Simple AlexMos 8bit brushless gimbal controller from Viacopter - Page 17 - RC Groups
Thread Tools
Jan 27, 2013, 11:23 AM
Registered User
wallaguest1's Avatar
what about this model?



looks much more cool and sexy then the black one

Sign up now
to remove ads between posts
Jan 27, 2013, 11:27 AM
Begin with end in mind...
power's Avatar
This model was talked about earlier in the thread....


Mike
Jan 27, 2013, 11:57 AM
Registered User
Quote:
Originally Posted by wallaguest1


Jussi/kinderkram are you planning on releasing a gimbal like shown in the picture, or are you planning on making a complete gimbal - ready to fit to MR frame?
Jan 27, 2013, 12:00 PM
Droner
SebastianJ's Avatar
We will release ready to fit versions in three different sizes.
Jan 27, 2013, 12:02 PM
recep
recep's Avatar
Will you sell the controller alone?
Jan 27, 2013, 12:02 PM
Friend is a 4 letter word...
JussiH's Avatar
Quote:
Originally Posted by recep
Will you sell the controller alone?
Yes!
Jan 27, 2013, 12:30 PM
Registered User
FixedWing172's Avatar
Will you come to my house and make me popcorn?
Jan 27, 2013, 12:38 PM
Friend is a 4 letter word...
JussiH's Avatar
Quote:
Originally Posted by FixedWing172
Will you come to my house and make me popcorn?
Depends on how well you pay....
Jan 27, 2013, 12:46 PM
Make UAVs, not drones! ;-)
jazzboy's Avatar
Will this version of the controller be able to handle the draw of a motor like this:

http://www.rctimer.com/index.php?gOo...5&productname=

And this is my camera:

http://store.sony.ca/webapp/wcs/stor...52921666429167

Cheers,
Andy
Jan 27, 2013, 01:52 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by DrEvil
Looks like an orderery dLRK winding, most likely terminated in star config.

Anybody tested an alredy winded motor's kv ?
The attached pic is only 1 example to show you that you'll be getting a nice graphic after calculating...
Jan 27, 2013, 01:55 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by robin4
Jussi/kinderkram are you planning on releasing a gimbal like shown in the picture, or are you planning on making a complete gimbal - ready to fit to MR frame?
This is the luxury version being offered by E-Copter who teamed up with Viacopter and Flyduino.
Read post #2
Jan 27, 2013, 02:55 PM
E-Copter
Bricobrac's Avatar
Hi,

the rendering that people use is a basic rendering full of ineptias that we made. It gives an idea, but this is not final design (we try to avoid beeing copied our original designs by asia before we release it.... You will notice lot of mechanical ineptias in this rendering, but it has in some ways the main lines shown.

We will provide maybe 2 different supports, one for front mount and one for under frame mount ?

Viactoper/Flyduino and myself have each our own little mechanics designs, and i don't think there is any kind of competitions as we are simply on 2 different sectors, it's easier to work this way, and much more funny

Sure thing, this 2013 year will be loaded in new stuffs

Best regards,
Fabien
Jan 27, 2013, 03:12 PM
Registered User
Hi Jazzboy, nop not unless you rewinde it, follow AlexMos rewinding video.

перемотка двигателей, AlexMos Simple BLGC (5 min 38 sec)
Jan 27, 2013, 03:14 PM
Registered User
Patscherpofel's Avatar
a bit detailed question ...would it be possible to turn the stabilzation off via a dedicated switch on the tx? just keeping the manual control of camera tilt

I think a lot of people will use this gopro setup for fpv
but fpv with a perfectly stabilized camera can be very irritating (when its windy for example)
would be nice to have this option for finding the position for a shot and then once you feel good turn cam stabilzation on
I know this is this is something that makes fpv filming really hard with an ecilop for example
Jan 27, 2013, 04:11 PM
Registered User
ralfrcgroups's Avatar
Quote:
Originally Posted by Patscherpofel
a bit detailed question ...would it be possible to turn the stabilzation off via a dedicated switch on the tx? just keeping the manual control of camera tilt
Good thing to keep in mind - I would also like to see that option!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-HowTo Super Simple Gimbal - SSG - KK2.1 & OpenPilot support crezzee Aerial Photography 1675 Sep 05, 2017 03:57 AM
Yippee! Simple Brushless Gimbal Controller--FPV MODEL fpvmodels Multirotor Drone Talk 3396 Dec 26, 2014 07:23 PM
Discussion A very simple camera-gimbal for Gaui 330xs babanan Multirotor Drone Talk 2 Oct 09, 2013 09:46 AM