Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 28, 2003, 01:30 PM
Me likes Depron...
Pjotrrr's Avatar

Free plan for FuntanaMini by Didier


I'm building the FuntanaMini from plans by Didier, a fellow flyer here in Holland...

See also the build thread in foamies:

https://www.rcgroups.com/forums/show...hreadid=182433
Last edited by Pjotrrr; Dec 28, 2003 at 03:33 PM.
Sign up now
to remove ads between posts
Dec 28, 2003, 01:32 PM
Me likes Depron...
Pjotrrr's Avatar
Plan in zipped tiled pdf format:
Dec 28, 2003, 09:35 PM
Me likes Depron...
Pjotrrr's Avatar
Funtana Mini flown by Derk (5 Mb download):

http://home.quicknet.nl/mw/prive/pet...0freestyle.WMV
Dec 29, 2003, 12:36 AM
Registered User

Specs?


Wingspan?
Length?
AUW?
Power system/battery/prop?

Now I'm glad that I ordered twice as much Depron as I needed in my order a couple days ago! (I'm building a Little Ultimate Bipe from Foamies section...and one of these now, too!)

So many planes, and so little time.

Johnny B.
Dec 29, 2003, 03:55 AM
Me likes Depron...
Pjotrrr's Avatar
See also the build thread linked in the first post....

Wingspan is 90 cm, with Axi 2212/34 , 10x4,7 slowfly prop and Kokam 340 Lipoly AUW will be 280 grams/10 oz.

Peter
Last edited by Pjotrrr; Dec 29, 2003 at 03:57 AM.
Dec 29, 2003, 05:53 PM
Registered User
trondb's Avatar
Think I have enough 3mm depron around..

Awsome video !!

Trond
Dec 29, 2003, 09:09 PM
FoamyFactory.com
Tim H.'s Avatar
Wow, looks great pjotrrr!!!! You mentioned that Didier based it off my 3DX. If he has some CAD drawings of it, I could clean up the drawings and convert them to PDF and host it on my website if he would like. Or if you could send me the full scan (not tiled pdf), I could do it for him.

Looks like another 3D winner!

Tim H.
Dec 29, 2003, 10:09 PM
Registered User
Tim, hope you host these plans. Like your designs and have heard and seen nothing but good things about them. I've held out on building them because I already have T3d and T3dII, and I'd like to get build some true fuselage 3D planes for my next hangar additions.

It's really not hard to build up a fuse like this in Depron. Hope everyone checks out the little ultimate bipe in foamies as well. I'm building the LUB and this plane as my next two projects. Only thing I'd like to see is a true airfoil wing instead of a plate.
Dec 29, 2003, 10:21 PM
FoamyFactory.com
Tim H.'s Avatar
Yeah, I like that stuff too. But then we're getting out of the "cut it out, slap it together" simplicity of the flat plate stuff. I'm working on several built up designs too. Both have thier place and both are a blast. You should try a Yak or 3DX. You would be amazed at how well they fly.

Tim
Dec 30, 2003, 03:12 AM
Registered User
Hi Tim

I am glad you like it.
This is my second version of the Funtana mini, the first one was based on your 3DX but also with a build-up wing and box fuselage.
This one is totally re-designed.
The main thing that changed was, lighter wing construction, smaller wing, higher fuselage, different location tail section, landing gear and another small changes.
Now the airplane is totally couplings free and that is realy great!!!

Here a picture of version 1 in the middle and version 2
Dec 30, 2003, 09:27 AM
FoamyFactory.com
Tim H.'s Avatar
didier - It looks like your plans were hand drawn (from the looks of the tiled pdf) If you send me a scan of the full plans, I could put it into CAD, clean it up, etc. Let me know.

Tim H.
Dec 30, 2003, 01:19 PM
Me likes Depron...
Pjotrrr's Avatar
Hi Tim,

They are indeed handdrawed, I scanned them in 18 parts on my flatbed scanner, I can't help you with one full size scan though...

Peter
Dec 30, 2003, 02:55 PM
FoamyFactory.com
Tim H.'s Avatar
I'll do what I can. It'll be a while though...

Tim
Dec 30, 2003, 03:16 PM
Registered User
kitbasher's Avatar
When printing these plans in adobe,should i have (fit to page checked)? Thanks Mike
Dec 30, 2003, 03:31 PM
Me likes Depron...
Pjotrrr's Avatar
No, I don't think so, or print page 18 first, there is a line with inches and centimeters on it to check....

Peter


Thread Tools