Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 11, 2013, 11:47 AM
swampflyer is offline
Find More Posts by swampflyer
Registered User
ive allready been working on that...

been getting her on the sim. lately.. this wing, dialed down, seems a good tool for a newby to pick up some basic orientation skills.
Sign up now
to remove ads between posts
Old Feb 11, 2013, 01:38 PM
swampflyer is offline
Find More Posts by swampflyer
Registered User
well, during lunch i added the mixes as suggested in the video to get the full throws, maxed them out with travel adjust ending up around 110% and its perfect, without hitting. flew her around for a minute or two in a ton of wind...

WOW.

its a different animal all together now.

with that mix switch and D/R i can get 3 positions now. which is nifty. what were nice tight loops are just ridiculous now and you can hover the thing for a second or two with a bit of wind blowing at you. rolls are much much faster as well.

thumbs will have to catch up. hahaa.

i did have what seemed like something catching inside the motor though. i worked it back and forth by hand and it quit catching. It will occasional stutter when throttle is applied as well? after you play with the wire connection it will stop... ?
Old Feb 12, 2013, 08:18 AM
Dan5.0 is offline
Find More Posts by Dan5.0
Suspended Account
Dan5.0's Avatar
check your solder joints from motor to ESC, sounds like the culprit
Old Feb 12, 2013, 09:13 AM
swampflyer is offline
Find More Posts by swampflyer
Registered User
will do, thanks.



flew the larger prop yesterday for the first time.

seems a bit slower, smoother. shorter flight time. i like the sound though. haha.

rolls are much much faster. its just ton of fun.
the quickness with which it changes orientation and having to use only the right stick on the transmitter seems to be making me a better pilot with my CYL as well.. flew her yesterday and it just seemed so much smoother. I typically use the rudder alot on my planes... find my left thumb still trying to turn the wing. lol
Last edited by swampflyer; Feb 12, 2013 at 09:20 AM.
Old Feb 12, 2013, 09:25 AM
cdee is offline
Find More Posts by cdee
Team Twisted!
cdee's Avatar
Quote:
Originally Posted by swampflyer View Post
will do, thanks.



flew the larger prop yesterday for the first time.

seems a bit slower, smoother. shorter flight time. i like the sound though. haha.

rolls are much much faster. its just ton of fun.
the quickness with which it changes orientation and having to use only the right stick on the transmitter seems to be making me a better pilot with my CYL as well.. flew her yesterday and it just seemed so much smoother. I typically use the rudder alot on my planes... find my left thumb still trying to turn the wing. lol
.
+1 on the left thumb... lol..!!
.
cdee
.
Old Feb 12, 2013, 02:45 PM
hercdriver7777 is offline
Find More Posts by hercdriver7777
Team Extreme! Team Twisted!
hercdriver7777's Avatar
On mine I mixed in ail differential to the rudder stick. That helps a little with giving some input to the left hand. After all these years flying 3D planes I can't just turn off the left hand.

Give it a shot!
Old Feb 12, 2013, 06:36 PM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Quote:
Originally Posted by hercdriver7777 View Post
On mine I mixed in ail differential to the rudder stick. That helps a little with giving some input to the left hand. After all these years flying 3D planes I can't just turn off the left hand.

Give it a shot!
So you're running no differential on the ail stick? yet on the rudder stick? Watching the rolls on some of the videos it looks like some differential might be a good thing, but why on one stick and not the other? Are you just trying to simulate yaw on the rudder stick?

Azarr
Old Feb 12, 2013, 09:09 PM
hercdriver7777 is offline
Find More Posts by hercdriver7777
Team Extreme! Team Twisted!
hercdriver7777's Avatar
Left rudder - left ail Up. Right rudder - right ail up.

Gives some yaw effect but also, and more important, gives the left hand something to play with.
Last edited by hercdriver7777; Feb 13, 2013 at 10:00 AM.
Old Feb 12, 2013, 11:25 PM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
I'll have to try it, not quite grasping what it accomplishes, seems backwards. On an elevon plane I'll run R master, A slave but always in the same direction.
L rudder - left aileron up etc.

Azarr
Old Feb 13, 2013, 09:19 AM
swampflyer is offline
Find More Posts by swampflyer
Registered User
Quote:
Originally Posted by hercdriver7777 View Post
On mine I mixed in ail differential to the rudder stick. That helps a little with giving some input to the left hand. After all these years flying 3D planes I can't just turn off the left hand.

Give it a shot!
i'll give that a try.. might help with trying to get some of those rolls going like in your vid., which is awesome by the way.

Old Feb 13, 2013, 10:00 AM
hercdriver7777 is offline
Find More Posts by hercdriver7777
Team Extreme! Team Twisted!
hercdriver7777's Avatar
You guys are right, I wrote it backwards. Post edited. Sorry.
Old Feb 13, 2013, 11:07 AM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
FWIW, on an elevon wing I often use the rudder stick as a "dual rate" for the ailerons by changing the mix values higher or lower depending on the plane.

Azarr
Old Feb 14, 2013, 09:58 AM
MOfroggy is offline
Find More Posts by MOfroggy
Registered User
Maidened my Crak Wing yesterday and I have to say it is VERY much fun to fly. I have 4 of the Nitroplanes POP's in various sizes and The Crak Wing is more fun to me than all of them.
This thing loops in a heartbeat, hovers and does reverse knife edges like some of my flat foamies. I am sure there are a lot more maneuvers yet to be learned by me. (Keep those videos coming!) Does anyone have a favorite maneuver with the CW they would like to share?
You won't be sorry you got one! (And the price is right!)
Joe
Old Feb 14, 2013, 11:51 AM
swampflyer is offline
Find More Posts by swampflyer
Registered User
right on.

i DO have a problem with my wing though...

i need more batteries.

Old Feb 14, 2013, 12:49 PM
jcansdale is offline
Find More Posts by jcansdale
Registered User
jcansdale's Avatar
Quote:
Originally Posted by MOfroggy View Post
This thing loops in a heartbeat, hovers and does reverse knife edges like some of my flat foamies.
What's a reverse knife edge?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Twisted Hobbys Crack Yak! hercdriver7777 3D Foamies 181 Sep 13, 2013 04:54 AM
Sold Twisted Hobbies Crack Yak - LPU Air Candy Aircraft - Electric - Airplanes (FS/W) 5 Jan 30, 2013 01:34 AM
Sold Twisted Hobby Crack Yak - RTF Roly72 Aircraft - Electric - Airplanes (FS/W) 10 Jan 22, 2013 01:18 PM
Sold Twisted Hobby Crack Yak Roly72 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Jan 21, 2013 08:01 PM