Guardian 2d/3d issue - RC Groups
Thread Tools
Jan 23, 2013, 12:29 PM
Registered User

Guardian 2d/3d issue

When in the 2d mode the aircraft flies 10 to 15 degrees right wing low. When in 3d or off mode the aircraft flies straight and level. When using the computer to set up the Guardian the AH show the right wing low in 2d and straight and level when in 3d or off mode.

I have leveled the aircraft and reset the level and flight trims several times. I have updated the firmware. I have reset the Guardian back fo factory spec and reset the setup specs. I have comfirmed that the Guardian is installed correctly. What more can I do to resolve this problem?


Sign up now
to remove ads between posts
Jan 26, 2013, 04:21 PM
billpa's Avatar
Hi Jim, I am not sure what could be causing that issue. could you open a web ticket with us at, and we'll get it sorted for you.
Jan 27, 2013, 01:18 PM
Registered User
Originally Posted by stroudj
When using the computer to set up the Guardian the AH show the right wing low in 2d and straight and level when in 3d or off mode.
With the plane sitting level (or the attitude you want), and your PC connected, when you click "Reset Level Pitch/Roll" will the AH "level"? I know I've had to click "Reset level Pitch/Roll" several times to level the AH. AH would get closer to level with each click, 'til it was level.
Apr 29, 2013, 07:33 AM
Registered User
I have the same problem, any fixes?
Apr 30, 2013, 12:46 PM
Registered User
My Guardian will change the pitch trim with a change of gain.
I opened a ticket and all I got back was a rehash of the manual.
Apr 30, 2013, 01:19 PM
Registered User
I kind of got the feeling when I asked a question at the guardian webpage contact that there was no one home. I dont have a clue what is giving yours hiccups but you should make sure that you dont have any mixes running and your throws are high in the radio, settings 50% or more at the minimum. Guardian expects to see full throws. I've been over at the big thread hashing my problems out and am ready to go back out with mine if the wind ever lets up. Choo choo 22 over there seems to be helpful. I haven't had a single calm day since getting this ready to fly and at the first opportunity will try that on mine to see if it happens for me too.
Good luck, you gotta love what fun the guardian brings to an idiot like me actually doing 3D moves, it's unbelievable!
Apr 30, 2013, 01:25 PM
billpa's Avatar
t.edwards, the AHI on the PC will always show level when in 3D or OFF mode. When in 2D mode, if you relevel, does the AHI stay in the correct (level) orientation?

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Announcing the Guardian 2D/3D Stabilizer billpa Eagle Tree Systems 14233 Nov 15, 2017 05:56 PM
Discussion The Guardian 2D/3D Stabilizer and elevon planes AJay Scratch Radios 1 Apr 17, 2014 10:42 PM
Wanted EagleTree Guardian 2D/3D Inertial Flight Stabilizer guyst Aircraft - General - Radio Equipment (FS/W) 0 Jan 13, 2013 04:27 PM
Sold Eagletree Guardian 2D/3D Stabilizer Dan777 Aircraft - General - Radio Equipment (FS/W) 2 Jan 05, 2013 04:04 PM
Discussion Guardian 2d/3d problem dgavalis Eagle Tree Systems 1 Jul 06, 2012 09:37 PM