Any decent ME/BF-110 3-views? - RC Groups
Thread Tools
Dec 29, 2003, 08:20 PM
Turrets Syndrome?
Bomberguy's Avatar

Any decent ME/BF-110 3-views?


I haven't been able to find any real good ME/BF-110 3-views that show rivet patterns etc. Any help here would be appreciated. My dad is building a Flair BF-110 and I will be detailing it for him.

Thanks, Ed
Sign up now
to remove ads between posts
Dec 29, 2003, 10:33 PM
EB-66C Team Member
J Morgan's Avatar
I had the same problem when I built my Gus Morfis Plan 110. Couldn't find anything decent on the net.
Try Bob Banka's Aircraft Documentation
3114 Yukon Ave
Costa Mesa, CA 92626
(714) 979-7279

He has several - $3.00 to $5.00 ea.

The Flair is somewhat larger than mine I believe, isn't it around 65" or so?
Here's a pic of mine- great flyer

J
Dec 29, 2003, 11:58 PM
Turrets Syndrome?
Bomberguy's Avatar
Thanks for the info, he's not too far from me I'll give him a try. That is a fantastic job you did on your 110. I wish I could do panel lines that nice. I believe I see a tail wheel, is it set up for ROG? I was thinking I might try the tiger mouth scheme on this one. Oh yea, it is a 65" WS.

Thanks again, Ed
Dec 30, 2003, 03:47 AM
Registered User
Helge Sondresen's Avatar
Ed

Have a look here:http://www.airwar.ru/other/draw_fw.html#9

There are several versions..

A friend of mine is building the Flair Bf110.Nice kit..

Helge
Dec 30, 2003, 03:54 AM
Registered User
Helge Sondresen's Avatar
think he's aiming for this.
Dec 30, 2003, 08:31 AM
EB-66C Team Member
J Morgan's Avatar
Ed,
Thanks. No, it's a belly flopper.Just put the tailwheel on because they were not retractable. I'm planning on building one at 66" though. Same size as the Flair I guess. Good luck.

J
Dec 30, 2003, 09:09 AM
Turrets Syndrome?
Bomberguy's Avatar
Thanks Helge, That's a great site, and I like the tiger mouth drawing, it will be a good reference.

This should be an interesting subject. Looks like a Deans antenna will fit in the scale location too. I'll post some pictures when it is done, wish my dad would hurry up on the airframe build! He's been a scratch builder for over 50 years, this is the first build-up kit he's had since he was a kid! (His Christmas present from me).

Ask and you shall receive - Thanks all!!

Ed


Thread Tools