New Camera Mounting System - RC Groups
Thread Tools
Jan 11, 2004, 07:49 AM
Registered User
BAR-STOOL's Avatar

New Camera Mounting System


I was on the BAR-STOOL thinking of a better way to mount a camera that you could point it anywhere. I got to looking around the shop and found the plastic coolent hose. The hose comes in two sizes and I used the smaler size. I had this camera laying around so I made a mount for it to see if it would work. Looks like it will work great.

Roger
BAR-STOOL
Last edited by BAR-STOOL; Jan 11, 2004 at 08:00 AM.
Sign up now
to remove ads between posts
Jan 11, 2004, 07:50 AM
Registered User
BAR-STOOL's Avatar
PIC 2

BAR-STOOL
Last edited by BAR-STOOL; Jan 11, 2004 at 07:59 AM.
Jan 11, 2004, 07:51 AM
Registered User
BAR-STOOL's Avatar
PIC 3 Out the front just under the prop for pictures or streaming video.

BAR-STOOL
Last edited by BAR-STOOL; Jan 11, 2004 at 07:58 AM.
Jan 11, 2004, 07:52 AM
Registered User
BAR-STOOL's Avatar
PIC 4 Out the rear.

BAR-STOOL
Last edited by BAR-STOOL; Jan 11, 2004 at 07:58 AM.
Jan 11, 2004, 08:44 AM
Registered User
Neat use of shop fodder. Is that really strong enough to hold position?

Pic 4 looks like SERIOUS drag.
Jan 11, 2004, 10:40 AM
Registered User
BAR-STOOL's Avatar
WELL I took it up to try this system to see if it will work.
Camera El cheep-o Sipix Blink $19.95 with a cheep CMOS sensor. It did work and it dId not move. I had the camera pointing stright our the front and tilted down 20 degrees.



BAR-STOOL
Last edited by BAR-STOOL; Jan 11, 2004 at 10:46 AM.
Jan 11, 2004, 10:41 AM
Registered User
BAR-STOOL's Avatar
2 PIC
Jan 11, 2004, 10:44 AM
29 rods from you in western WI
Karl Bē's Avatar
Are the adjustable segments simply a friction fit, or is there some sort of internal cinching mechanism?
Jan 11, 2004, 10:48 AM
Registered User
Ironsides's Avatar
Roger:

I have to give you full marks for ingenuity. Well done.

David
Jan 11, 2004, 10:50 AM
Registered User
BAR-STOOL's Avatar
Quote:
Originally posted by Kinnic^2
Are the adjustable segments simply a friction fit, or is there some sort of internal cinching mechanism?
Thay are a friction fit and you can add or subtract as many as you want.

BAR-STOOL
Jan 11, 2004, 11:07 AM
Registered User
BAR-STOOL's Avatar
The small is 5/8 od & the large is 1" od

BAR-STOOL


Thread Tools