Trouble using Multistar ESC Programming Card - RC Groups
Thread Tools
Apr 10, 2013, 11:49 AM
Registered User

Trouble using Multistar ESC Programming Card

Hello, I am having trouble with the programming card for the 45 amp Turnigy Multistar ESC's. I have tried the following:

1. Using a Castle Creations BEC, inline to power the programming card while the ESC has power from the power distribution board via 6s lipo while the ESC is plugged into the programming card. No audible sounds, no apparent changes in motor / esc. ESC does not appear to even be "on" or powered

2. Just using the power from the 6s lipo and plugging in the ESC to the ESC programming card

Here is a brief video:

Untitled (1 min 29 sec)

Attached are photos of settings on the card, as well as the way I am connecting it to the copter, battery and esc. The esc's have power from the distribution board when plugged in.

Turnigy Multistar ESC Manual

Turnigy Multistar ESC Programming Card Instructions:

Can someone help me trouble shoot / fix this or understand how to use the programming card properly.
Sign up now
to remove ads between posts
Apr 11, 2013, 04:19 PM
Registered User
Alright this was really simple. Got it figured out.

Summary / Resolution: Plug battery into ESC, ESC directly into programming card, wait for one beep. Programming complete.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion can I use my turnigy esc programing card with me rctimer esc? imdone Multirotor Drone Talk 4 Jun 08, 2014 06:14 PM
For Sale scorpion commander 45 amp esc with a castle BEC and program card>>>>>> ED3 Aircraft - Electric - Power Systems (FS/W) 1 Feb 26, 2014 03:17 PM
Sold HobbyWing Motor and Esc combo with program card tkoguy Cars - Accessories (FS/W) 2 Apr 01, 2013 04:29 PM
Sold HobbyWing Motor and Esc combo with program card tkoguy Cars - Trucks and Parts (FS/W) 0 Mar 29, 2013 02:26 PM
Discussion what escs can i use this programing card with? epoweredrc Power Systems 1 Feb 07, 2010 12:01 PM