RangeVideo MicroPNT & MiniPNT - RC Groups
Shop our Airplanes Products Drone Products Sales

RangeVideo MicroPNT & MiniPNT

RangeVideo has introduced a new line of pan and tilt heads designed around the KX1, KX2, and KX6 fpv cameras.


A lightweight and aerodynamic pan/tilt for your fpv platform

RangeVideo has introduced a new line of pan and tilt heads designed around the KX1, KX2, and KX6 fpv cameras. The Micro PNT for the KX1/2 cameras, weighs in at only 33 grams with the camera. The Mini PNT for the KX6 camera weighs in at 77 grams with the camera. They are available in either translucent red and black, and include servos.

Micro PNT Specs:

  • Unique streamlined design
  • Designed for the popular KX2 camera (micro) and KX6 camera (mini)
  • Very low drag coefficient
  • Extremely compact and robust design
  • No external cables
  • 120 degree pan servo included
  • 120 degree tilt servo included
  • Weight: ≈22 grams (including KX2) or 77 grams (including KX6)
  • Mountable options:
  • On top of air frame
  • Hanging under air frame (between landing gear)
  • Pointing forward (Roll & tilt function)

Link to product website

Rangevideo pan and tilt head for KX2 and KX6 FPV cameras (0 min 36 sec)

Last edited by Matt Gunn; Apr 29, 2013 at 11:55 AM..
Thread Tools
Apr 29, 2013, 12:50 PM
Jesus Freak
AtTheCross's Avatar
very kewl
Apr 29, 2013, 01:29 PM
USA: LakeGeorge, New York
Nice and Compact! That smaller (micro) KX2 Cam can be powered 5v-12v (great option).
Apr 29, 2013, 02:20 PM
DFC~ We Do Flyin' Right
Vapor Trails's Avatar
Will RMRC cameras be able to fit in these?
Apr 29, 2013, 03:28 PM
On a holiday?
boopidoo's Avatar
The larger PnT will probably fit some cameras, check rangevideo website for KX-6 (mini PnT) and KX-2 (micro PnT).
Apr 30, 2013, 02:30 PM
Registered User
could it fit the Turnigy Micro fpv cam from Hobbyking?
Apr 30, 2013, 02:36 PM
RCGroups Editor
Matt Gunn's Avatar
They are designed around specific cameras: the KX1, KX2, and KX6. If your camera in question has the same dimensions as those listed, then you're in luck. If not, then you might persuade it to fit with some hacking, but to be honest I can't say. This PNT is brand new and not been out in the public long enough for people to test fit other cameras.
Apr 30, 2013, 10:31 PM
Registered User
May 11, 2013, 05:10 PM
Misfit Multirotor Monkey
Cyberdactyl's Avatar
One of the potential problems that worry me with these new mini gimbals like this one and the upcoming gimbal for the Foxtech V2 and V3, is the large moment put on the servo shaft in any sort of moderate to hard landing.
May 11, 2013, 05:27 PM
Registered User
picard10th's Avatar
If you hit something, incl the ground hard enough to damage a servo shaft that will probably be the least of your concerns
I had a 0420 sitting on those $3 servos for many flights, even had some abrupt stops with no issues
May 11, 2013, 07:47 PM
RCGroups Editor
Matt Gunn's Avatar
Agreed. With this unit, I think that's a non issue...
Jun 14, 2013, 05:39 AM
You can't take the sky from me
Rastislavko's Avatar
I just received my Micro PnT... Design is perfect, nice and compact, only a little heavier than it may be. Camera (KX2) is not that good, worst are those black margins in corners, but still it's usable (any idea for replacement lenses?). But man, what is killing this are those servos. Camera movement is very jumpy, movement with headtracker is unnatural, you can almost count those movement steps - ek-ek-ek-ek...

And don't be fooled by "120 degrees" description on RVOSD website - they are standard 90 degree servos, which range can be extended on receiver to 120 degree.

I'm quite dissapointed, without replacing servos is this PnT useless... Can anyone recommend better ones which will fit?
Jun 14, 2013, 09:11 AM
Misfit Multirotor Monkey
Cyberdactyl's Avatar
I'm assuming they are analog servos?

If so, just get a similar torque rating and physical size digital. Should at least double the resolution and fidelity of movement
Jun 15, 2013, 03:20 PM
You can't take the sky from me
Rastislavko's Avatar
There are absolutely no marking on them, but yes, they don't sound like digital. I'll try to find some..
Jan 24, 2014, 06:35 AM
Registered User
Thumbs up boopidoo.

I love it. Will get one for my new glider in combination with the kx6 and a fatshark trinity tracker.

Real nice design.

I m just curious about the play...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product RVJET RangeVideo Flying Wing boopidoo FPV Aircraft 3734 Sep 12, 2017 01:34 AM
News RangeVideo RVJET Flying Wing awagar FPV Talk 0 Mar 08, 2013 10:50 AM
Sold RangeVideo 1.3 800mw FPV System Camelboy FPV Equipment (FS/W) 4 Feb 07, 2013 09:24 PM
Sold RANGEVIDEO 5.8 400MW FPV almost new! Camelboy FPV Equipment (FS/W) 2 Feb 06, 2013 09:16 PM
For Sale NIB DPCAV 900Mhz Rx and Slightly used Rangevideo 900Mhz Rx ek123 FPV Equipment (FS/W) 0 Jan 20, 2013 07:39 PM