Long Strafer nose, Revision A - RC Groups
Thread Tools
This thread is privately moderated by borntoolate, who may elect to delete unwanted replies.
Mar 02, 2013, 12:58 AM
Bomber Bob
borntoolate's Avatar

Long Strafer nose, Revision A

B-25H & J solid nose forming

The original noses I made out of 1/16" styrene tended to be a bit thin at the business end where the eight .50's will be mounted. I opted to try a different material. I tried both 1/8" styrene as well as 3/32" black ABS.

Out of 2 attempts I managed to make 1 good 1/8" styrene part. I had better luck with the 3/32" ABS. I tried 4 times and came away with 3 good parts. The 1 failed attempt was operator error. Here are a couple of pictures.
Last edited by borntoolate; Nov 18, 2013 at 09:32 PM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Reichard Long Nose (Pinocchio) Fox 3.5m ARF Scale Glider hobbyclub Aircraft - Sailplanes (FS/W) 8 Jan 17, 2013 01:40 PM
Discussion Long nose vs short nose slopeiron Slope 30 Aug 28, 2007 07:45 AM