New Products Flash Sale
Thread Tools
Old Jan 18, 2013, 12:03 PM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
Discussion

Blade 300x new to the fleet


hey everybody what's up just bought my blade300x I've been flying my 130x
For awhile now and been wanting the 300x so bought it, I'm using my dx6i and I was wounding if any of you out their in heli land might have some info maybe you have one or
Had one, any useful info is very much appreciated good...and hopefully not too bad lol thanks...lozki
RCG Plus Member
Latest blog entry: My Helis
Sign up now
to remove ads between posts
Old Jan 18, 2013, 03:10 PM
Pompedo is offline
Find More Posts by Pompedo
Registered User
It is a great heli ... A huge confidence builder, I also bought a 450x
Just make sure you give the motor a drop of motor or bearing oil every 5 to 10 flights or else the motor might fail. I also blow some compressed air on the motor to blow out any dirt ... Hope that helps , happy flying !
Old Jan 18, 2013, 04:17 PM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
Pompedo thanks for the heads up ill have to swoop up some oil just Reg oil for helis?
RCG Plus Member
Latest blog entry: My Helis
Old Jan 18, 2013, 06:39 PM
ewoodcox is offline
Find More Posts by ewoodcox
Axes & Blades-Cutlery & Helis
use tri-flow, available at Walmart and off the inter-webb thing

I just picked up a 300x without the 7200bx, for now I am going to use another controller with satellite RX but I hope to pick up a 7200 bx in the next few months. I can't believe how cheap those are used This should be a interesting science experiment using a ZYX-S FBL on the 300X.
Old Jan 18, 2013, 08:05 PM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
nice good looking "ewoodcox" tri-flow huh have a walmart on the south side, so your useing a ZYX-S fbl have you used it before?? i see alot of 300x on here most of them have been raped lol beastX is gone then sell then cheap how long have you had your 300x.
RCG Plus Member
Latest blog entry: My Helis
Old Jan 18, 2013, 08:20 PM
ewoodcox is offline
Find More Posts by ewoodcox
Axes & Blades-Cutlery & Helis
it shipped yesterday I have the ZYX-S, actually 2, one for a CopterX500 and the other to convert my EXI250....guess the 250 is going to keep the FB for now

This is the guy I picked up, right here on RCG

https://www.rcgroups.com/forums/show....php?t=1811020

I picked up the cyclic servos with it so all I have to do is mount the controller, the satellite RX, set it up and start test flying Got everything in the house cept the heli
Old Jan 18, 2013, 10:39 PM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
Nice have you done any new servos on your 300x or is it just stock
RCG Plus Member
Latest blog entry: My Helis
Old Jan 18, 2013, 10:54 PM
ewoodcox is offline
Find More Posts by ewoodcox
Axes & Blades-Cutlery & Helis
stock tail, 3 Hitec HS5065MG on the cyclic
Old Jan 19, 2013, 10:11 AM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
ok ive heard of people taking that stock servos out and up grading them im going to check that out
RCG Plus Member
Latest blog entry: My Helis
Old Jan 19, 2013, 02:09 PM
ewoodcox is offline
Find More Posts by ewoodcox
Axes & Blades-Cutlery & Helis
I think I would fly it stock for awhile, unless you are a master 3D pilot you may not notice the difference. Most Blade stuff I have ever had flies awsome out of the box. They really make a good product.... I'm anxious to hear your thoughts when you get to fly yours
Old Jan 19, 2013, 03:44 PM
Lozki is offline
Find More Posts by Lozki
chopper chopper chopper!!!
Lozki's Avatar
so do you use oil in your heli ewoodcox you said some thing about the motor is that all i need to oil
RCG Plus Member
Latest blog entry: My Helis


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Brand new, never flown Blade 300X indoorheli Aircraft - Electric - Helis (FS/W) 7 Jan 21, 2014 12:35 PM
Question Next heli after a Blade Nano CP X? Blade 300X? 450 3D? 450X? Arycon Mini Helis 15 Jun 28, 2013 11:41 PM
Sold Blade 300X With Extras! $110.00 Shipped!! Hobby head Aircraft - Electric - Helis (FS/W) 3 Jan 17, 2013 10:53 AM
Sold Blade 300X Carbon Edge Blades $20.00 Shipped! Hobby head Aircraft - Electric - Helis (FS/W) 3 Jan 16, 2013 11:11 PM
Sold blade 300X, brand new. 290.00 shipped the_master Aircraft - Electric - Helis (FS/W) 3 Jan 16, 2013 06:40 PM