Thread Tools
This thread is privately moderated by jjmelo, who may elect to delete unwanted replies.
Old Feb 11, 2013, 08:20 PM
jjmelo is online now
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
Found

ArduPilot 2.5 - APM 2.5 or Arduflyer


Hi guys,

Before I order direct, does anyone have an Ardupilot 2.5 / Arduflyer (clone) + GPS board around? If so, please send me a PM.

Thanks!
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Sign up now
to remove ads between posts
Old Feb 11, 2013, 08:42 PM
Koo is offline
Koo
Find More Posts by Koo
Trader Rating: 31
Koo
A semi-advanced FPV newbie
Koo's Avatar
Right now they have it for a ridiculously low price on rctimer, so you should probably buy it there.
http://www.rctimer.com/index.php?gOo...2&productname=
Last edited by Koo; Feb 11, 2013 at 08:52 PM.
Old Feb 11, 2013, 09:07 PM
Derek_S is offline
Find More Posts by Derek_S
Trader Rating: 70
Videopilot
Derek_S's Avatar
Also, pay a little more and you can get it shipped from USA through a RCT dealer.

http://www.uavobjects.com/index.php?...roller=product

+

http://www.uavobjects.com/index.php?...roller=product
Old Feb 11, 2013, 09:13 PM
jjmelo is online now
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
UAVobjects is constantly going down...I haven't been able to access it.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 11, 2013, 09:31 PM
Derek_S is offline
Find More Posts by Derek_S
Trader Rating: 70
Videopilot
Derek_S's Avatar
Hmm, I have never bought from them, just seen the owner on these boards.

I have bought from here, but just not the AF2.5 clone. THis may not actually be it, but appears to be another unbranded clone:
http://witespyquad.gostorego.com/fli...flyer-2-5.html
Old Feb 11, 2013, 10:42 PM
G-unit is offline
Find More Posts by G-unit
Trader Rating: 181
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
what about this one, are they any good as a FC goes , and are they hard to set up ?
Thanks G http://www.uavobjects.com/index.php?...roller=product
Old Feb 11, 2013, 10:50 PM
lklansingkiter is offline
Find More Posts by lklansingkiter
Trader Rating: 42
Registered User

UAV objects


[Q




UOTE=G-unit;24108371]what about this one, are they any good as a FC goes , and are they hard to set up ?
Thanks G http://www.uavobjects.com/index.php?...roller=product[/QUOTE]

That is the same board as rctimer sells . He gets them from rctimer in bulk. You should buy from him because then you have customer service in the USA. It is a clone of the apm2.5 and completely compatible with the software. Be prepared to solder the pins in place some people mess this up if they don't have basic soldering skills.
Old Feb 11, 2013, 11:04 PM
cquian is online now
Find More Posts by cquian
Trader Rating: 300
Registered User
Quote:
Originally Posted by Derek_S View Post
Also, pay a little more and you can get it shipped from USA through a RCT dealer.

http://www.uavobjects.com/index.php?...roller=product

+

http://www.uavobjects.com/index.php?...roller=product
They are back ordered right now
Old Feb 11, 2013, 11:25 PM
G-unit is offline
Find More Posts by G-unit
Trader Rating: 181
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Quote:
Originally Posted by lklansingkiter View Post
[Q




UOTE=G-unit;24108371]what about this one, are they any good as a FC goes , and are they hard to set up ?
Thanks G http://www.uavobjects.com/index.php?...roller=product
That is the same board as rctimer sells . He gets them from rctimer in bulk. You should buy from him because then you have customer service in the USA. It is a clone of the apm2.5 and completely compatible with the software. Be prepared to solder the pins in place some people mess this up if they don't have basic soldering skills.[/QUOTE]

So this si a good FC?? and is it hard to set up, soldering is no big deal how hard is the software to use?
Thanks G
Old Feb 11, 2013, 11:36 PM
MuscleCBT is offline
Find More Posts by MuscleCBT
Trader Rating: 133
MuscleCBT
MuscleCBT's Avatar
Am I the only one who is stunned at the level of technology available to any and everyone for such tiny prices? This must be some kind of golden age of personal...what...? Hobby aviation? Spyware? Home movies? Amateur mad scientists? This kind of gear couldn't be had without tapping into a country's military budget ....day before yesterday.
People say there is no freedom left in the USA, but I just don't get it. I've got more computing power in my home office than went to the moon--heck, I've got it in my (smart phone-d) back pocket. Don't mean to sound political at all, but this a great time to be a home experimenter and one hell of a great country.
Old Feb 11, 2013, 11:40 PM
lklansingkiter is offline
Find More Posts by lklansingkiter
Trader Rating: 42
Registered User

Software and setup


The ardupilot Mega is well developed and supported. I am not near my computer or I would give you the link. Look up the wiki for apm and download mission planner which is what you will use for setup and tuning of your machine. The best performing and easiest board to set up is the open pilot cc3d however it does not yet have GPS so it will not loiter or return home.
Old Feb 11, 2013, 11:45 PM
G-unit is offline
Find More Posts by G-unit
Trader Rating: 181
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Quote:
Originally Posted by lklansingkiter View Post
The ardupilot Mega is well developed and supported. I am not near my computer or I would give you the link. Look up the wiki for apm and download mission planner which is what you will use for setup and tuning of your machine. The best performing and easiest board to set up is the open pilot cc3d however it does not yet have GPS so it will not loiter or return home.
OK i will look at it, is it any harder to setup then MK ? , i have set up a bunch of them, I was just wondering..
Thanks for the help. and if u do find the link can u post it please.
G
Old Feb 12, 2013, 12:31 AM
jjmelo is online now
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
Thanks guys...it seems like no one has an extra board. They're awesome by the way. This would be my second one. My first one is an RCtimer one, the Arduflyer, which I'm using to do FPV with my quad. Now I want it on a plane.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 12, 2013, 04:13 AM
jjmelo is online now
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
Pulled the trigger on a board from RCtimer. Thanks!
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion APM 2.5 / Ardupilot Mega / RCTimer Arduflyer Discussion Thread (updated 5/8/13) Mochaboy Multirotor Electronics 24137 Dec 03, 2016 05:24 PM
Discussion FC - Specifically Naza vs APM 2.5 / Ardupilot Cadriel Multirotor Talk 51 Nov 15, 2013 03:26 PM
Wanted WTB RCTimer, APM 2.5, or CC3D fordp FPV Equipment (FS/W) 2 Jan 23, 2013 09:12 PM
For Sale Ardupilot APM 2.0+Ublox GPS+ Airspeed+ Telemetery $125 Ifly101 FPV Equipment (FS/W) 0 Jan 15, 2013 10:38 PM
Sold DIY Drones APM 2.5 with ublox GPS Ifly101 FPV Equipment (FS/W) 1 Jan 09, 2013 02:02 PM