Flat finish for Monocote? - RC Groups
Thread Tools
Jan 30, 2013, 10:07 AM
Registered User

Flat finish for Monocote?

Has anyone found a good flat clear that can be sprayed on monocote/ultracote, etc?

I have tried a couple but they always blush really bad, giving a crappy result!

If you have found a product that works, what was your procedure for prepping the covering before painting?
Sign up now
to remove ads between posts
Feb 08, 2013, 11:55 PM
Leroy G.
Leroy G's Avatar
A good wipe down with 0000 steel wool and you may not need to put a flat coat on it, all it does is add weight.

Feb 09, 2013, 07:13 PM
Registered User
Interesting idea. Thanks.
Feb 13, 2013, 03:59 PM
What - Me Hurry?
redball8's Avatar
I've used the steel wool, and highly recommend it. Best done before covering; lay the film on a flat surface (I used a ping-pong table), and pour some non-flammable paint deglosser (ie, glycol based) on it to serve as a lubricant. Be careful of the direction of strokes you take with the steel wool, a cross-hatch will simulate fabric fairly well.
Feb 20, 2013, 06:03 PM
Registered User
R.M. Gellart's Avatar
I do not have the address, but John Redman from Horizon Hobbies did an upgrade finish of the 30cc P-47 and he did this very thing, it is all on Youtube.

Feb 20, 2013, 08:16 PM
Registered User
Harry H's Avatar
Here it is. http://www.horizonhobby.com/article/...underbolt-30cc

Feb 21, 2013, 12:46 PM
Registered User
Redman used the Top Flite Lustre Coat Flat Clear. Says it's the only one that's fuel proof.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery Crawler King at Rowher Flats peacekeeper94 Rock Crawlers 3 Jan 29, 2013 08:46 PM
Wanted Adjustable tow hook for flat bottom fuse ak79 Aircraft - Sailplanes (FS/W) 6 Jan 15, 2013 10:36 PM
Discussion Help me find this material - flat finish trim tape verticalflight Painting and Finishing Tips 2 Aug 04, 2009 10:36 AM
Discussion Help me find this material - flat finish trim tape verticalflight Composites Fabrication 0 Aug 03, 2009 09:19 PM
Discussion Flat finish for Spit...what should I use? millerhill Scale Sailplanes 2 Apr 14, 2008 10:56 AM