Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 09, 2013, 06:20 AM
cloud_9 is offline
Find More Posts by cloud_9
Jim in the Desert
Discussion

Before you buy a Nitroplane...


Look at this:

Nitroplanes Kadet Senior ARF maiden! See review at the end. (2 min 55 sec)


You get what you pay for.
Sign up now
to remove ads between posts
Old Feb 09, 2013, 07:30 AM
hare is offline
Find More Posts by hare
Like a Tortoise
hare's Avatar
If you were dis satisfied with Nitroplanes, you should tell everyone what you think, instead of picking on a persons video without their permission, I rather hear what you have to say about Nitroplanes, than just airing a video, One video, I have bought from them and if I had an issue with Nitroplanes I do not blame them, because a product was bad, that was a decision we all take.

Opinionated.
Old Feb 09, 2013, 08:14 AM
BigIron357 is offline
Find More Posts by BigIron357
25+ years of RC flying
BigIron357's Avatar
Why is a nitro powered plane rant in the electric flying section?
Old Feb 09, 2013, 09:31 AM
scottc39 is online now
Find More Posts by scottc39
Registered User
scottc39's Avatar
Cloud_9
dont buy a eflight pulse 25 the landing gear dose the same thing, we dont know how hard the landing was, also all arfs are glued with super glue.
Old Feb 09, 2013, 09:37 AM
starcad is offline
Find More Posts by starcad
AMA 667982 KG7NKY
starcad's Avatar
My question is, Why didn't the person who owned the plane go through and re-glue everything before flying. I do that on every ARF I buy and especially the landing gear. Most of the time it either has to be replaced or beefed up somehow before any maiden.

BTW I have several Nitro Planes models and all fly fantastic as I still have my big Nitro Planes Pole Cat electrified.
Old Feb 09, 2013, 09:59 AM
rafe_b is offline
Find More Posts by rafe_b
Registered User
How do you reach all the joints that need re-gluing? Landing gear failures are a dime a dozen, we all deal with it. Even the guy in the video seemed to take it in stride. I think at least half my fleet has needed LG repair at one point or another, and on some planes, several times over.
Old Feb 09, 2013, 10:08 AM
blvdbuzzard is offline
Find More Posts by blvdbuzzard
Registered User
Well lets see, " a not so hard landing in the grass"

Also he knows he should have checked the joints for glue and re-glue them.

He praises the plane as the best flying kadet he has ever flown.

cloud_9, seems the guy was happy with the plane even though the gear came off.

I have a Giles 202, (2) low wing trainers, a high wing trainer, (5) foam planes, (2) gliders from Nitro. All have been great flying planes after I checked over the construction and added glue every where I could reach.

I do not trust the assembly of any plane I buy to some one working in a factory assembly line. They use Ca and hot glue to glue everything. I epoxy and or glass and epoxy the firewalls where I can. A little work on my part goes a long way in making them a better plane.


Buzz
Old Feb 09, 2013, 10:16 AM
osidak is offline
Find More Posts by osidak
Registered User
been flying "nitro" planes for 27 years and have never used expoy on anything by the firewall and that was primarly to keep the fuel from soaking in. Did look like they had some poor glue joints though.

I have always found CA to be the better glue as it will soak into the wood and make a stronger joint. Typically I found the wood would break away from the joint and not at the joint. Also epoxy is heavy and I always build a plane to fly..... not crash
Old Feb 09, 2013, 10:35 AM
1320fastback is offline
Find More Posts by 1320fastback
Detroit 2-stroke junkie
1320fastback's Avatar
Every low dollar ARF always always always has to have every reachable joint CA'ed before maiden.

Always inspect landing gear attachment structure and feel free to reinforce it in anyway you can with the access that you have.

Is also a option to open up the covering and reinforce. I has done this with a few before ever flying them.


This is nothing new.
Old Feb 09, 2013, 12:13 PM
hare is offline
Find More Posts by hare
Like a Tortoise
hare's Avatar
So if I bought another plane it would not happen......

Preflight inspections are essential....
Old Feb 09, 2013, 12:30 PM
Trisquire is offline
Find More Posts by Trisquire
Intermediate Multi
Trisquire's Avatar
I don't see a Kadet on the Nitroplanes website. How is it that they're allowed to sell what used to be a Sig kit? He's lucky the landing gear broke away as easily as it did. Otherwise, more extensive damage would have occurred. In the old days, we used to attach landing gears with rubber bands, so they would break away without causing any damage.
Old Feb 09, 2013, 12:38 PM
Thomas B is offline
Find More Posts by Thomas B
Electric Coolhunter
Thomas B's Avatar
Quote:
Originally Posted by Trisquire View Post
I don't see a Kadet on the Nitroplanes website. How is it that they're allowed to sell what used to be a Sig kit? He's lucky the landing gear broke away as easily as it did. Otherwise, more extensive damage would have occurred. In the old days, we used to attach landing gears with rubber bands, so they would break away without causing any damage.
The story is that Sig cancelled a big ARF order and Nitro ended up with the kits.
RCG Plus Member
Last edited by Thomas B; Feb 09, 2013 at 12:54 PM.
Old Feb 09, 2013, 12:39 PM
Thomas B is offline
Find More Posts by Thomas B
Electric Coolhunter
Thomas B's Avatar
...
RCG Plus Member
Latest blog entry: 2014 events and travel
Old Feb 09, 2013, 12:44 PM
DustBen is offline
Find More Posts by DustBen
Registered User
DustBen's Avatar
Solution 1. Build your own plane and know you built something to last.

Solution 2. Take some fine sawdust from the belt sander and make dry fillets at all the stressed areas, then dribble thin CA onto the dry fillets. (I've been building 40 years and have found these reinforcements to be much stronger than using tri-stock with epoxy or any other method).
Old Feb 09, 2013, 12:54 PM
Mike_Then is offline
Find More Posts by Mike_Then
I hate waiting for parts
Mike_Then's Avatar
Quote:
Originally Posted by scottc39 View Post
Cloud_9
dont buy a eflight pulse 25 the landing gear dose the same thing, we dont know how hard the landing was, also all arfs are glued with super glue.
That's quite a broad statement, don't you think? Have you pulled the covering off all ARFs and seen that they are indeed glued with super glue?

And yes, this should either be in the Nitroplanes.com section or at the very least the Fuel section.
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Before I buy a Stryker.... Idoitall Flying Wings 2 Jan 20, 2013 08:07 PM
Alert I sold futaba 9c Guy Wants Refund Before Returning Radio Forrest Gump 23 Trader Talk 87 Jan 10, 2013 06:14 PM
Careful! Safety reminder! Remove the prop before servicing your plane! oneagleswings Beginner Training Area (Aircraft-Electric) 11 Jan 04, 2013 10:46 PM
Discussion Does nitroplanes or the manufacturer test EDF units before shipping? texbird Foamy EDFs 3 Feb 07, 2011 07:39 PM
Before buying the Stick, some questions... Magna Parkflyers 4 Jun 26, 2001 02:29 AM