OSD video bouncing. Why? Please help. - RC Groups
Thread Tools
Jan 26, 2013, 12:08 PM
Long Range Flyer
kolabuzlu's Avatar

OSD video bouncing. Why? Please help.

Video coming from OSD starts to flicker/bounce just after Eagle Tree Systems boot.
Why does this happen?
Please help.
See the video below.
Best Regards.

Eagle Tree OSD Problem (0 min 16 sec)
Last edited by kolabuzlu; Jan 26, 2013 at 12:26 PM.
Sign up now
to remove ads between posts
Jan 26, 2013, 06:10 PM
billpa's Avatar
Hi, there are a couple of things that can cause that.

Could you please try the following:
1) try turning off telemetry. That is on the "Eagle Eyes" on-screen setup menu in the OSD, which can either be accessed via the radio sticks or the PC software.
2) Try turning down the white level, and/or increasing the black level. Those settings are in the "Display Settings" menu.

Let me know whether one of these resolves it, and we'll figure out next steps.
Feb 18, 2013, 06:48 PM
Assault the sky
secretspy711's Avatar
Does your video in or out port have the ground pin connected? Something similar happened to me when I disconnected the black wire. Doesn't look exactly like yours though, only the text was bouncing, not the entire video.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Complete starter Fpv system. Plane/Osd/Goggles/Video/Spektrum Johnnymeg FPV Equipment (FS/W) 8 Mar 12, 2013 12:24 AM
For Sale Range Video OSD gen 5 jebzdzidy FPV Equipment (FS/W) 1 Feb 19, 2013 05:18 PM
Help! Bouncing Text on OSD KentF Eagle Tree Systems 3 Nov 20, 2012 10:21 PM
Help! Video will not transmit pleas help tonywayne FPV Talk 7 May 19, 2011 03:00 AM
Discussion Gaui EP100 bounces a bit? Video included. Can anyone help please? turnbui Micro Helis 7 Aug 26, 2008 01:30 PM