Parkzone servo specs?
Can anyone tell me the specs or differences on the following servos? I have several of these and I am looking to repurpose them for a rudder/elevator/aileron sailplane build. Servodatabase.com does not have any entry and I guess Horizon is tight lipped about the specs. I'm sure they are OEM'd for them and are likely built and sold under another name too.
just google it
lol just kidding. i hate when people post an absolutely useless comment like that.
just search rcgroups
lol the silver medal of useless comments
i too am searching for the elusive specs.
if a member could actually post some specs or a link, that would be nice
The following has been gleaned from the web over a period of time as a file
on ParkZone servo is being compiled.
ParkZone Replacement Servo
"Hitec HS 55 are of similar size and they are 18oz/in...
the E-flite are 17oz/in... so that's close as you can get...
I cannot imagine Parkzone fitting anything astoundingly better than an E-flite or a Hitec of similar size. "
LHS swaps out all small Horizon ParkZone servo e.g. T-28 aileron & Stryker aileron
with an Hitec HS-55. Similar size but the Hitec has a better performance.
The larger rudder servo as in ParkZone Radian is replaced with HS-81, HS-82MG
Specs: Gear Type: Plastic Size Category: Minis and Micros
. SV80 Servo
SV80 Servo: Long Lead as used on T-28/P-51D/Extra 300/F4F & Spitfire Mk IX for Aileron control
Approximately 400mm lead length
Gear Type: Plastic. Length: 24mm Width: 12mm Height: 26mm
. PKZ1090 = DSV130M Digital Metal Gear Servo
Specs: Gear Type: Metal
Height: 0.98 in (25mm) Length: 0.83 in (21mm) Size Category: Minis and Micros Width: 0.47 in (12mm)
NB: Length is 26mm not 21mm as advertised.
. Torque rating for DSV130M is 37.5oz/in @4.8V
. Screw used to fasten the control arm to PKZ1090 is 2mm by 3mm.
. You can get a set of arms/screws in PKZ7012.
ParkZone servo DSV130M are typically used for Rudder & Elevator and SV80 for Ailerons
Radian servo =
PKZ1060 = MINI SERVO (3W)WITH ARMS,SHORT LEAD
PKZ1081 = SV80 LONG LEAD 3-WIRE SERVO: T28
PKZ1090 = DSV130 3 WIRE DIGITAL SERVO METAL GEAR
Users should visit the above servo links and read the reviews posted by users, beside a general Google or similar search online.
Alan's Hobby, Model & RC FAQ Web Links
The servos I recovered are:
2 PKZ 1081 SV80
2 PKZ 1060
I found specs for the DSV130M: 37.5 oz/in or 2.7kg/cm
Anyone, please post the specs of the above two.
Last edited by MoreSpeed; Aug 26, 2013 at 04:59 AM.
Parkzone Radian Pro configuration:
PKZ1081 SV80 Ailerons
DSV130M (metal gear) Flaps
PKZ 1060 Rudder and Elevator
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||parkzone servo specs on servodatabase.com?||socalsteve||Electric Plane Talk||1||Mar 07, 2013 06:14 PM|
|For Sale||Parkzone Habu wing with servos and Dynam Meteor wing w/ servos||tankbuster||Aircraft - Electric - Jets (FS/W)||0||Jan 31, 2013 02:25 PM|
|Sold||2 Parkzone DSV130M Servos||Roly72||Aircraft - General - Radio Equipment (FS/W)||0||Jan 03, 2013 07:58 PM|
|Discussion||parkzone corsair motor specs||Driggs||Power Systems||4||Jun 08, 2009 11:46 AM|
|Discussion||ParkZone T-28 Brushless Outrunner Specs? Please help!||Randy --||Power Systems||3||Aug 30, 2008 05:32 PM|