Phoenix - Gaining Altitude When It Shouldn't? - RC Groups
Thread Tools
Feb 02, 2013, 09:49 PM
Registered User
gapi's Avatar

Phoenix - Gaining Altitude When It Shouldn't?

Using a Devo 10 Flying a Blade CX2 in Phoenix Pro 4 and in a nice hover,............

When I use Aileron or Go forward or backwards with my hand not on the throttle it starts gaining altitude on its own. It will continue as far as it can go if not corrected.

I have a similar problem with a Blade SR120 model but it drops.

I have tried several other models that do not do this to that degree. Sure its going to happen some but these are too much.

I figure its gotta be a TX setup but am stumped.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion quadcopter gains altitude when yawing? Lpbug Multirotor Drone Talk 2 Jul 02, 2013 02:48 AM
Discussion Blade 120 SR Cannot Hold Altitude W/Phoenix gapi Simulators 6 Feb 09, 2013 05:55 PM
Discussion Shouldn't the DEA have to communicate when they are going to invade my airspace? benderfly FPV Talk 13 Aug 29, 2012 01:01 AM
Discussion Using 3s when i shouldn't use more than 2s KillerCut Electric Plane Talk 37 Jun 01, 2011 12:02 PM
hummingbird CP- won't gain altitude! canonrebel Micro Helis 12 Nov 08, 2004 06:52 PM