Thread Tools
Feb 03, 2013, 10:52 AM
Registered User
I ordered the Turnigy 1811 last week. 2000 kv.
Sign up now
to remove ads between posts
Feb 07, 2013, 02:22 PM
Registered User

70% Mini Old Fogey


Hi!

Here is my “Mini Old Fogey”. The idea was to build nice looking, small and simple model for flying outside on a calm day. So I decided to make ~70% version (670mm wing span) out of 3mm depron.

I use 1811 2000kV motor from HK, 7X3.5 prop, Turnigy Plush 6A ESC, 2s 460mAh Turnigy Nano Tech, OrangeRx R410 receiver and two 6g servos. AUW is 132g.

On a first flight I realized couple things. Firstly a small correction of thrust vector was necessary (I added some right-low direction). Secondly I dramatically reduced the angle of deflection on both rudder and elevator (relative to the angles I usually use on F3P style planes ), because the plane appeared pretty sensitive.

Hope this info will be helpful for comparison.
Feb 26, 2013, 12:19 PM
Registered User
I like those wheels, Did they and the wire come from HK?
Feb 27, 2013, 11:01 AM
Registered User
Quote:
Originally Posted by BenBusenitz View Post
... from HK?
The piano wire (D=1.2mm) is from local hobby store, and the wheels (25 mm outside dia) are from HK. They are extremely light.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Indoor flying - foamie & micro time slots? Nikolei Zinsli Scratchbuilt Indoor and Micro Models 7 Jan 14, 2013 09:52 PM
Discussion My Indoor and Micro wings for some club fun for indoor newbies Knife Liddle Scratchbuilt Indoor and Micro Models 2 Apr 02, 2012 12:37 AM
Discussion Indoor season is coming!!! Micro FULL CONTACT Indoor Combat! customminatures Combat 19 Jul 07, 2009 09:21 AM
Sold Losi Micro-T for trade for a coaxial micro indoor heli... Snooptalian Cars - Cars and Parts (FS/W) 1 May 26, 2007 12:44 PM