Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 04, 2013, 10:20 AM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar
Discussion

v959 FPV


Removed the landing gear, camera, and canopy from my v959, then I strapped on my 5.8ghz FPV cam with a 90mah battery.

At first I got weird results using my 9x radio. But then I turned off the camera, got the v959 bound to the tx, checked that it flew correctly, then I powered up the camera, then everything worked ok. I flew in fpv for about 5 minutes around my living room, never hit anything and landed the v959 dead perfect on the ottoman.

If nothing else, the v959 is going to be my FPV trainer. It's perfect. I'll probably fly both the FPV cam and my 808 #16 eventually.
Sign up now
to remove ads between posts
Old Mar 04, 2013, 10:50 AM
irsyad17 is offline
Find More Posts by irsyad17
Registered User
Cool.Is there any pics or video?
What is the output power of the Vtx?
Old Mar 04, 2013, 10:52 AM
dapple63 is offline
Find More Posts by dapple63
Registered User
dapple63's Avatar
More info please. I want to put fpv gear on my 959. I see some inexpensive gear on fpvhobby.com that is also ultralight.

What are you using?
Old Mar 04, 2013, 11:07 AM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar
http://www.ebay.com/itm/290833604226...84.m1497.l2649

It says 8g, but after I cut off that huge connector and put a losi on it, It weights 4.8 grams.
Old Mar 04, 2013, 03:27 PM
dapple63 is offline
Find More Posts by dapple63
Registered User
dapple63's Avatar
I have looked at that same cam. I thought that there was a chip or resistor in the barrel. Not true? What battery? Range?
Old Mar 04, 2013, 04:32 PM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar
It runs on "4v" but I have no trouble with a 1S. Have not done range testing, but it works around the house. I would imagine it would work for 300 to 500 meters outside with a clear line of sight.

I cut the barrel to pieces expecting a something inside, but it's just plastic. It really does just run on 4v.
Old Mar 04, 2013, 08:38 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
I'm thinking of mounting my 5.8 Ghz setup mine as well. I'll probably just buy another transmitter and transmit video from my 808 and dedicate the original to my micros.

I've had my fill of proving micros can handle tortuous winds. You'll never hear me say this again, but I'm ready for summer and some calm wind leisurely\FPV flying.

The V959s hover really really well...........amazing since they don't have accelerometers.
RCG Plus Member
Old Mar 04, 2013, 10:09 PM
dapple63 is offline
Find More Posts by dapple63
Registered User
dapple63's Avatar
The V959 is great in light winds. But even at 80% throws, it is harder to handle in an 8-10mph wind than my Syma X-1 with a keychain camera and on the high rate.

But still, I think the V959 is my platform for FPV. I ordered the same camera and a receiver. For now I'm going with a 3.5" LCD screen to hook to the receiver. I can do video glasses later.

I'm out about $35 for the 5.8gHz wireless camera/TX and another $30 for the RX. Then the LCD is $19. All shipped free. Yes, it is cheap stuff, but we're talking a V959.

I'll save the expensive stuff for a larger quad.
Old Mar 05, 2013, 11:43 PM
MT3003 is offline
Find More Posts by MT3003
Registered User
Hi. Could you specify the model numbers or descriptors for the tx/camera, receiver and lcd? Where are you ordering from? Thanks!
Old Mar 06, 2013, 12:02 AM
dapple63 is offline
Find More Posts by dapple63
Registered User
dapple63's Avatar
Quote:
Originally Posted by MT3003 View Post
Hi. Could you specify the model numbers or descriptors for the tx/camera, receiver and lcd? Where are you ordering from? Thanks!
Ebay. The vendor is tobeno2. No model numbers.

Item descriptions are:

5.8G Wireless mini spy Camera

5.8G wireless FPV RX RECEVIER (misspelled)

You might want to wait until I get it all in and working before you decide that's the vendor you want. It could be a disaster.
Old Mar 06, 2013, 12:30 AM
MT3003 is offline
Find More Posts by MT3003
Registered User
Understood and thanks. Will watch your progress with great interest.
Old Mar 24, 2013, 03:10 AM
irsyad17 is offline
Find More Posts by irsyad17
Registered User
Quote:
Originally Posted by cyberbillp View Post
http://www.ebay.com/itm/290833604226...84.m1497.l2649

It says 8g, but after I cut off that huge connector and put a losi on it, It weights 4.8 grams.
Hi,Is it hard to switch to huge connector to losi?
If you dont mind,where did you buy the losi connector ?
Is it with wires like this ->http://www.ebay.com/itm/Losi-LOSB086...item3f1b708a62
Or without like this->http://www.ebay.com/itm/Losi-Walkera...item3a7ef3831b

Thanks.
Old Mar 24, 2013, 07:38 AM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar

losi


Quote:
Originally Posted by irsyad17 View Post
Hi,Is it hard to switch to huge connector to losi?
If you dont mind,where did you buy the losi connector ?
Is it with wires like this ->http://www.ebay.com/itm/Losi-LOSB086...item3f1b708a62
Or without like this->http://www.ebay.com/itm/Losi-Walkera...item3a7ef3831b

Thanks.
The crimp tool for those pins is hard to find, and I don't have one that fits.
So I used the connectors with wires:
http://www.ebay.com/itm/Losi-LOSB086...item3f1b708a62

You have to solder (and heat shrink).
Old Mar 24, 2013, 01:35 PM
irsyad17 is offline
Find More Posts by irsyad17
Registered User
Quote:
Originally Posted by cyberbillp View Post
The crimp tool for those pins is hard to find, and I don't have one that fits.
So I used the connectors with wires:
http://www.ebay.com/itm/Losi-LOSB086...item3f1b708a62

You have to solder (and heat shrink).
Thanks for the reply.
One more question.When you cut the huge connector,there is only two wires right?So i can directly solder losi connector?
Sorry,Im quite noobie on soldering.I dont want to mess up..hehe.
Old Mar 24, 2013, 01:50 PM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar

solder


Quote:
Originally Posted by irsyad17 View Post
Thanks for the reply.
One more question.When you cut the huge connector,there is only two wires right?So i can directly solder losi connector?
Sorry,Im quite noobie on soldering.I dont want to mess up..hehe.
Yes, and watch the polarity.

Make sure plus is plus, so it matches chargers.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review JamesChen072's WLToys V959+modules review jameschen072 Mini Multirotors 1462 May 27, 2015 03:10 PM
Discussion WL Toys V959/V202/ SH 6047 Scorpion dankar04 Mini Multirotors 10 Apr 25, 2015 02:22 AM
Discussion WL Toys V959 chatelainjw Mini Multirotors 436 Mar 25, 2015 01:33 AM
Mini-Review WLtoys V959 Quad (with Video Recording Function) Mini-Review FyreSG Mini Multirotors 1314 Feb 19, 2015 10:45 PM