Trader Rating: 62
Carbon Cub - SBach Brick - OFFER -
picked this up awhile ago..
here's the specs..
Carbon Cub wih an Sbach brick
I picked this up from a seller who had the usual V1 problems, but replaced the block with an SBach.
It was crashed lightly, bit cracked the wing, but was repaired with ca glue.
I wanted the lights to work,so i ordered a harness to adapt into the sbach board.
Then i (dumb move on my part) broke a wire on a wing servo at the plug. Tried to solder but it didnt work, since my soldering skills are way poor..
It needs some tlc, the servo wire needs to be re-soldered to the plug better, to plug into board.
Tail was broken off during shipment when I purchased, so it' has been glued (CA) back on as well.
-Soldering on servo wire.
- prop adaptor (broke on nose dive crash..)
- wall ac cord if you want to plug charger into wall socket
- 1 battery
- charger leads
- gws 5030 prop
- orig cub prop
Pay pal -
Last edited by Oboingo1; Feb 12, 2013 at 02:34 PM. Reason: Add more
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||umx sbach 342 3d TRADE FOR CARBON CUB||Kilroy96||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||0||Feb 09, 2013 12:24 PM|
|Sold||E-flite carbon cub||rcartie||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||2||Jan 08, 2013 11:46 AM|
|Sold||Carbon Cub with Floats - newest version||Air Candy||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||2||Jan 07, 2013 06:11 PM|
|Discussion||Carbon Cub new holes?||esc25||Scratchbuilt Indoor and Micro Models||3||Jan 04, 2013 01:55 PM|
|Discussion||Champ with carbon cub floats||ScottyCam009||Scratchbuilt Indoor and Micro Models||3||Jan 03, 2013 11:34 AM|