Thread Tools
Feb 09, 2013, 03:06 PM
Winging it >
leadfeather's Avatar
From your message:
" regarding wii board; you have suggested this in one the post to me as wii board http://www.hobbyking.com/hobbyking/s...elta_AUX_.html and this is i found in http://www.hobbyking.com/hobbyking/s...er_w_FTDI.html which is real can you please send me a correct model web site link of wii board that can be used in any RC formats like VTOL, quadrator, aeroplane, helicopter and so on..
(in future to me).

Any Wii board should work fine for your project. The differences in the boards are the extra devices and features they may have such as barographs and magnetometers etc.

The Wii can do most anything you will ever need. The trade off is that it takes more programming. You will need the Wii board, the FTDI interface, a USB cable and a computer. You will have to download some software from the internet in order to program and tune your craft. It is a lot to learn and will take some time.
Sign up now
to remove ads between posts
Feb 10, 2013, 04:19 AM
NoT iNtElLiGeNt
what is FTDI interface
Feb 10, 2013, 05:56 AM
Winging it >
leadfeather's Avatar
Check out the photo below. the larger green device is the Wii flight control board. The smaller blue device is the FTDI interface. It is required to connect the FCB to your computer. The FTDI plugs into your Wii board using the pins marked FTDI. A mini USB cable plugs into the FTDI and connect to your computer.
Feb 10, 2013, 06:15 AM
NoT iNtElLiGeNt
hope it is mandatorily given by the company..... for every product
Feb 10, 2013, 08:11 AM
vtol fan
nadine's Avatar
I bought mine from Rctimer yesterday but with separate FDTI !...
It's the same like crius mwc board IMHO.
http://www.rctimer.com/index.php?gOo...5&productname=
and programmer...
http://www.rctimer.com/index.php?gOo...4&productname=
Regards....
Feb 10, 2013, 08:19 AM
Registered User
Siggypoo72's Avatar
Subscribed!
I'm blueprinting a micro EDF Cobra Rattler from GI Joe, basically an A10 with the main engines moved to pivoting wings and a third engine between the tails.
This article will be my main reference. Thanks a lot.
Feb 10, 2013, 04:20 PM
NoT iNtElLiGeNt
in this thread we are dealing with VTOL by two throttles only....

any have our frd's will help you over it.. try to keep ur path separate from mine in order to avoid confusion....




Quote:
Originally Posted by Siggypoo72
Subscribed!
I'm blueprinting a micro EDF Cobra Rattler from GI Joe, basically an A10 with the main engines moved to pivoting wings and a third engine between the tails.
This article will be my main reference. Thanks a lot.
Feb 10, 2013, 04:25 PM
Registered User
Siggypoo72's Avatar
Oh, hey, I'm just saying I'll refer to this topic for guidance. I'll do my own work in my own topic.
Was thanking you, not hijacking...
Feb 11, 2013, 06:13 AM
NoT iNtElLiGeNt
thats okey.. i am just trying to tell you... to make diff between ur doubts and mine with out clubbing
Feb 11, 2013, 08:13 AM
vtol fan
nadine's Avatar
Quote:
Originally Posted by jyothibasu1k
thats okey.. i am just trying to tell you... to make diff between ur doubts and mine with out clubbing
Feb 11, 2013, 10:38 AM
Registered User
Perhaps you meant "clashing"?
Feb 12, 2013, 12:33 AM
NoT iNtElLiGeNt
hope u got my mind..

Quote:
Originally Posted by Brandano
Perhaps you meant "clashing"?
Feb 12, 2013, 02:26 AM
1400 watt RW Zephyr
matwelli's Avatar
There is a certain irony in 6 off topic posts discussing not posting off topic

Opps - make that 7 posts
Feb 13, 2013, 10:25 AM
NoT iNtElLiGeNt
here are today's experiment video's

check 6 (2 min 39 sec)


check 7 (1 min 16 sec)


check 8 (1 min 45 sec)


check 9 (1 min 54 sec)


check 10 (0 min 6 sec)


check 11 (0 min 46 sec)
Feb 13, 2013, 10:40 AM
Registered User
Siggypoo72's Avatar
As a tail-dragger it seems more unstable. Why did you decide not to use tricycle, or are you just satisfying curiosity?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Idea Tilt Rotor Project rcjetflyer2 VTOLs 35 Feb 27, 2013 02:12 PM
Discussion EPP Tilt Wing Free Wing CNC wire cut/blade cx foamy freewing a9wr816t74 Foamies (Scratchbuilt) 37 Feb 27, 2011 06:05 PM
Discussion Make the servo move 180 Degree useful for pan and tilt projects Talajouy FPV Talk 2 Aug 11, 2010 05:13 AM