Thread Tools
Feb 01, 2013, 09:58 AM
Registered User
Discussion

Thunder tiger eb4 s2.5pro


I am having problems setting my idle. Had the car working but kept creeping forward,played with idle and now it starts then stops not long after. Any help ?
Sign up now
to remove ads between posts
Feb 01, 2013, 10:38 AM
Registered User
wparsons's Avatar
Sounds like you adjusted it too low to idle properly. Having a nitro vehicle creep a tiny bit at idle isn't abnormal, if it bugs you just put on the brakes a bit while resting.
Feb 01, 2013, 09:10 PM
Kowalski !.....Options
mredzadventure's Avatar
You want about a 2mm gap in the carb at idle. Adjust back to where it was running good you might have to keep the brake on a bit see you might be able to adjust it in the radio. You might be able to improve idling with a newer glow plug


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion need help with my Thunder tiger eb4 s2 pro matti07 Nitro and Glow Power Cars 8 Jan 21, 2007 03:34 AM
Help! Thunder tiger eb4 s2 pro - pull start matti07 Nitro and Glow Power Cars 2 Jan 21, 2007 03:25 AM
Discussion Thunder tiger eb4 s2 pro thuglyf Nitro and Glow Power Cars 5 Dec 26, 2006 11:01 AM
Discussion Thunder tiger eb4 s2 pro help thuglyf Nitro and Glow Power Cars 2 Nov 17, 2006 04:42 PM