Thread Tools
Feb 01, 2013, 04:08 AM
Registered User
Thread OP
Discussion

DIY Telemetry System base on TI CC110L RF BoosterPack


I have an idea to build a telemetry system for my rc plane. This telemetry system isn't used for FPV planes, just for normal plane(range >200m) and just measuring cells voltage.
I think the CC110L RF BoosterPack can be used to build this project. I'm going to buy one.
Do you have any idea for this project?
Sign up now
to remove ads between posts
Feb 02, 2013, 04:17 PM
Registered User
There's lots of CC11XX based radio modules out there ready to go. The link you posted is to a part of a dev kit.

If you want a better radio that's actually ready to go, check out...
https://www.hobbyking.com/hobbyking/s...it_915Mhz.html

It's a HopeRF module based radio, similar to what 3DR and OpenLRS use. Pretty hard to beat for $30.
Mar 06, 2013, 08:58 AM
Registered User
Thread OP

prot


This is prototype project. I need rf tranceiver modules to connect two mcu together. They use Uart or Spi interface. Hobbyking's module was designed for connecting mcu to computer.
Some chinese module use nRF24l01 chip. Many Adruino projects use this module with spi interface. Seller said: their goods can communicate up to 1000m, but i don't think so. I believe US module is better than. But sad news: TI don't sell this module to Vietnamese customer. Maybe I must use nRF24l01 for my project.

http://www.aliexpress.com/store/prod...727064493.html


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Land Based FPV System (what's best)? tsull FPV Talk 12 Feb 26, 2013 04:52 AM
Help! How to easily setup voltage telemetry on FRSky DHT DIY Kit and D4R-II receiver? Atleee Radios 1 Oct 16, 2012 10:40 AM
Discussion FrSky DIY Telemetry on Airtronics RD8000 Analytica Radios 2 May 25, 2011 09:29 PM
Discussion FrSky DIY Telemetry on Airtronics RD8000 Analytica DIY Electronics 0 May 24, 2011 09:33 PM
DIY: In flight telemetry system. Jim McPherson DIY Electronics 24 Mar 29, 2004 01:37 PM