Thread Tools
Oct 25, 2017, 07:03 PM
Registered User

For Sale Models, Engines, older Radios


Clyde Henley has several models for sale in the Fort Worth Area, In addition to model aircraft he also has 2 and 4 stroke nitro engines and some older 72 Mhz radios. Please contact him at 817 249 2760 for pricing and details

Thanks

FW Thunderbirds President
James A Meadows
Sign up now
to remove ads between posts
Oct 25, 2017, 07:14 PM
Nose down, you're gonna stall
rowdyjoe's Avatar
Quote:
Originally Posted by jammer52
Clyde Henley has several models for sale in the Fort Worth Area, In addition to model aircraft he also has 2 and 4 stroke nitro engines and some older 72 Mhz radios. Please contact him at 817 249 2760 for pricing and details

Thanks

FW Thunderbirds President
James A Meadows
----------------------------------------------------------------------------------------------------------------------------------------------------------

Thanks James. I'll give him a call.

Garry
Dec 29, 2017, 07:47 PM
Gary James
gsjames's Avatar

Wanted: Laser cutting work


Does anyone in the club have a laser cutter or access to one? I need 4 small lite-ply parts to complete a short kit that I picked up at a swap meet. I have CAD files of the 4 needed parts
Dec 29, 2017, 09:13 PM
Registered User
Benbrook library has one you can use for free. Vinyl cutter and 3d printer too.
Feb 03, 2018, 01:45 AM
Registered User

Pilot Models Dolphin Turbine with KingTech k140


M y good friend Gus Hudson from Sulpher Springs TX asked me to see if I can help him sell this brand new never been flown or even started turbine airplane.

Airplane is Pilot Models Dolphin with the Standard wing (86"wing span). Red white and silver color scheme. Comes with all servos, landing gear (air actuated) wheels and air actuated wheel brakes. Brand new never been started KingTech K-140G. The G series engine is Kero start state of the art turbojet engine with approx 32-33 lbs thrust. Will run on jet a or kerosene or diesel from your local gas station. This is an all wood airframe, covered with iron on film. Light weight for its size. A big airplane but not so big as to be difficult to transport or assemble. Lots of wing for reasonably slow landings. Our field is more than big enough.

Includes all servos . all you need to make it airworthy is a TX, RX and batteries.

Pictures and descriptions of this great beginner to advanced or intermediate jet can be found at www.chiefaircraft.com

I have flown one of these several times (owned and flown at T-bird field by Don Top). They fly very well with no bad habits. Not a missle but will be fast enough with this engine and will have very good vertical performance. I would be happy to assist a buyer for the initial flights as needed.

Owner has approx $ 5500-$6000 invested. The engine alone sells new for $ 2300 or $ 2400.

Gus is asking $ 3600 or $ 3700 with receiver or make an offer. Buy it today and fly it tomorrow. What a great way to get into turbine flying.

I will glad to answer any questions as best I can or put you in touch with Gus.

Thanks

Brian Gates
817-874-3734 cell
817-465-6656 home

tenissace1@tx.rr.com

PS Kindly spread the word, lets see if we cant find this jet a home,
Last edited by turnnburn2; Feb 03, 2018 at 01:55 AM.
Feb 20, 2018, 08:40 AM
Hey ya'll watch this
Stealdesk's Avatar
Quote:
Originally Posted by turnnburn2
M y good friend Gus Hudson from Sulpher Springs TX asked me to see if I can help him sell this brand new never been flown or even started turbine airplane.

Airplane is Pilot Models Dolphin with the Standard wing (86"wing span). Red white and silver color scheme. Comes with all servos, landing gear (air actuated) wheels and air actuated wheel brakes. Brand new never been started KingTech K-140G. The G series engine is Kero start state of the art turbojet engine with approx 32-33 lbs thrust. Will run on jet a or kerosene or diesel from your local gas station. This is an all wood airframe, covered with iron on film. Light weight for its size. A big airplane but not so big as to be difficult to transport or assemble. Lots of wing for reasonably slow landings. Our field is more than big enough.

Includes all servos . all you need to make it airworthy is a TX, RX and batteries.

Pictures and descriptions of this great beginner to advanced or intermediate jet can be found at www.chiefaircraft.com

I have flown one of these several times (owned and flown at T-bird field by Don Top). They fly very well with no bad habits. Not a missle but will be fast enough with this engine and will have very good vertical performance. I would be happy to assist a buyer for the initial flights as needed.

Owner has approx $ 5500-$6000 invested. The engine alone sells new for $ 2300 or $ 2400.

Gus is asking $ 3600 or $ 3700 with receiver or make an offer. Buy it today and fly it tomorrow. What a great way to get into turbine flying.

I will glad to answer any questions as best I can or put you in touch with Gus.

Thanks

Brian Gates
817-874-3734 cell
817-465-6656 home

tenissace1@tx.rr.com

PS Kindly spread the word, lets see if we cant find this jet a home,
Email sent for more info and pic
Thanks
Mar 20, 2018, 02:55 PM
Registered User
Capt. Roll's Avatar
I have a couple of ARF's for sale. Thought I would eventually get around to building them but it's probably not going to happen anytime soon. Especially since I've started to build my Sunfli 4 kit.

I purchased the KAOS new in box via Tower Hobbies; it has never been out of the box so everything should be present. $95

I did not purchase the Model Tech Thunderbolt directly from a retail vendor but it is new in box; I've not taken it out of the box to inventory parts but I'm assuming that everything is present. $100

Contact me via PM or email (rmisak@mail.com)

Rex
Apr 18, 2018, 08:29 PM
Registered User
Capt. Roll's Avatar

DLE-111 v2


Sold the air frame this engine was powering.

Starts easy and runs smooth. Two modifications; Walbro WJ-71 carb and Bowman rings. Have a set of cans for the engine but no headers, only the stock mufflers. $525.00
Last edited by Capt. Roll; Apr 20, 2018 at 08:27 AM.
May 24, 2018, 01:06 PM
Registered User

Nobler For Sale


Nobler For Sale
Airplane is in good shape. I recovered it and replaced all the control surface hinges.
Airplane is ready to fly.
.45 2 stroke engine
Wing Span: 52”
Fuselage Length: 43”

Asking $75.00 for plane

Can Not Ship

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Last edited by Terry Thorpe; May 24, 2018 at 01:16 PM. Reason: correction
Jun 09, 2018, 10:08 AM
Registered User

Airplanes for sale


I have had no takers, so I will donate all four airframes to whom ever will use them. I need the space and will simply trash them if I have no takers by August 10th. I have new planes that I must make room for.

I have three SPA legal Pattern air frames that need your engine and radio and are flight ready.
First is a Curare-Bolt in and ready to fly
Second is an Killer Kaos 60 (Not the ARF)-Also bolt in and ready to fly
Last is a Phoenix 8-Needs motor mount then bolt in and ready to fly
I also have an Intruder not pictured because it blew off of a table at the field and broke the canopy and cowl.
I do have brand new items if you wish to replace. It would then be ready to bolt in and fly.

All are local pick up or I'll meet you at the field.

Jerry
817-793-0748
jerry.joyner@att.net[/email]
Last edited by joynerjj; Jul 21, 2018 at 09:28 AM.
Jun 10, 2018, 07:02 AM
Registered User

Sold


I have two radios that I do not use. I offer for sale a Futaba T7C with a R617RS receiver. Includes factory nicads and charger. This radio is a FASST radio and does not have a scratch on it.
The other radio is a Tactic TTX 650 six channel computer radio. It is a great first computer radio and is very easy to program and use. Again, there is not a scratch on this radio.
Both radios look and perform like brand new.
Asking $75 for the Futaba and $50 for the Tactic.
Jerry
817-793-0748
jerry.joyner@att.net
Last edited by joynerjj; Aug 04, 2018 at 05:51 PM.
Jun 10, 2018, 03:31 PM
Registered User

Art-Tech STOL electric aircraft


Sold
Last edited by jammer52; Sep 30, 2018 at 03:50 PM. Reason: SOLD
Jun 13, 2018, 03:33 PM
Registered User

Futaba Used Servos for Sale


Futaba Used Servos for Sale
These servos are in good condition and I operationally checked each servo.

There are 14 servos:
8 each Futaba S3003
3 each Futaba S3004
3 each Futaba FP-S14B Direct Drive

Tower Hobbies New Prices:
8 each Futaba S3003----- $87.92 ($10.99 each)
3 each Futaba S3004----- $41.97 ($13.99 each)
3 each Futaba FP-S14B-- $41.97 ($13.99 each)
All 14 servos $171.86
My Prices:
8 each Futaba S3003 ----- $40.00 ($5.00 each)
3 each Futaba S3004----- $21.00 ($7.00 each)
3 each Futaba FP-S14B-- $21.00 ($7.00 each)
All 14 servos $82.00 OBO

I only accept cash or money order

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 13, 2018, 04:00 PM
Registered User

3 each Futaba FASST Compatible OrangeRX 8CH 2.4GHz


OrangeRX 8CH 2.4GHz ----3 each Futaba FASST Compatible
These are 8 channel receivers.
2 RSx are GR800HV
1 RX is not marked

My Price: 20.00 each or 50.00 for all 3 receivers

Will Ship to lower 48 states
Buyer pays for shipping

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661
Jun 13, 2018, 04:06 PM
Registered User

3 Each Futaba Rx R617FS (FASST) Receivers for Sale


Futaba Rx R617FS (FASST) Receivers for Sale 3 Each
These are 7 channel receivers.

Tower Hobbies Price: 79.99 for 1 receiver

My Price: 40.00 each or 100.00 for all 3 receivers

Will Ship to lower 48 states
Buyer pays for shipping

Terry Thorpe
413 Schooner Dr
Azle, TX 76020
817-876-2661


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion For Sale/ Trade/ Wanted at the South Eastern FPV Event HansAuf 6th Annual South Eastern FPV Event 9 Jun 06, 2016 05:52 PM
Discussion For Sale/ Trade/ Wanted @ SEFF Vapor Trails SEFF 2016 94 Apr 16, 2016 11:56 AM
Discussion For sale/wanted techspy Weak Signals Show 2016 55 Apr 03, 2016 05:26 PM
Discussion My Swyft if for sale in the For Sale/Wanted area Tim K Hand Launch 1 Dec 07, 2008 08:46 PM