Avanti S - Sebart - Wing Fixing - RC Groups
Thread Tools
Jan 21, 2013, 03:08 AM
Registered User

Avanti S - Sebart - Wing Fixing

For some time now I have been thinking of getting a Sebart Avanti S, recently I came accross a copy of the photo instruction manual and I was interested to see the method of retaining the wings on the model.

It seems that you have to drill through the wing from the underside, ( not sure if the actual postion of the hole is located or identified on the wing ) then the carbon fibre wing tube is installed and then that is drilled slightly smaller using the first hole as a pilot and a 3mm x 16mm screw is inserted to hold the wing in place. It does not identify anything other than the balsa skin and covering as acting as the medium of holding the screw ( and wing )

I have always employed how to say more positive methods of retaining wings and I am looking for any comments on this, it could be that the photo instructions are not showing everything.

Thank you
Sign up now
to remove ads between posts
Jan 23, 2013, 03:21 PM
vettster's Avatar
If you can find someone that has a set.. Mulitplex wing locks are the answer. There may be other similar ways to do it such as automotive locks used to hold body panels on(just thinking out loud)

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Wing depression fix RCDad Sailplane Talk 14 Jan 16, 2013 02:05 PM
Yippee! Fix for wing rock, Sebart Katana S 30E Stark 3D Flying 9 Aug 23, 2012 03:58 PM
Sold Avanti Delta wing Steve H. Aircraft - Electric - Airplanes (FS/W) 2 May 02, 2007 01:11 AM
For Sale Avanti Delta wing Steve H. Aircraft - Electric - Airplanes (FS/W) 1 Apr 09, 2007 08:39 PM
Sold Avanti Speed wing Eyefly Aircraft - Electric - Airplanes (FS/W) 3 Jun 22, 2006 02:21 PM