5 x 3D Planes: 41" 3DHS EDGE, Skying 48" MXS, EF 60" EDGE 540T, Techone Su31, Wattapl - RC Groups
Thread Tools
This thread is privately moderated by Wingbreaker, who may elect to delete unwanted replies.
Feb 12, 2013, 12:40 PM
Trader Rating: 64
Video Juggernaut
Wingbreaker's Avatar
For Sale

5 x 3D Planes: 41" 3DHS EDGE, Skying 48" MXS, EF 60" EDGE 540T, Techone Su31, Wattapl


Hi there. I have for sale 3 3D planes.

First up is a Huck Buck from 3DHS (41" Edge) It is like new with a 72g omega motor **(no servos)**, spinner from Extreme Flight and APC 12x6 prop for $120.

Next we have a used Skywing 48" MXS foamie/fuselage 3D plane. It comes with Dualsky Xmotor 3542CA-6T, Castle Creations 50a ESC, 4 x Tower Pro MG90s Micro Servo. This thing has little to no damage. Tail wheel is wobbly and rudder has scraped on one hucks and landings and other than that it runs great. All for $200

The last and the least is my little Tech One RC 4 Channel SU 31 EPP built and ready to go. Everything works. Had some rough landings but is in really great condition. Needs good hinge tape on rudder and elevator. Motor mount has been repaired but is stronger than new. Great 3d Trainer!! Includes:
Fuselage length: 1070mm (42.1in.)
Wingspan: 1000mm (39.4in.)
Flying Weight:650--710g (with battery)
Motor: AS2216 KV 1250
ESC: 30 Amp
Propeller: APC 10x4.7sf
Servo: 8-12g micro servo*4pcs
4 x 3s 1300mah 20c lipos
1 x 3s 1000mah 40c

$125 with batteries, $95 without. Just need an RX.

NIB Skywing 48-in EPP Edge-540 (Full Fuse Blue) $140


******************Buy all for $900!!! $ 160 savings.***********************


Will sell airframes only too:

3DHS 41" Edge: $95
EF 60" Edge: $190
Skywing 48" MXS: $85

SU31 Airframe only N/A

***AL PLANES ARE LPU****


Thanks for looking.
Last edited by Wingbreaker; Feb 17, 2013 at 04:46 PM.
Sign up now
to remove ads between posts
Feb 13, 2013, 07:41 AM
Trader Rating: 12
God is Good
TMAC4123's Avatar
How do you like the rocket set up on the 60"?
Feb 13, 2013, 08:03 AM
Trader Rating: 64
Video Juggernaut
Wingbreaker's Avatar
its really nice, powerful and efficient. I get 10+ minute flights on 3300mah 6s. nothing comes down hot.
Feb 13, 2013, 11:21 AM
Trader Rating: 12
God is Good
TMAC4123's Avatar
Thanks! I just pickd one up and am looking for a good set up
Feb 13, 2013, 11:47 AM
Trader Rating: 64
Video Juggernaut
Wingbreaker's Avatar
if you want a good set up get a motrolfly. this is just a good bargain motor
Feb 13, 2013, 02:09 PM
Trader Rating: 12
God is Good
TMAC4123's Avatar
what motorfly motor?
And what brand Batts do you use?
Feb 13, 2013, 08:47 PM
Trader Rating: 147
Gravity is a cruel mistress...
Blucross's Avatar
Just chiming in here, I have the Motrofly DM4315-480 in my 60" edge with a 15x7 prop pulling around 1500 watts. For a real rocket you can prop up to a 16x8 (1700 watts!) which some of the guys are doing. The thing has unlimited stump pulling power. I run it with EM 35C 6s 3300's and glacier 6s 3300's and get anywhere from 5-6.5 mins depending on the throttle management.
Feb 13, 2013, 09:02 PM
Trader Rating: 64
Video Juggernaut
Wingbreaker's Avatar
You need to see the rocket motor go. holy mackerel its powerful and flight time on a 16x8 is ridiculous.
Feb 13, 2013, 09:08 PM
Trader Rating: 147
Gravity is a cruel mistress...
Blucross's Avatar
Quote:
Originally Posted by Wingbreaker
You need to see the rocket motor go. holy mackerel its powerful and flight time on a 16x8 is ridiculous.
I am considering it for the MXS or Laser coming out for a budget build. It's pretty nice eh? what kind of flight times you getting?

If you still have these planes when my next paycheck comes in, we might need to have a talk about one or two of them :P
Feb 13, 2013, 10:13 PM
Trader Rating: 64
Video Juggernaut
Wingbreaker's Avatar
Cool. The 60" is getting 10-12min flights on 16x8.
Feb 17, 2013, 12:59 PM
Trader Rating: 31
CFEdgeFLR
CFEdgeFLR's Avatar

PM'd


Sent you a PM about the 60"

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 5 x 3D Planes: 41" 3DHS EDGE, Skying 48" MXS, EF 60" EDGE 540T, Techone Su31, NIB WP Wingbreaker Aircraft - Electric - Airplanes (FS/W) 4 Feb 10, 2013 07:44 PM
Discussion Comparison 3DHS EXTRA 300 SHP 47 and EF MXS-EXP 48 and PA EXTRA 260 Jack Skip 3D Flying 115 Nov 10, 2011 05:56 PM
Found Looking for a 3D Hobby Shop (3DHS) 41" Edge 540 or other 3d plane. GlockDoc Aircraft - Electric - Airplanes (FS/W) 6 May 26, 2011 01:29 AM
Discussion 3DHS Edge + EF MXS = ARF Bash! JimTMich 3D Flying 9 May 08, 2011 07:09 AM