DDVP 450 tail - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Ken59, who may elect to delete unwanted replies.
Jan 21, 2013, 09:09 AM

DDVP 450 tail

I have built a DDVP and will be testing shortly. It is a very good build and I will be posting vids and pics soon. With a 9ch TX/RX, I can mix it into a pot and run at a constant rate. Motor is a very strong 1700kv which I think, after running a few times, may be way to much for a 450, even at only half throttle. I have a 1500kv to run, also, with testing down to 1200kv to run at WOT. I built the unit with a metal HK tail holder and with a plastic also. I do prefer the metal and looking for the same tail holder at quantity discount. If you read this, let me know via this discussion, a PM, or an email. Thanks!
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DDVP 450 tail Ken59 Electric Heli Talk 8 Jul 15, 2013 12:15 PM
Discussion 450 Huey DDVP Flight time Scale Helicopters 45 Nov 04, 2011 05:58 AM
Discussion DDVP tail system on a Trex 250 w/crashes McKrackin Micro Helis 38 Mar 13, 2011 05:55 AM
Discussion DDVP tail on Trex 250...SR owners take note.lol... McKrackin Micro Helis 21 May 30, 2010 04:28 PM