Thread Tools
Mar 20, 2018, 02:55 PM
Registered User
Capt. Roll's Avatar
I have a couple of ARF's for sale. Thought I would eventually get around to building them but it's probably not going to happen anytime soon. Especially since I've started to build my Sunfli 4 kit.

I purchased the KAOS new in box via Tower Hobbies; it has never been out of the box so everything should be present. $95

I did not purchase the Model Tech Thunderbolt directly from a retail vendor but it is new in box; I've not taken it out of the box to inventory parts but I'm assuming that everything is present. $100

Contact me via PM or email (rmisak@mail.com)

Rex
Sign up now
to remove ads between posts
Apr 18, 2018, 08:29 PM
Registered User
Capt. Roll's Avatar

DLE-111 v2


Sold the air frame this engine was powering.

Starts easy and runs smooth. Two modifications; Walbro WJ-71 carb and Bowman rings. Have a set of cans for the engine but no headers, only the stock mufflers. $525.00
Last edited by Capt. Roll; Apr 20, 2018 at 08:27 AM.
May 24, 2018, 01:06 PM
Registered User

Nobler For Sale


Nobler For Sale
Airplane is in good shape. I recovered it and replaced all the control surface hinges.
Airplane is ready to fly.
.45 2 stroke engine
Wing Span: 52”
Fuselage Length: 43”

Asking $75.00 for plane

Can Not Ship

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Last edited by Terry Thorpe; May 24, 2018 at 01:16 PM. Reason: correction
Jun 09, 2018, 10:08 AM
Registered User

Airplanes for sale


I have had no takers, so I will donate all four airframes to whom ever will use them. I need the space and will simply trash them if I have no takers by August 10th. I have new planes that I must make room for.

I have three SPA legal Pattern air frames that need your engine and radio and are flight ready.
First is a Curare-Bolt in and ready to fly
Second is an Killer Kaos 60 (Not the ARF)-Also bolt in and ready to fly
Last is a Phoenix 8-Needs motor mount then bolt in and ready to fly
I also have an Intruder not pictured because it blew off of a table at the field and broke the canopy and cowl.
I do have brand new items if you wish to replace. It would then be ready to bolt in and fly.

All are local pick up or I'll meet you at the field.

Jerry
817-793-0748
jerry.joyner@att.net[/email]
Last edited by joynerjj; Jul 21, 2018 at 09:28 AM.
Jun 10, 2018, 07:02 AM
Registered User

Sold


I have two radios that I do not use. I offer for sale a Futaba T7C with a R617RS receiver. Includes factory nicads and charger. This radio is a FASST radio and does not have a scratch on it.
The other radio is a Tactic TTX 650 six channel computer radio. It is a great first computer radio and is very easy to program and use. Again, there is not a scratch on this radio.
Both radios look and perform like brand new.
Asking $75 for the Futaba and $50 for the Tactic.
Jerry
817-793-0748
jerry.joyner@att.net
Last edited by joynerjj; Aug 04, 2018 at 05:51 PM.
Jun 10, 2018, 03:31 PM
Registered User

Art-Tech STOL electric aircraft


This is a near new Art-tech STOL, ready to go with the addition of your rx and 11,1 v 1800-2200 battery, drop bay, extra prop,
Prefer a local sale DFW area.
$115.00 may consider a trade???

Lots of you-tube video's detailing the unique features of this aircraft.
Specification
Length: 988mm/38.9in
Height: 412mm/16.2in
Weight: 1440g/50.8 oz
Wing span surface: 23.6dm2 Total wing span: 49.4"
Wing span load: 61g/dm2

Configuration :
RC system: EFLY-BII 6CH 2.4GHz
Brushless motor: ST3511-760KV
Li-Po battery: 11.1V,1800mAh
ESC:30A Brushless
Servo: 9gx7
Jun 13, 2018, 03:33 PM
Registered User

Futaba Used Servos for Sale


Futaba Used Servos for Sale
These servos are in good condition and I operationally checked each servo.

There are 14 servos:
8 each Futaba S3003
3 each Futaba S3004
3 each Futaba FP-S14B Direct Drive

Tower Hobbies New Prices:
8 each Futaba S3003----- $87.92 ($10.99 each)
3 each Futaba S3004----- $41.97 ($13.99 each)
3 each Futaba FP-S14B-- $41.97 ($13.99 each)
All 14 servos $171.86
My Prices:
8 each Futaba S3003 ----- $40.00 ($5.00 each)
3 each Futaba S3004----- $21.00 ($7.00 each)
3 each Futaba FP-S14B-- $21.00 ($7.00 each)
All 14 servos $82.00 OBO

I only accept cash or money order

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 13, 2018, 04:00 PM
Registered User

3 each Futaba FASST Compatible OrangeRX 8CH 2.4GHz


OrangeRX 8CH 2.4GHz ----3 each Futaba FASST Compatible
These are 8 channel receivers.
2 RSx are GR800HV
1 RX is not marked

My Price: 20.00 each or 50.00 for all 3 receivers

Will Ship to lower 48 states
Buyer pays for shipping

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 13, 2018, 04:06 PM
Registered User

3 Each Futaba Rx R617FS (FASST) Receivers for Sale


Futaba Rx R617FS (FASST) Receivers for Sale 3 Each
These are 7 channel receivers.

Tower Hobbies Price: 79.99 for 1 receiver

My Price: 40.00 each or 100.00 for all 3 receivers

Will Ship to lower 48 states
Buyer pays for shipping

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 13, 2018, 04:14 PM
Registered User

Futaba Rx R616FFM (FASST) Receiver for Sale


Futaba Rx R616FFM (FASST) Receiver for Sale
This is a 6 channel receivers.
This is a miniature Rx with miniature servo connections.
The power connection is a standard Rx battery connector.

EBAY Price: $49.00 plus

My Price: $25.00

Will Ship to lower 48 states
Buyer pays for shipping

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 14, 2018, 09:34 AM
Registered User
K&S Wire Bender & Coiler for Sale
Bend aluminum, brass, stainless steel and music wire from 1/8 to dia. And some rectangular and square shapes.
In the coiler mode sizes to use range from 1/8 to 3/16 dia. (Landing Gear Spring Coil for Shock Absorption)
Please see pictures. I also have a tube full of various sizes of piano wire.
This is a very solid device for bending piano wire.

My Price: 30.00
Will ship to lower 48
Buyer pays for shipping
I will pay for packaging

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jul 21, 2018, 02:18 PM
Nose down, you're gonna stall
rowdyjoe's Avatar
I have a Turnigy TGY-i10 telemetry receiver that I can't use. It's FREE for the asking. It was in a working airplane when removed. Message me via RCG or email.

No Shipping.

https://hobbyking.com/en_us/turnigy-...-receiver.html

Garry
Jul 21, 2018, 02:26 PM
Fort Worth Thunderbirds
Sunbyrd's Avatar
Gary, I'd be happy to take it off your hands as I have two Turnigy transmitters. John
Jul 21, 2018, 02:35 PM
Nose down, you're gonna stall
rowdyjoe's Avatar
Quote:
Originally Posted by Sunbyrd
Gary, I'd be happy to take it off your hands as I have two Turnigy transmitters. John
Great John. Are you going to the meeting MONDAY? If so, I'll meet you there and give it to you.

Sorry, got my days confused. That sometimes happens to us retirees.
Last edited by rowdyjoe; Jul 21, 2018 at 03:28 PM.
Jul 22, 2018, 06:09 AM
Fort Worth Thunderbirds
Sunbyrd's Avatar
Yes, I'll be there. See ya then. BTW, I've got this huge Lazy Bee I'm giving away. Can you use that?

Or anyone else...

Clancy Big LazyBee (airframe only) for free. Aprox 60" wing span. Once upon a time set up to fly with OS FP40 but can be converted to electric power easily. Small tear in wing...have some matching blue UltraCote for repair.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion For Sale/ Trade/ Wanted at the South Eastern FPV Event HansAuf 6th Annual South Eastern FPV Event 9 Jun 06, 2016 05:52 PM
Discussion For Sale/ Trade/ Wanted @ SEFF Vapor Trails SEFF 2016 94 Apr 16, 2016 11:56 AM
Discussion For sale/wanted techspy Weak Signals Show 2016 55 Apr 03, 2016 05:26 PM
Discussion My Swyft if for sale in the For Sale/Wanted area Tim K Hand Launch 1 Dec 07, 2008 07:46 PM