eagle tree guardian - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 05, 2013, 07:30 PM
Registered User

eagle tree guardian

I installed and tested by moving on all axis,the control surfaces only move a small amount.Gains are all the way up. Control surf. move normally when using sticks.I am using dx5,but recently purchased dx7. could it have something to do with transmitter? receiver is 6 channel.
Sign up now
to remove ads between posts
Feb 22, 2013, 12:37 PM
Registered User
moto mike's Avatar
I haven't used the eagle tree but did use another 3 axis gyro the orange x. And control surface movements were small. I think that it reacts quickly enough that small inputs are all that is needed. If you have too large movements, the danger of airframe shaking oscillations result.

I think the recommendations are that you start with just perceptable movement when you twist it about by hand.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion eagle tree guardian bushpilot05 Radios 2 Feb 24, 2013 03:04 PM
Discussion easystar + osd eagle tree + guardian xipho3 FPV Equipment 1 Jan 04, 2013 11:40 AM
Sold Eagle Tree Guardian Stabilizer Crist Rigotti FPV Equipment (FS/W) 2 Mar 20, 2012 03:19 PM
Wanted Eagle Tree Systems Guardian shlomi4046 FPV Equipment (FS/W) 1 Nov 13, 2011 12:11 AM
Wanted Eagle Tree Guardian module ajhaggerty FPV Equipment (FS/W) 0 Oct 06, 2011 01:08 AM