sudden death of Solo Pro - help!! - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 26, 2013, 04:31 PM
last of the sixties kids..
Cannafish's Avatar
Discussion

sudden death of Solo Pro - help!!


It just stopped and fell out of the sky. It appears dead as a dodo. What has happened? Any ideas would help cos I'm baffled. I was just flying around my front room when it just stopped and fell from the sky???
Sign up now
to remove ads between posts
Jan 26, 2013, 04:38 PM
Registered User
jimmy boo's Avatar
could be anything from chuck norris to the joker, you need to provide way more detail. Just use common sense, wind, acting funny beforehand, when it hit the ground were there obvious signs of breaks etc. ???

captain oblivious/obvious, you choose.
Jan 26, 2013, 04:47 PM
Different fly 4 different guy
gordonzo's Avatar
Quote:
Originally Posted by Cannafish
It just stopped and fell out of the sky. It appears dead as a dodo. What has happened? Any ideas would help cos I'm baffled. I was just flying around my front room when it just stopped and fell from the sky???
Any previous issues or symptoms noted?

When you plug in a different, fully charged battery does it turn on? Does one of the servos go to maximum travel and stay there?

More info would be helpful.

regards . . . g
Jan 26, 2013, 05:01 PM
last of the sixties kids..
Cannafish's Avatar
No indications at all. It just stopped. When I put a new charged battery in there is nothing. No servo movement no anything. I've crashed it a bit but not this morning. This was my 2 nd battery this morning. Just practising hovering and landing on things. Very weird
Jan 26, 2013, 05:03 PM
last of the sixties kids..
Cannafish's Avatar
I think I would notice a big bearded ginger dood karate kicking my chopper out of the sky. But you never know. :-)
Jan 26, 2013, 05:05 PM
last of the sixties kids..
Cannafish's Avatar
The red wire from the battery has come off the board
another dead heli for me - I can't solder things that small
Jan 26, 2013, 07:05 PM
Registered User
jimmy boo's Avatar
what, thats it? If your just ganna toss it, send it my way

hehe.

Anyways, best of luck, thanks for clearing it up.
Jan 26, 2013, 11:27 PM
Registered User
Red wire to board is very easy to solder. Any Heli flyer who avoids soldering will have bad time as most common problem. I went to those low dollar general merchadise stores and bought $1.50 soldering iron and solder .99 small unit. Works very well and like it better than my Black & Decker rig. Any electrical supply store has these. Also soldering stand with arms give you an easy fix, but your call. Good feeling when you fix your bird for pennies and it flys again.
Jan 27, 2013, 04:03 PM
last of the sixties kids..
Cannafish's Avatar
I'm going to have to learn to solder things I can't see.
dankar04 - there is nothing in NZ available for $1.50 - taking a piss costs you more than that. For example a V911 costs $100 here..
A big magnifying glass and a very small soldering iron is on my ever growing 'list' of things i 'need'.
Jan 29, 2013, 10:35 AM
Minister of the Obvious
Quote:
Originally Posted by Cannafish
I'm going to have to learn to solder things I can't see.
dankar04 - there is nothing in NZ available for $1.50 - taking a piss costs you more than that. For example a V911 costs $100 here..
A big magnifying glass and a very small soldering iron is on my ever growing 'list' of things i 'need'.
My eyes are what they once were either, but I have one of those cheap magnifying lamps. That and an optional set of helping hands (with its own magnifier) to hold critical items have helped me solder the small stuff -- and I am no expert by any means.

I'd also recommend some good tweezers to help you hold the small wires as you move them into place for soldering.

Buying the lamp ($25-$40 US), helping hands (<$10 at Harbor Freight), and a cheap Radio Shack 15W soldering iron (<$10US) pay for themselves in a hurry. If you have someone else do the work, the labor cost alone should pay for all of the above.

The PCB in my S107G crapped out and I paid $8 for a replacement board and did the work myself. A lot cheaper than $45 replacement copter at the LHS or even $25 shipped from Amazon.

Your mileage may vary, but then again I enjoy the tinkering.
Jan 29, 2013, 11:01 AM
An RC Yachtie.
Rajah235's Avatar
Hi Cannafish,
The "Helping Hand/s" are also available at your local electronics store.
Had a set for years to aid with my small/er projects.
eg; > http://dicksmith.com.au/dsau/search/...c8dc03673a1ef7

L..
Jan 29, 2013, 04:23 PM
last of the sixties kids..
Cannafish's Avatar
I now have a suitable soldering iron, helping hands, solder and tweezers
Jan 29, 2013, 09:02 PM
Minister of the Obvious
Quote:
Originally Posted by Cannafish
I now have a suitable soldering iron, helping hands, solder and tweezers
Go get 'em Cannafish! We're rootin' for ya!
Jan 30, 2013, 03:09 AM
last of the sixties kids..
Cannafish's Avatar
Quote:
Originally Posted by brandtb
Go get 'em Cannafish! We're rootin' for ya!


I wouldn't put any money on me though.

I think this thread needs to blend into this one..
http://https://www.rcgroups.com/foru....php?t=1811144


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion solo pro help Cannafish Beginner Training Area (Heli-Electric) 5 Jan 24, 2013 06:18 AM
Discussion Nine Eagles Solo Pro 100 settings PPKK Beginner Training Area (Heli-Electric) 0 Jan 13, 2013 01:07 PM
Sold solo pro v1, for sale Jsejalisco Aircraft - Electric - Helis (FS/W) 0 Jan 05, 2013 12:27 PM
Question NE Solo Pro V2: RX or TX failure? artvolk Micro Helis 0 Jan 02, 2013 03:26 PM
Discussion Axi 2217/20 sudden death..... help appreciated! Garbach Power Systems 8 Oct 22, 2009 08:43 PM