Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 16, 2013, 01:42 AM
akdodger is offline
Find More Posts by akdodger
Registered User
Discussion

Dire lipo "situation"


Gents,
While charging small 2s lipo for my umx carbon cub, I fumbled one of the small lipos and it fell into the engine compartment of my wife's vehicle behind the washer fluid reservoir. Da$@ it all! Try as I might, I cannot rescue the lipo and cannot figure out how to remove the reservoir. I'm aware of the fire hazard and I'm seeking advice. Could I douse the area with salt water or some other liquid that would disable/destroy/render inert the lipo? Anyone have any thoughts? The car is a POS and the lipo is dirt cheap but my wife and children are not.

Thanks,
Dodger
Sign up now
to remove ads between posts
Old Feb 16, 2013, 05:21 AM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Yet another great example of why not to charge LiPolys under the hood.

Get help and remove the resovior if necessary. Salt water will not work even if battery is submerged in it for weeks 24/7.

If you fcan see it then [erhaps something very sticky on the end of a stick ( wodden dowel) or perhaps one of the flexiable mechanical claws. Once again find help such as a mechanic even a DIY tytpe who does most of their own maintenance work.
Old Feb 16, 2013, 06:26 AM
goldsworthy is offline
Find More Posts by goldsworthy
Suspended Account
Well, its a good thing it fell in the wifes car and not yours!. Take the car apart and ge the lipo out
Old Feb 16, 2013, 08:57 AM
hoppy is offline
Find More Posts by hoppy
Space Coast USA
hoppy's Avatar
Go to Harbor Freight
Find one of these, they are very handy.
24" 2-in-1 Pickup Tool http://www.harborfreight.com/24-inch...ool-94162.html
Use it to grab the wires from the pack.

I'd also pick up these at the same time.
15 Lb. Capacity Telescoping Magnetic Pickup Tool
Telescoping Mirror
Old Feb 16, 2013, 12:33 PM
rampman is offline
Find More Posts by rampman
Frankenstein recycled packs
rampman's Avatar
IMO strong metal fingers and lipo's are not a good match. While it will work it could short the wires or poke the small cells if not careful.
Rick
Old Feb 16, 2013, 12:57 PM
grimbeaver is offline
Find More Posts by grimbeaver
Registered User
Quote:
Originally Posted by rampman View Post
IMO strong metal fingers and lipo's are not a good match. While it will work it could short the wires or poke the small cells if not careful.
Rick
Hum he does have a point. But everyone is right, you gotta figure out how to get that battery out.
Old Feb 16, 2013, 01:25 PM
mrforsyth is online now
Find More Posts by mrforsyth
Registered User
Rick is right. Those metal fingers are crazy sharp and will make quick business of silicone insulation. I have a set of these that I put a few layers of small diameter (~1mm) shrink sleeving on each tine after filing the sharp edges to use for more delicate retrieval work.

Mark
RCG Plus Member
Old Feb 17, 2013, 08:19 AM
Boogie_ is offline
Find More Posts by Boogie_
Cajun-American
Boogie_'s Avatar
What kind of car is it?

I own a paint & body/mechanic shop and have worked on almost every kind of vehicle. Most of those washer jugs are easily removed.
Old Feb 17, 2013, 09:40 AM
gulio is offline
Find More Posts by gulio
That's a funny word
lipo magnet.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Sticky situation sandydr Waterplanes 31 Mar 08, 2013 05:17 PM
Help! what would you do in my situation? veggieslinger Off-road Cars 19 Jan 10, 2013 09:21 PM
For Sale Dire Drive System Great For honeybee Fp / Blade cp $15 shipped *Price lowered* HeliStyle Aircraft - Electric - Helis (FS/W) 3 Jul 29, 2009 07:09 PM
Discussion In dire need of some prayers! helinut2 Micro Helis 12 Mar 29, 2009 07:36 PM
Help! Dire need of HELP Chkmateu Radios 1 Nov 23, 2007 03:53 PM