Thread Tools
Old Feb 11, 2013, 03:02 PM
mwarner57 is offline
Find More Posts by mwarner57
Boilerplate Flys Better
mwarner57's Avatar
Discussion

Cox/Nine Eagles Radio Compatibility?


I have a couple of 4ch Cox 2.4Ghz radios kicking around that I would like to use for a robot project for my 5 year old son. Are there any 4-ch. receivers out there that are compatible other than the standard 2-in-one? Also have a Parkzone Champ Tx that might work.

Thanks
Sign up now
to remove ads between posts
Old Feb 11, 2013, 03:36 PM
CorvetteC5 is offline
Find More Posts by CorvetteC5
Registered User
CorvetteC5's Avatar
Quote:
Originally Posted by mwarner57 View Post
I have a couple of 4ch Cox 2.4Ghz radios kicking around that I would like to use for a robot project for my 5 year old son. Are there any 4-ch. receivers out there that are compatible other than the standard 2-in-one? Also have a Parkzone Champ Tx that might work.

Thanks
Champ TX should be DSM2 which works nicely with Spektrum receivers and OrangeRX from Hobby King. Highly recommend both.

I have one Nine Eagles TX which should match your Cox but have not confirmed myself so will hold off on commenting.
Old Feb 11, 2013, 06:11 PM
mwarner57 is offline
Find More Posts by mwarner57
Boilerplate Flys Better
mwarner57's Avatar
Sweet! I just got some of the Orange Rxs in the mail to work with my Dx6i. Thanks for the info!
Old Jan 13, 2014, 04:49 PM
Previn is offline
Find More Posts by Previn
Registered User

TX bind Micro P47/Vapor


Hi Guys
Newbie to RC flying. I have a Nine eagles Ultra Micro P51 complete with radio RTF and a Parkzone Night Vapour no radio ARF.Is it possible:
- to transfer the electronics from the P51 to the Vapor
- or bind/link the radio from the P51 to the Vapor
BTW - I also have a Turnigy 9X 2.4G Radio

My aim is not to "have to buy another radio "specifically for the Vapor

Cheers
Old Jan 14, 2014, 07:29 AM
UNGN is offline
Find More Posts by UNGN
Power Wheels Guru
UNGN's Avatar
Quote:
Originally Posted by Previn View Post
Hi Guys
Newbie to RC flying. I have a Nine eagles Ultra Micro P51 complete with radio RTF and a Parkzone Night Vapour no radio ARF.Is it possible:
- to transfer the electronics from the P51 to the Vapor
- or bind/link the radio from the P51 to the Vapor
BTW - I also have a Turnigy 9X 2.4G Radio

My aim is not to "have to buy another radio "specifically for the Vapor

Cheers
The NE radio won't work with the DSM2 Vapor. The Turnigy won't fly the NE P-51, either.

You can get a DSM2 module for the 9X and it will fly the Vapor. Then you can get a used AR6400+servo (Going rate is less than $30) and swap them into the P-51 and will be able to fly both with the 9X. NE to DSM2 swaps are very easy.

Going forward, DSM2 RX's are available cheaply (Orange, Lemon and other knock off's), so its a good std to stick with.

After learning to use the 9X, you won't want to use the NE RTF TX anymore, anyway.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Found COX Sky Cruider or Nine Eagles Sky Runner - Prefer No Radio Just Airframe ShokWaveRider Aircraft - Electric - Airplanes (FS/W) 2 Jul 15, 2012 05:23 PM
Discussion Cox Sky Ranger, Extra 300 / Nine Eagles Sky Eagle Brushless & Spektrum ShokWaveRider Scratchbuilt Indoor and Micro Models 19 Jun 19, 2012 08:25 AM
Sold Cox/Nine Eagles 2.4 Ghz Micro Radio Setup - Complete - Unflown ShokWaveRider Aircraft - General - Radio Equipment (FS/W) 0 Dec 08, 2011 01:01 PM
Sold Cox/Nine Eagles 2.4 Ghz Micro Radio Setup - Complete - Unflown ShokWaveRider Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Dec 08, 2011 12:57 PM
Sold COX/Nine Eagles Micro 2.4 Radio system RX, TX & Motor ShokWaveRider Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Nov 16, 2011 09:27 PM