New scratch build. - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 25, 2013, 06:12 PM
Registered User
jimmy boo's Avatar

New scratch build.

hey guys hopefully you can all check out my recent thread on the plane, but I need to get all the electronics for it. It weighs about 350 grams with the nose weight (95g). wingspan 30inches. which is needs to have aa good CG, of course with electronics, the weight could go down. I have a transmitter from the FMS easy trainer 800 and could sue that as the transmitter, I may be able to use the reciever if its easy to take off. idk. Anyways heres the plane. need all the electronics/battery etc. help i can get.

it is a full three channel plane with some cool features.
#1 self leveling, dihedral wings make sure that it will never fall onto it's side.
#2 with such a big rudder, it will always turn to face the wind without control
#3 hand free gliding/self correction, will not stall unless extreme loss of speed, even then it will self correct.
#3 3 channels elevator, rudder, throttle.

BTW the plane and plane are 100% self made, although a lot of help came from the forums.

P.S. the plane is intended to be a motored glider.

the video you saw was just a hand launch with no controls, I had no way to steer it and all movement was on its own,

thanks to all.
Last edited by jimmy boo; Apr 08, 2016 at 06:29 PM.
Sign up now
to remove ads between posts
Jan 27, 2013, 07:04 PM
Registered User
jimmy boo's Avatar
Thread being closed, all other comments, which are welcome, please post here:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Seeking suggestions for next scratch build dglo Scale Kit/Scratch Built 29 Oct 29, 2013 09:12 PM
Question First Scratch Build Questions elmtree Scratchbuilt Multirotor Drones 9 Jan 23, 2013 11:00 PM
Discussion Ugly 1 Scratch Build asusrick Fuel Plane Talk 3 Jan 19, 2013 04:44 PM
Discussion Ugly 1 Scratch Build asusrick Balsa Builders 0 Jan 19, 2013 03:53 PM