DJI Zenmuse H3-2D Gimbal for GoPro - Page 102 - RC Groups
Thread Tools
Jul 08, 2013, 11:58 PM
DJI Support - 107 Certified
Tahoe Ed's Avatar
Quote:
Originally Posted by Flykam
I am waiting to see some fast flying shots to see how much it shakes around,
All the shots I have seen do far are slowly steady flying or in really calm conditions.
I am not sure what you are looking for. Really unusable video in unrealistic flying conditions?
Sign up now
to remove ads between posts
Jul 08, 2013, 11:58 PM
HGT
HGT
Suspended Account
Anyone know where to get these in varying densities like the H3-2D comes with?

Is DJI offering a replacement pack?

Jul 09, 2013, 12:12 AM
DWA
DWA
1Corinthians 13:1-8
DWA's Avatar
Quote:
Originally Posted by Photoship One
Here's an A/B side by side comparison. Two cameras were used. One rigidly mounted to the copter and the other is output from the GoPro on the H3-2D.

Enjoy!

https://vimeo.com/69913957
That was great! Thanks for posting it.


Dave
Latest blog entry: Carbon Fiber Bird
Jul 09, 2013, 12:15 AM
Registered User
ZACATTACK's Avatar
I got to hand to this Gimbal..After seeing that video comparison, it reall got my wheels turning. I'm really impressed and thats hard to do. Im thinking real hard to get the best and forget the rest...great video quality, no jello and he was banking that s800 pretty good and that picture never budged. Wow!! Again, nice job DJI!!!
Jul 09, 2013, 12:16 AM
Registered User
Quote:
Originally Posted by HighGainTuning
I am guessing there will be a lot of this.... even from die-hard Alexmos Gimbal owners.
Lol well you guys didn't do a good job convincing me not to get one I love the gimbal because its so clean looking with no exposed wires like the other ones.
Jul 09, 2013, 12:17 AM
by Alary Design
Photoship One's Avatar
Quote:
Originally Posted by HighGainTuning
Anyone know where to get these in varying densities like the H3-2D comes with?

Is DJI offering a replacement pack?

We have them in two versions. Standard neoprene like the DJI units equivalent to about 30 durometer as well as silicone versions in a stiffer 60 durometer.

http://photoshipone.com/shop/index.p...roducts_id=212

http://photoshipone.com/shop/index.p...roducts_id=191
Jul 09, 2013, 12:40 AM
Flying Noob...
So I haven't had a chance today to crack open my Phantom to do the internal install, but I wanted to test fit it on the bottom of the phantom to figure out how I was going to mount my VTX which was velcro'd to the belly.

But.... I can't even get that far and I'm baffled. I've gone over it ten times and even discussed it with another owner.

The gimbal to vibration plate are two perfectly flat surfaces.. but these screws won't allow that.



That won't allow two flat surfaces to mate...... Now, the screws in that photo match exactly the ones mentioned in this DroneFly install, M2 5x5. (first min)
How to Install the Dji Zenmuse H3-2D gimbal on your Phantom Part 3 of 3 (9 min 19 sec)


I'm really scratching my head... I don't understand...

One more photo screwed into the vibration plate to show they fit...

Last edited by Thameth; Jul 09, 2013 at 01:00 AM.
Jul 09, 2013, 12:57 AM
Suspended Account
Well, I have decided Im keeping my Gimbal that I received today as I really don't think a few scratches will affect the gimbals performance or at least I hope it wont! Just too much shipping and waiting for them to ship another one. My PMU gets here Wed and then Ill hook it up and cross my fingers that it works like it should. If it has issues then I'll return it..... Just too much drama we need less Drama... : ) Ill keep you posted PS I got my first job request to use my F550 to shoot some Arial stuff so maybe I can make all this $$ I have spent in the last 4 weeks back...LOL
Jul 09, 2013, 02:00 AM
DWA
DWA
1Corinthians 13:1-8
DWA's Avatar
Quote:
Originally Posted by ZACATTACK
Wow!! What a difference, night and day...great stuff, should be used in a DJI commercial!
It could be used in a commercial, I know I am going to use it to help me sell my wife on it.

Thanks again Pototship One. If this works I owe you big time.


Dave
Latest blog entry: Carbon Fiber Bird
Jul 09, 2013, 02:44 AM
Registered User
Quote:
Originally Posted by Thameth
So I haven't had a chance today to crack open my Phantom to do the internal install, but I wanted to test fit it on the bottom of the phantom to figure out how I was going to mount my VTX which was velcro'd to the belly.

But.... I can't even get that far and I'm baffled. I've gone over it ten times and even discussed it with another owner.

The gimbal to vibration plate are two perfectly flat surfaces.. but these screws won't allow that.



That won't allow two flat surfaces to mate...... Now, the screws in that photo match exactly the ones mentioned in this DroneFly install, M2 5x5. (first min) http://www.youtube.com/watch?v=32NKqNzJSmw

I'm really scratching my head... I don't understand...

One more photo screwed into the vibration plate to show they fit...

The kit comes with some washers. You could use those to shim the screw
Jul 09, 2013, 06:02 AM
Flying Noob...
Quote:
Originally Posted by TonyTypeS
The kit comes with some washers. You could use those to shim the screw
Tried that, they're not thick enough. And secondly, with a kit this expensive I honestly should have to, it should work perfectly.
Jul 09, 2013, 06:17 AM
Registered User
EndOfDays's Avatar
@Thameth,
Just had a look, my screws fit perfectly, but in any case just take other screws and be happy.
You could also open your mind to the option, that there is a small chance that you did something not completely correct.

best regards
Ferdinand
Jul 09, 2013, 06:43 AM
Mad ExperiMentalist
mikerxer's Avatar
Does anyone know about the white landing gear legs shown on the F450 in this DJI video?

DJI How to Mount the Zenmuse H3-2D On Your F450 (3 min 26 sec)
Last edited by mikerxer; Jul 09, 2013 at 06:48 AM. Reason: Added video link
Jul 09, 2013, 07:07 AM
Registered User
Quote:
Originally Posted by Photoship One
As to the results of the experiment.... It's amazing. I have tried a handful of Alexmos/Martinez GoPro sized gimbals out there. While they perform nicely, I feel they don't match the performance level of the H3-2D. As of this moment it's my opinion the H3-2D is the one to beat. DJI has nailed it.
Thanks for the video, but you were taking it very easy. Can you do a full forward to full back.. to full left, to full right? Then do a full speed pass for a couple 100 yards? By that I don't mean full forward, to mid stick, to back, I mean strait from one extreme to the other.

A DJI H3-2D vs a quality Alexmos gimbal (ViacopterDD og Flyduino) would be great Please don't test it against a Chinese open sourced board gimbal (like the Arris etc). These are bad quality gimbals compared to the "real" BL gimbals, like the one's I mentioned above.
Jul 09, 2013, 07:43 AM
Registered User
An shootout Zenmuse H32D vs Tarot gimbal would be great also


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI Zenmuse 3-axis gimbal sidneyw Multirotor Drone Talk 5896 Nov 02, 2017 03:46 PM
Discussion DJI Zenmuse gimbal for Gopro piccoloflyer Multirotor Drone Talk 29 Jul 22, 2013 06:42 AM
Discussion Best 2 axis Gimbal for DJI 450/GoPro? FixedWing172 Aerial Photography 3 Jan 11, 2013 05:39 PM
Discussion Another DJI Zenmuse Z15 Gimbal thread skivvie Multirotor Drone Talk 5 Aug 03, 2012 04:00 AM
Discussion DJI Zenmuse Z15n Gimbal thread. UAVProducts Multirotor Drone Talk 277 Jun 05, 2012 07:40 AM