Shipped To NY? Providing I Send A Money Order...
May 17, 2013, 01:18 PM
Trader Rating: 5
Registered User
Hello,

Is this still available?


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Found dragon link v2 rx bethelflier8036 FPV Equipment (FS/W) 3 Feb 27, 2013 11:47 AM
Sold Early version V2 Dragon link 9ch RX G-unit FPV Equipment (FS/W) 2 Feb 05, 2013 06:11 PM
Sold Futaba 9CAP with Dragon Link V2 and 12CH RX ROCKY2 FPV Equipment (FS/W) 5 Feb 02, 2013 12:35 PM
Wanted V1 or early version V2 Dragon link RX ROCKY2 FPV Equipment (FS/W) 2 Jan 31, 2013 09:12 PM
Discussion Anyone used Dragon Link and Dragon OSD V2 with Atto? jtprouty UAV - Unmanned Aerial Vehicles 3 Feb 27, 2012 10:22 PM