Thread Tools
Mar 08, 2013, 11:21 AM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Quote:
Originally Posted by 3Daddict
Do not forget to cut a hole in the bottom of the plane for cooling.
Very true!
Sign up now
to remove ads between posts
Mar 08, 2013, 06:43 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
Ah man, I cleared some room in my hanger...should I get this plane?

I even picked up four 5245 servos.

Must resist.

I stopped in at the LHS today, and asked about OMP, and the owner and some other guys have some of your profile planes, said they are great.
Mar 08, 2013, 08:13 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Quote:
Originally Posted by LoneWolfRC
Ah man, I cleared some room in my hanger...should I get this plane?

I even picked up four 5245 servos.

Must resist.

I stopped in at the LHS today, and asked about OMP, and the owner and some other guys have some of your profile planes, said they are great.
Here I will make it easy for you

http://www.ohiomodelplanes.com/e60sbach/index.htm

he he he
Mar 08, 2013, 08:40 PM
inverted-i-fly
3drcparts's Avatar
website says pre-order, when are they expected in stock?
Mar 08, 2013, 09:21 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Quote:
Originally Posted by Inverted-I-Fly
website says pre-order, when are they expected in stock?
They are in stock. We are currently updating our website.
Mar 08, 2013, 09:29 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Well I am working on it tonight.

First thing I did was the horizontal stab. Usually the way I do this is I prefit it to the fuse and measure the trailing edge making sure each side is equal. After that I cut the covering on both sides and use epoxy to glue in place . As the epoxy is glueing I check the measurement again. Then put the plane vertical and check alignment with the wing. Its better for me to eye ball it than take the measurements I feel. After the epoxy dries I like to take a bead of CA to go down the bottom on each side to secure it.
Mar 08, 2013, 09:46 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Moving on to the wings as I let the stab drive. The servo hole is already cut out for you.

Use the supplied CA hinges to hinge the ailerons and making sure to wipe away any extra CA.
Mar 08, 2013, 11:33 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
I currently dont have the servos in but I went ahead and glued in the control horns for the ailerons. I used a solder tip to cut the hole for the control horn. Make sure you scuff up the horn before glueing it in. I also went ahead and put the control rods on. Just waiting for the servos for the wings.
Mar 09, 2013, 10:38 AM
Registered User
The OMP website is updated and shows all new planes in stock and read to order.
Mar 09, 2013, 02:08 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Picked up a few pieces at home depot today to mount the motor on.
Mar 09, 2013, 04:42 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Batteries came in today!
Mar 09, 2013, 10:19 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
If everything goes right this plane should fly next weekend. Just waiting on servos, rx and a prop to come in. Only problem is I currently dont have a video camera besides my go pro, and ipad. Gotta find one soon! If anyone had a good recommendation let me know.
Mar 09, 2013, 10:30 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
I use a head mounted gopro, but you have to fly close, and it takes a lot of video editing to get it decent, and even then, it's not great.
Mar 09, 2013, 10:45 PM
Team Futaba / Team RMRC
Sukhoikid's Avatar
Quote:
Originally Posted by LoneWolfRC
I use a head mounted gopro, but you have to fly close, and it takes a lot of video editing to get it decent, and even then, it's not great.
I actually forgot I have a older digital camera in the closet. It wont be in HD but it is good enough for now till I can get a decent HD camera.
Mar 09, 2013, 10:47 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
What state are you in? Maybe somebody else can come help out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion NEW OMP 60" Electric S-Bach Sukhoikid 3D Flying 7 Nov 28, 2013 09:18 AM
Discussion am i the only one here with the sbach 342 60"? out of stock Glow to Electric Conversions 20 Apr 19, 2013 07:07 PM
For Sale omp extra da 60 rappid rich Aircraft - Fuel - Airplanes (FS/W) 5 Feb 16, 2012 02:57 PM
Discussion SBACH 342 60 airline XavierM 3D Flying 2 Jan 13, 2012 09:00 AM
Sold Pilot 25% Sbach 342 assembled with servos JimVanLoo Aircraft - Fuel - Airplanes (FS/W) 5 Feb 03, 2011 10:16 PM