Micro 3DX! This is realy cool! - RC Groups
Thread Tools
Dec 30, 2003, 04:41 PM
Tee Sqaured
Thomas Manson's Avatar

Micro 3DX! This is realy cool!

Hi gang!

Uh oh! Im bord again! And when i found plans for Tim H's mini 26 inch 3DX, i had to give it a shot!

Not sure how long till i fly it, but hopefully sometime in january...

Last edited by Thomas Manson; Dec 30, 2003 at 04:45 PM.
Sign up now
to remove ads between posts
Dec 30, 2003, 04:42 PM
Tim H.'s Avatar
Ohhhh... Mini Me....
Dec 30, 2003, 04:42 PM
Tee Sqaured
Thomas Manson's Avatar
Here she is with my TX, she's realy tiny!

Not sure about power yet, but i got a little 180 size motor/GB sitting around without a home...
Dec 30, 2003, 05:33 PM
Tee Sqaured
Thomas Manson's Avatar

I have started glueing her together now, the H stab, fuse spar and control horns are setting as i write this...

Hopefully she will be in the air in a few days, it's snowing here, so imight have to wait untill it melts off....

Dec 30, 2003, 06:11 PM
40%, 5% whats the diff?
TeamSME's Avatar
I think a 24 inch plans should be put out. IPS 4.8 d gearing dual, 3s 250 etecs of 340 kokams. Congrats on the 3000 post Thomas.
Wait, I can shrink them on my adobe program, Nevermind.
Dec 30, 2003, 08:26 PM
Tee Sqaured
Thomas Manson's Avatar
I changed my mind and decided to finnish her off.

She's almsot ready to fly! I just need to add the ESC and wait for the rest of the epoxy to set!

I will fly her very soon!

Dec 30, 2003, 08:27 PM
Tee Sqaured
Thomas Manson's Avatar
last one...

In fact, i might take her out under the street lights...
Dec 30, 2003, 11:56 PM
Tee Sqaured
Thomas Manson's Avatar
Hey guys

I did fly it. With my motor/batteries is was severly under powerd, and since i have no funds to buy a proper power system for it, if anyone local wan'ts it there most welcome to have it.

It would pretty much do a powerd glide into the ground. It handeled nicely, but my set-up is to weak to fly it.

Im useing:

180 size motor, EPS 300 C gears
Home made gearbox
7 cell 200 mah nicad
10x4.7 prop.

Dec 31, 2003, 12:01 AM
electron liberator
jaywatay's Avatar
i wonder if one of the nippy motors or a cdrom motor would work on this plane.
Dec 31, 2003, 12:15 AM
Tee Sqaured
Thomas Manson's Avatar
It would probly work quite well, but i have no money to pay for one....
Dec 31, 2003, 01:20 AM
Mr. Electron
DeValk's Avatar
I will take it off your hands Thomas
Dec 31, 2003, 11:08 AM
Registered User
poobs's Avatar

I built the same plane but I think mine is a little bigger. I flew he once with a Electric Goldmine surplus G4046 motor with a home made 6 to 1 ratio gea box and 3 Li Po batteries.

Then I used a home made twin IPS C ratio motor with a 10x4.7 prop and 3 E-tec Li Po cells.

It flies great with plenty of vertical.
Dec 31, 2003, 11:51 AM
De-Brushed user
Hey Thomas,
what size batteries do you have? Are they all nicads? What motors do you have laying around?
Dec 31, 2003, 11:53 AM
Registered User
hey jaywatay

where do you fly in atlanta? i live in athens Ga, but i go to school at kennesaw state in atlanta and im looking for a place to fly.

Cary C.
Dec 31, 2003, 07:52 PM
Registered User
RiBell's Avatar
Do you have a charger that will charge a 2-cell Lipoly pack.

Thread Tools