$75
I have original packaging and charger.
Here it is in all it's 7 channel glory.

I can bring to the field if interested.

Wanted: scrap wing or fuse to a foamy. I want to learn to put econokote on foam and practice on scrap first. EPP/EPO/Z Foam or Elapor preferred. Any personal experience or tips, welcome.

I have a big bag of foam for you. there's probably a couple of dead airplanes worth in there.

-Joe

WANTED - I am looking for a LiPo charger (dual is ideal) for a pair of receiver/servo 2 cell FROMECO batteries. I only need 2.5 Amps at 8.4 volts each side but do NOT need a balancer. I have a Triton Jr. so one more of those would be great.

Someone must want to get rid of an old unbalanced charger.

PM sent, I have a triton jr I'm selling.

Frank

Originally Posted by Beemans2

WANTED - I am looking for a LiPo charger (dual is ideal) for a pair of receiver/servo 2 cell FROMECO batteries. I only need 2.5 Amps at 8.4 volts each side but do NOT need a balancer. I have a Triton Jr. so one more of those would be great.

Someone must want to get rid of an old unbalanced charger.

Frank, How much and how do I get it?

rc plane E-Flite Splendor New Airframe Only - $75
condition: new

Brand new, in the box, never assembled or flown, E-Flite Splendor racing plane AIRFRAME. No electronics are included.

If you currently have a Splendor, you NEED an airframe for spare parts. A spare set of wings are $50 at any hobby shop. This is the whole plane! Crash happens, be prepared and at a great price!
jeff

Hi, $10, give me a call at 971-570-0505, we can meet at the field.

Frank

Originally Posted by Beemans2

Frank, How much and how do I get it?

I have a 35CC DLE I can part with.. 4 flights.. $200... and I have a pilot 35cc 330Extra for sale...
$800 less receiver.. flys great..

Hi Guys,
JR 11X DSMX transmitter (It will work with your older DSM receivers) and 9-channel R921X Receiver. Excellent condition (see pictures). All original packaging and manuals.
I am getting rid of it because I want the newer XG14 so I have the extra channel(s) I need for the nose gear steering/trim on the F-16 and enough for the future A-10 project.
Other sellers are asking $450 without the receiver so this is a solid price.

Originally Posted by Wisdumb

I bought this at Tammy's a while ago hanging from the ceiling. It may be a Hobby King thing, seems like I spotted something similar at some point there...
Purchased for $300. Will sell for $200 OBO

Wingspan: 65"
Length: 60"

Has all servos and receiver, speed control and motor.
Fiberglass fuselage
The canopy needs to be attached (yes those are toothpicks holding it in the pics)
The previous owner glued the wings on
The horizontal stab is less than horizontal and should be straightened before flying
Too big for my current vehicle so would need to be picked up (I live in Wilsonville)

How about $150? Anyone.. Anyone... Bueller... Bueller...

Hi,
I have a couple planes to get rid of.

1,Eflite Scimitar airframe servos and motor. needs retracts esc lipo and battery to fly. had the nose broke off. $150

2,Aerobeez 26% Yak 55m HK15298s all around H9 servo arms all around set u for HV. This is electric. I can sell with the eflite power 160 and castle HV120 for $750 $400 for airframe and servos.

3,Hobby king Invictus ef-1 pylon plane. turnigy s306 hv servos castle 75 lite and two nano 4s 2200. the motor is a brodak aerowind 1300kv ef-1 legal motor $325.

My camera broke if you would like to see pictures please send me a pm and I can txt to your email or cell phone.

Joe

New in box. Wonderful training plane. I have removed the DX6i and battery, but motor, esc and servos are all factory installed. $325.

516-236-9277

still available!

Originally Posted by J Mitchel

rc plane E-Flite Splendor New Airframe Only - $75
condition: new

Brand new, in the box, never assembled or flown, E-Flite Splendor racing plane AIRFRAME. No electronics are included.

If you currently have a Splendor, you NEED an airframe for spare parts. A spare set of wings are $50 at any hobby shop. This is the whole plane! Crash happens, be prepared and at a great price!
jeff

I've been flying my rocket gliders at the field, some of my rocket guys asked me to do kits of them since they aren't that savy cutting foam and finding all the parts. I'm doing these one at a time and are just the parts cost plus my time, about an hour and a half.....most of the work is done for you.

If anyone is interested, I don't need to mail them and can leave some of the pieces uncut for boxing which makes assembly even easier. For those that want to do them as a pusher and not rocket glider, I can just not cut out the rear end for the rocket motor and you can mount a pusher on them instead. I've flown both of them as pusher and rocket glider. For a pusher version I'll include a ply plate for tail mounted motor instead of the rocket motor tube. I'm using a grayson microjet V-3 and 800mah 3s pack and apc 6x4 so it's a pretty cheap power setup that has way more than 1:1 thrust/weight. They weigh about 12 oz rtf with electric.

https://www.rcgroups.com/forums/show....php?t=2083332
https://www.rcgroups.com/forums/show....php?t=2275757
https://www.rcgroups.com/forums/show....php?t=2070504
https://www.rcgroups.com/forums/show....php?t=2065112
https://www.rcgroups.com/forums/show...1#post26344459

I realize compared to mass laser cut kits they aren't cheap, but at the low kit numbers it's just not feasable to do laser cutting setup.

Frank