Thread Tools
Old Feb 02, 2013, 07:28 PM
valiantGLX is offline
Find More Posts by valiantGLX
Technomancer
valiantGLX's Avatar
Quote:
Originally Posted by miatamama View Post
I ordered another from HK with the 3amp esc, that is working as good as the 7a so far.

JCS
miatamama,

Just a bit of clarification please

So the 3a ESC works well with the AP05 5000kV on 1s?

What prop/s do you use?

Can it still sustain full throttle?

Thanks,
Valiant

PS - Micron radio control sells the motors a few pounds cheaper than Microaces. It says 17 GBP, but once its in the shopping basket it drops down to 14 GBP
RCG Plus Member
Last edited by valiantGLX; Feb 02, 2013 at 07:40 PM.
Sign up now
to remove ads between posts
Old Feb 02, 2013, 08:36 PM
miatamama is offline
Find More Posts by miatamama
miataman
miatamama's Avatar
valiant, I use the 5x3. They seem to be the sweetspot prop. I use them on my scratchbuilt champs to the beast and anything I build. I do have some 6x3's coming and will try them. I will post a pic of the 3amp I use. Have only had 2 friday indoors to try the new motors. Have run 15 batts thru them and have not had any cutouts on either motor. I am using the cheapest 300 nano batts so had to change the connectors.

JCS
Old Feb 02, 2013, 08:53 PM
valiantGLX is offline
Find More Posts by valiantGLX
Technomancer
valiantGLX's Avatar
Quote:
Originally Posted by miatamama View Post
valiant, I use the 5x3. They seem to be the sweetspot prop. I use them on my scratchbuilt champs to the beast and anything I build. I do have some 6x3's coming and will try them. I will post a pic of the 3amp I use. Have only had 2 friday indoors to try the new motors. Have run 15 batts thru them and have not had any cutouts on either motor. I am using the cheapest 300 nano batts so had to change the connectors.

JCS
Cool, I just ordered 1 more of those 3a ESCs (so I have 2 in total), 2 more AP05s (so I have 3 in total), and 2 300mah nanotechs

Im gonna run 2x Ap05s with the 2 3a escs and both 300mah lipos in my scratch built/designed P-38.

and

The other Ap05 and xp-7a will go on my 3D micro mustang.

RCG Plus Member
Old Feb 02, 2013, 10:19 PM
miatamama is offline
Find More Posts by miatamama
miataman
miatamama's Avatar
How do I attach a pic to a PM?

Speedy, This is the most important part. I cant attach to a PM

JCS
Old Feb 02, 2013, 10:57 PM
speedy01 is online now
Find More Posts by speedy01
Registered User
Quote:
Originally Posted by miatamama View Post
How do I attach a pic to a PM?
You can't, but better to post it here as was suggested.

How do I get the mount off the motor to get to the soldered wires? I removed the C lock washer, but then what? Everything still seems pretty well locked together. Sorry if I'm not using the correct terms.

Gene K
Old Feb 02, 2013, 11:06 PM
I R Irv is offline
Find More Posts by I R Irv
Registered User
I R Irv's Avatar
Miata what happened to 7, 8 ,and 9?
TODD
Old Feb 02, 2013, 11:09 PM
miatamama is offline
Find More Posts by miatamama
miataman
miatamama's Avatar
Gene, I think you would have to soak it in acetone and that might take the enamel off the wires. I did everything from the back with the mount on using a magnified visor while pulling the wires thru the mount Hard to do but if I can do it anyone can.
JCS
Old Feb 02, 2013, 11:12 PM
miatamama is offline
Find More Posts by miatamama
miataman
miatamama's Avatar
Irv Ignore them. You only have to work with 1-6. 7-8 and 9 just pass thru there arent any lead ends on them.
JCS
Old Feb 02, 2013, 11:28 PM
I R Irv is offline
Find More Posts by I R Irv
Registered User
I R Irv's Avatar
Quote:
Originally Posted by miatamama View Post
Irv Ignore them. You only have to work with 1-6. 7-8 and 9 just pass thru there arent any lead ends on them.
JCS
Gotch, I was cofused because when I wind a motor I wrap
1-4-7 2-5-8 3-6-9 with 7, 8 and 9 being the termination. Same thing but different.
TODD
Old Feb 03, 2013, 12:24 AM
Desert flier is offline
Find More Posts by Desert flier
Registered User
Desert flier's Avatar
would any of these outrunners on HK work in a Micro Mustang?
http://www.hobbyking.com/hobbyking/s...x_GPS_C03.html
\
Old Feb 03, 2013, 01:05 AM
speedy01 is online now
Find More Posts by speedy01
Registered User
Quote:
Originally Posted by miatamama View Post
I did everything from the back with the mount on ....
Worked like a charm - at least on the bench: AP05 motor, HK 030 ESC, R415 receiver, Hyperion 1S240mah battery, and DX6i transmitter.

Thanks again for the help!

Gene K
Last edited by speedy01; Feb 03, 2013 at 08:56 AM. Reason: Added Battery
Old Feb 03, 2013, 01:53 AM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Quote:
Originally Posted by Desert flier View Post
would any of these outrunners on HK work in a Micro Mustang?
http://www.hobbyking.com/hobbyking/s...x_GPS_C03.html
\
Might work but you'd do some foam carving as that's an outrunner and would need clearance to spin.
RCG Plus Member
Old Feb 03, 2013, 02:11 AM
speedy01 is online now
Find More Posts by speedy01
Registered User
Quote:
Originally Posted by Desert flier View Post
would any of these outrunners on HK work in a Micro Mustang?
That GPS C03 motor/gearbox was discussed and dismissed a couple of years ago in this interesting thread that started out exploring what could be done with a 10mm motor/gearbox. Conclusion (if I recall correctly) was that for the cost one could get a bettermotor/gearbox combination that had a much harder prop shaft.

Gene K
Old Feb 03, 2013, 03:22 AM
elvill is offline
Find More Posts by elvill
Registered User

Idk


still see couple possible uses for this combo 1S & DD 2s

1) 3blade 5045s dual pusher diff thrust wright flyer lite esc on 1s would be sick

2) smallish size dd props like estes cw/ccw gh wright flyer props - finally a motor that can push cw/ccw, 8.5mm DD gets hot. some 1s smaller on 2s

maybe not ULTIMATE but liter esc than brushed, liter than stock, single cell all doable if lite and used correctly bl is mucher cooler, last longer
Last edited by elvill; Feb 03, 2013 at 03:41 AM.
Old Feb 03, 2013, 11:20 AM
RCBABBEL is online now
Find More Posts by RCBABBEL
**I'm Battman**
RCBABBEL's Avatar
Quote:
Originally Posted by valiantGLX View Post
HH has no excuse! Disregarding BL there are better brushed motors to be had out there that out perform the current stock setup. Take the Bravo SX motor for example, it reportedly makes 25-30% more static thrust than the stock motor, and it even fits in the gearbox.
valGLX,

I've been selling Nine Eagles SP & SX 8.4mm brushed motors for a year or two now.
I always ask for feedback on motor performance.
https://www.rcgroups.com/forums/show...postcount=1242
I receive many PMs and get virtually no neg feedback.
Pretty incredible!


rc
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Eflite Celectra 1S 3.7 Lipo Charger AC UM Adpater for MCPX Winterdd Aircraft - Electric - Batteries & Chargers (FS/W) 0 Aug 24, 2011 08:56 PM
Sold Celectra 4-Port 1S UM charger $25 Shipped AggressorBLUE Aircraft - Electric - Batteries & Chargers (FS/W) 2 Jul 24, 2011 11:11 PM
Sold Five (5) 1S UM Lipos philipa_240sx Aircraft - Electric - Batteries & Chargers (FS/W) 1 Jan 20, 2011 11:10 AM
Discussion Taking the UM's brushless.... staying 1s darksiede Micro Ready-to-Fly 72 Sep 01, 2010 09:05 PM
Sold hyperion 25C 160mAh -1S-UM pttse Aircraft - Electric - Batteries & Chargers (FS/W) 0 May 10, 2010 02:21 AM