What characteristics minimize the wind's effect? - RC Groups
Jan 22, 2013, 07:41 PM
Registered User
Discussion

What characteristics minimize the wind's effect?

I realize that all planes are effected by wind. But what are defining characteristics when it comes to wind resilience.

I guess I should start by defining wind resilience.

The plane is not easily diverted from its line of travel by changing wind conditions. Eg. The plane resists changes in yaw, pitch, and roll caused by wind.

Lets start with basic Newtonian physics. The plane is being accelerated in a direction because it has a force applied to it by the wind.

F=MA
Since what we care about here is A lets rearrange.
A=F/M

So it looks like I have a few options here. I can increase the Mass. Thus if the wind provides the same force, the acceleration is diminished. But this isn't very good because yes it makes it harder for the wind to push me around, but it also makes it harder for my control surfaces to push me around.

So this leads me to our other term... Force. If I can decrease the force I can decrease the acceleration. The only way I know to decrease the force is by changing the planes shape. Hence the question. What characteristics of a plane (preferably shape here) make it more or less resistant to wind?
 Jan 22, 2013, 08:18 PM Registered User A higher wing loading (increased weight carried by the area of the wing) will lessen the effect of the winds. Imagine an indoor plane, flown outdoors on a calm evening, and then the same plane in 12-15 mph with gusts approaching 20mph. Other planes with higher wing loadings than the indoor planes can be controlled and flown while the indoor planes are all but uncontrollable as they get blown around. You might think raw power is a solution, but to illustrate... imagine having triple the normal amount of power on the indoor plane flown in gusts and winds... it's still going to be tossed and blown about.
 Jan 22, 2013, 08:45 PM Registered User I don't agree that it's the higher wing loading necessarily. I think it's more to do with speed. And since planes with higher wing loading have to go faster, there's an "apparent" correlation. A plane with a wide speed envelope has an advantage in the wind. Wing loading on a Formosa is fairly low (8-10 oz./sq. ft.), but it's my go-to plane on windy days. I think the OP is onto something when he talks about the plane's shape. The Formosa is a particularly sleek airplane, a classic pattern airplan. I think that has a lot to do with its wind handling. I have plenty of other planes with lower wing loading than the Formosa, but they're all draggy -- none of these have a top speed near what the Formosa can do. So they're not as good in wind.
Jan 22, 2013, 09:03 PM
characters welcome!
Quote:
 Originally Posted by rafe_b I don't agree that it's the higher wing loading necessarily. I think it's more to do with speed.
Higher wingloadings require more speed to remain in flight. Weight has very much to do with it.

mw
Jan 22, 2013, 09:09 PM
Registered User
Quote:
 Originally Posted by rafe_b I don't agree that it's the higher wing loading necessarily. I think it's more to do with speed. And since planes with higher wing loading have to go faster, there's an "apparent" correlation. A plane with a wide speed envelope has an advantage in the wind. Wing loading on a Formosa is fairly low (8-10 oz./sq. ft.), but it's my go-to plane on windy days. I think the OP is onto something when he talks about the plane's shape. The Formosa is a particularly sleek airplane, a classic pattern airplan. I think that has a lot to do with its wind handling. I have plenty of other planes with lower wing loading than the Formosa, but they're all draggy -- none of these have a top speed near what the Formosa can do. So they're not as good in wind.
Think of it this way... throw a clay brick in a 40 mph wind and then throw a styrofoam brick and see which one is affected by wind.
Speed is NOT the determining factor.
 Jan 22, 2013, 09:17 PM Ascended Master Slopers add weight to fly (faster) in higher winds. It takes wing loading to penetrate a nice stiff wind.
Jan 22, 2013, 09:17 PM
Registered User
I live in a windy area, 12-14 normal with gusts to 25 on some days.
After building over 100 planes to fly in the wind, I have found that because the wind here is gusty and will sometimes sheer quite a bit, that;

Symmetrical airfoils are best, and undercambered are the worst.
Swept wings add a dihederal effect, but dihederal and polyhederal wings allow the wind to get under them and tip them.
Of course, extra power is always a friend.
Tractor(puller) prop is more stable than a pusher.
Larger control surfaces deflected less than smaller ones deflected more, disturb the air less.
Then the less profile the fuselage has the better. That's why Flying Wings do well.
Mid or high wings are usually always more stable.
And EPP foam helps with the unexpected gusts and sheer.

Putting all this together I built a 23" EPP tractor for windy days.
Flying weight it about 3ozs, Yes, just 3ozs!
It handles 15mph winds real well and doesn't get blown away, except after its landed.
It could handle more wind, but the 10g outrunner pulls it to about 15-16mph and then it needs more power.

Images

Jan 22, 2013, 10:41 PM
Registered User
Quote:
 Originally Posted by DustBen Think of it this way... throw a clay brick in a 40 mph wind and then throw a styrofoam brick and see which one is affected by wind. Speed is NOT the determining factor.
But a brick is a draggy shape, and neither of these objects has thrust to produce airspeed.

I say, speed is the determining factor. As airspeed increases, the relative effect of wind decreases. We know that there are very light planes that do very well in wind. But they need to be sleek. A sleek plane can have very low wing loading yet still go fast.

I used to hear this all the time from the old men at the club (the first club I was part of...) You need heavy planes to fly in wind, they'd say. I'm not buying it. In 15+ mph wind, I'd rather fly my 'Mosa than one of their club trainers, at twice the wing loading.
 Jan 22, 2013, 11:47 PM Registered User i think it is both speed and weight . i have a big super sky surfer and i have a diamond 2500. sky surfer is bigger and heavier but the diamond has both weight and speed and fly's way better in wind. heck maybe its the wing design not sure .
 Jan 23, 2013, 08:35 AM An itch?. Scratch build. This sort of question crops up regular, with varying view points. My view point ?, how often do you see a bird carrying a house brick so that it can fly on a windy day ?. You need enough power to overcome a head wind. Plenty of people say they fly their micro models and lightweights on windy days. Now severe turbulence/gusting is a bit of a different game. I would say then a sleek streamlined model would fly better, than a draggy biplane.
Jan 23, 2013, 08:52 AM
Registered User
Quote:
 Originally Posted by eflightray My view point ?, how often do you see a bird carrying a house brick so that it can fly on a windy day ?
Or an African swallow with a coconut?

I'm sure some saw this coming.
 Jan 23, 2013, 09:45 AM Electric Coolhunter I vote for wing loading and something not mentioned so far (at least when I was originally typing this post)....airframe cleanness, Speed is less of a factor, And I agree that excess positive stability is not always a good thing for wind handling. The fact that it is not speed alone is easily proven by flying a lightly loaded model in turbulent wind at the same speed as a model with more wing loading. Done it many times. When full scale aircraft are designed for low level attack, the best ones invariably have high wing loadings. At 450 knots, something like the Jaguar or F-111 has a MUCH smoother ride in low level wind turbulence than an aircraft with less wing loading like a B-52 or Canberra pressed into the same job at similar speeds. Airframe cleanliness comes into play when the model is flying in gusty wind conditions. A clean model like a Speed 400 pylon racer or a slope racer or a warbird fighter with retracts that has less junk hanging off of it is less affected by a transient wind gust than a model like a J-3 or a Stearman biplane with wing struts, landing gear fairings, wheels, large windshield fairings and such that catch the transient wind gusts, from any angle. Last edited by Thomas B; Jan 23, 2013 at 09:50 AM.
Jan 23, 2013, 04:48 PM
Senile Member
Quote:
 Originally Posted by Rockin Robbins Turbulence (not wind, which does not affect a flying plane at all). Here there are two factors involved. Turbulence, which can be expressed as plus or minus the prevailing wind, has an amplitude of highest minus the lowest wind. The ratio between that variability amplitude and the prevailing wind speed means everything. Suppose you have a 10 mph wind with 5 mph variability. That means the wind speed is going up or down 50% in speed! Now take a 60 mph wind with 5 mph variability. That's a an 8.3% variability.
Have you read what you wrote? If, as you said, wind does not affect a flying plane at all, then the fact that the plane is flying in a 10 mph wind or a 60 mph wind is irrelevant. The only relevant factor is that there is a 5 mph variation. As such, that 5 mph variation will exert the same force on the airplane, and the airplane will react in the same manner and to the same degree to that gust when flying in a 60 mph wind as it would when flying in a 10 mph wind. The ratio between the variability amplitude and the prevailing wind speed means nothing because, as you said, the prevailing wind speed means nothing.

Quote:
 Originally Posted by Rockin Robbins Wing loading: This is related to speed. A higher wing loaded plane flies faster than a lower wing loading plane, in general. There are exceptions.
Wing loading is a factor, if not the main factor, but it has nothing to do with speed. It is all about surface area of the wing, which determines the amount of force a gust of a given velocity has on the wing, verses mass (A=F/M). A higher wing loaded plane does not fly faster than a lower wing loaded plane, it simply has a higher stall speed.

Quote:
 Originally Posted by Rockin Robbins Flight Speed: The higher percentage the wind variability in mph is to the speed of the plane, the more affected the plane is by it. We can illustrate using wind instead of variability. A plane flying 10 mph in a 10 mph crosswind must crab at a 45% angle to maintain course over ground. However a plane flying at 50 mph only needs a crab angle of 11.3º to maintain that same course. Wind gusts would affect the two planes to the same ratio.
Are you really serious? An airplane has no idea what the wind is (as you have already noted above) and it has no idea what its ground track is. So how can it react differently to gusts of equal amount based upon wind or ground track?

Larry