Thread Tools
This thread is privately moderated by DJO, who may elect to delete unwanted replies.
Old Jan 22, 2013, 06:16 PM
DJO is offline
DJO
Find More Posts by DJO
Trader Rating: 106
DJO
"Yo, that's a thermal"
DJO's Avatar
Sold

3DHS 41'' Edge LPU - RX Ready! $150


Yo Everybody,

Up for sale is my 3D Hobby Shop 41'' Edge - in the orange color scheme. I built this plane a while ago but never really enjoyed flying it too much, IDK... but then I put in this new setup and it's a lot more fun however, now I'm looking to fund something else, maybe something larger but I'm not sure. Either way, I need to get this sold!

Setup:

3DHS 41'' Edge (Orange)
Turnigy Park 480 Motor 1020kv
FLiPower 40A ESC w/BEC
Turnigy MG Servos x 3
Parkzone SV80 x 1
1800 mAH 3S 25C Zippy Compact
Genuine Deans Connectors
11x5.5 and 12x6 Props Included

It's not in PERFECT condition, but it's not in BAD condition either. A few wrinkles on the side, easily fixed with a heat gun or whatever if you'd like, but it flies fine with them anyways, as well as a couple of nicks and such on the bottom of the fuselage. The cowl has a couple of quarters in it (like 2 or 3) to balance this plane out perfectly. The balsa piece that goes across the fuselage broke off, and the magnets are gone also, but they aren't needed because there's a little latch like thing that the canopy goes into. I've had no issues with it yet. Oh yeah and the wheel pants and such are also gone, they got beat up from grass landings. I put some tape over the chrome type landing gear so that the black matches the plane's scheme The motor box and some parts of the fuselage were recently repaired but nothing extensive or major.

Flies fine. It's not like a hardcore, 3D machine but it can do the loops and rolls that you need it to. I mainly flew it for sport flying.

You can see it flying here:
3DHS 41'' Edge Flights - Cruising Around (2 min 44 sec)


$150 LPU. I originally paid:

Airframe $130
Motor $30
ESC $25
Servos $13
Battery $12

Total $210. Save $60, not to mention shipping costs! Great first balsa plane.

I WILL NOT SHIP THIS.

LPU in CT, PM me for more details.

All you'll need is an RX!



Dan
Last edited by DJO; Jan 22, 2013 at 06:23 PM.
Sign up now
to remove ads between posts
Old Jan 22, 2013, 09:36 PM
bigstatik is offline
Find More Posts by bigstatik
Trader Rating: 21
T-28 abuser
bigstatik's Avatar
Where is local pickup?
Old Jan 22, 2013, 09:36 PM
DJO is offline
DJO
Find More Posts by DJO
Trader Rating: 106
DJO
"Yo, that's a thermal"
DJO's Avatar
Says it right in the description...
Old Jan 23, 2013, 02:16 AM
mx_ata2d is offline
Find More Posts by mx_ata2d
Trader Rating: 86
Addiction Defined
mx_ata2d's Avatar
says "see it fly here" its out in the south 40, anybody see it flying?
Old Jan 23, 2013, 01:53 PM
bigstatik is offline
Find More Posts by bigstatik
Trader Rating: 21
T-28 abuser
bigstatik's Avatar
Quote:
Originally Posted by DJO View Post
Says it right in the description...
Fail.
Old Jan 23, 2013, 08:04 PM
DJO is offline
DJO
Find More Posts by DJO
Trader Rating: 106
DJO
"Yo, that's a thermal"
DJO's Avatar
Looks like I'll have sufficient funding for my next project without selling this...

Thread closed, thanks for looking!



Dan

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 3DHS 46" Vyper Rx Ready (LPU only So. Cal) thomer Aircraft - Electric - Airplanes (FS/W) 5 Jan 29, 2013 07:28 PM
Sold 41" Buck Huck (3DHS Edge) harddrive8 Aircraft - Electric - Airplanes (FS/W) 4 Jan 25, 2013 12:12 PM
Discussion 3DHS 42" Slick or 41" Edge / Differences Witterings 3D Flying 3 Jan 17, 2013 03:37 PM
For Sale 3DHS 47" Edge Rx ready LPU only So. Cal thomer Aircraft - Electric - Airplanes (FS/W) 0 Aug 27, 2012 02:27 PM
For Sale 3DHS 41" Edge 540 RX ready $220 LPU preferred gonzoman5 Aircraft - Electric - Airplanes (FS/W) 2 Oct 10, 2011 05:33 PM