Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 08, 2013, 07:48 AM
Registered User
Help!

No LED on Eagle Tree Guardian


Has anyone had this problem? Updated to version 1.7 and LED working when connected to the computer but not now it,s installed in the plane. It operates the control surfaces while on the bench but am reluctant to fly it if there is a problem.
Any help appreciated.
Thanks.
Sign up now
to remove ads between posts
Mar 08, 2013, 12:06 PM
billpa's Avatar
Hi, if the LED is not doing anything, this normally indicates that the unit is in "NO STABILIZATION" mode. This will happen if a 3 position switch is controlling the mode of the unit, and the switch is in the middle position. Does this explain it?
Mar 08, 2013, 01:10 PM
Registered User
Thanks for your reply.It is controlled by a 3 position switch with centre position disabled but there is no LED in any switch position.
Mar 09, 2013, 11:17 AM
billpa's Avatar
Hmm. We know the LED is physically working since it blinks correctly when plugged into USB. To confirm, is the behavior you are seeing different when the switch is moved to different positions (i.e., is it stabilizing 2D in one position, 3D in another, etc.)? If not, I am wondering whether the receiver channel is not correctly mapped to the switch, or if the mode switch cable has failed?
Mar 11, 2013, 02:11 PM
Registered User
Disconnected & Reconnected the unit and it is now working as it should (hopefully).
Will fly it in the day or so.
Many thanks,
Paul.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Eagle Tree Guardian vs. Spekrum AR635 AS3X Wild Bill Radios 16 Aug 07, 2014 02:50 PM
Discussion eagle tree guardian bushpilot05 Radios 2 Feb 24, 2013 02:04 PM
Help! eagle tree guardian bushpilot05 Flight Accessories 1 Feb 22, 2013 11:37 AM
Sold Eagle Tree Guardian 2D/3D stabilizer rickfe101 Aircraft - General - Miscellaneous (FS/W) 0 Feb 12, 2013 11:52 AM
Discussion easystar + osd eagle tree + guardian xipho3 FPV Equipment 1 Jan 04, 2013 10:40 AM