A319 scale flaps and spoilers - RC Groups
Thread Tools
Feb 06, 2013, 01:50 PM
Registered User
Video

A319 scale flaps and spoilers


hi all
thought id post some videos of the work so far on my A319 jet
id welcome your thoughts
Sign up now
to remove ads between posts
Feb 06, 2013, 02:15 PM
Registered User
Hollywood2979's Avatar
Pretty crazy cool looking, love the hinging out and down, then the up and in, what is the wingspan going to be, it looks like it may be heavy.
Feb 06, 2013, 02:18 PM
Registered User
wingspan is 2.5m and yes its not light i have not weighed it yet i dont think i want too!
Feb 06, 2013, 02:20 PM
Up-Out-&-Gone
demondriver's Avatar
Quote:
Originally Posted by madaboutjets
wingspan is 2.5m and yes its not light i have not weighed it yet i dont think i want too!
Looks simply amazing Sir! I would weigh it, that way you'll know what kind of power you will need to get her airborne & also determine how long her takeoff run will be.
Latest blog entry: My RC 737 Assembly line!
Feb 06, 2013, 02:49 PM
Registered User
cheers demon!
yes i will weigh it once the other wing is complete along with the landing gear its my first scale project so a lot of things are still in experimentation!
Feb 06, 2013, 04:38 PM
Registered User
Rookie2008's Avatar
Nice work.
Feb 06, 2013, 04:49 PM
HD FPV on a 4m glider
thats amazing
Feb 06, 2013, 05:38 PM
Registered User
fly2bob's Avatar
VERY cool, but you already knew that. Question; are you going to combine use of the flaps and spoilers w/ the ailerons for roll authority? I'm thinking you might need to in order to control an expected heavy model. Although I'm not sure how you would do that. I believe that real airliners do this but for example the spoilers move at a much smaller amount than the aileron defection so not to create too much drag during roll. One idea to reduce some weight is to connect the four outer spoilers together using .10 mil mylar on the back side of them so you can reduce the number of servos per wing half by three.
Feb 06, 2013, 09:18 PM
A Global Force For Good
jmpdgs's Avatar
Impressive fabrication. Now I need to figure out a way to do that in foam at half the size and a quarter of the weight.

Thanks for sharing that, I'm inspired.
Cheers
Joe
Feb 06, 2013, 10:28 PM
casinojoe1203
Great Job man, Looks unbeleivable
Feb 06, 2013, 11:10 PM
BadPilot
badpilotto's Avatar
WOW very impressive!!!! It really doesn't look too heavy too me, two 40hp motors should work (JK). Very nice design, to lighten it, if it is really too heavy, could you make the hinging out of plastic or CF?

John
Feb 07, 2013, 02:11 AM
Registered User
On the full size aircraft roll is controlled with the outer 4 spoilers how much I'm not sure yet but max deflection for the spoilers is 35degrees according to the manual obviously that would be way too much as it would just kill the lift that's only used on the ground when the inner flap is also actuated
Yes I'm tempted to bind the four spoilers together to save on weight and complexity !
Also on the full size the ailerons droop 5degrees when full flap is deployed this shouldn't be a problem if I can get the right gear
Feb 07, 2013, 02:14 AM
Registered User
Using plastic for the mechanism would have been possible except for the main linkage which is bent to fit on the end of the flap bracket
Feb 07, 2013, 04:13 AM
Registered User
fly2bob's Avatar
Quote:
Originally Posted by madaboutjets
On the full size aircraft roll is controlled with the outer 4 spoilers how much I'm not sure yet but max deflection for the spoilers is 35degrees according to the manual obviously that would be way too much as it would just kill the lift that's only used on the ground when the inner flap is also actuated
Yes I'm tempted to bind the four spoilers together to save on weight and complexity !
Also on the full size the ailerons droop 5degrees when full flap is deployed this shouldn't be a problem if I can get the right gear
Now that I think about it more, it should be possible to link the outer four spoilers (o4s) to the ailerons and have them deflect at a lesser amount than the ailerons. You said the roll is controlled by the o4s, but I would think that so do the ailerons. Anyway, if you connect the o4s together, use one servo for them, y-harness them and put them in a rx ch, then do a prog mix and slave the o4s to the ailerons and 30% or so for up and zero for down. What do you think?
Feb 07, 2013, 04:56 AM
Registered User
Yes your right forgot to mention ailerons for roll of course!
That's a good idea not sure if connecting the spoilers and aileron with a y harness would work as I'm planning on using the spoilers for ground brakes as full size


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Depron A319 1:22 scale project SergioFMMI RC Airliners (Commercial, Cargo, Troop Carrier) 231 Jan 30, 2015 08:25 PM
Sold REDUCED - 40N Giant Scale 6s w/flaps, lights & retracts 1700mm EPO - $SOLD shipped ross_badger Aircraft - Electric - Airplanes (FS/W) 9 Jan 14, 2013 11:18 AM
Sold P-40N Giant Scale 6s w/flaps, lights & retracts 1700mm EPO (PNF) ross_badger Aircraft - Electric - Airplanes (FS/W) 5 Jan 11, 2013 11:20 AM
Build Log Airbus A319 | 1:20 Scale | EDF | Dollar Tree Foam preelude RC Airliners (Commercial, Cargo, Troop Carrier) 23 Dec 22, 2012 02:36 PM
Discussion scale A319 need help madaboutjets Electric Ducted Fan Jet Talk 5 Mar 09, 2011 07:08 PM