JetPol GTM 85 polish turbine - RC Groups
Thread Tools
This thread is privately moderated by ecokopter.pl, who may elect to delete unwanted replies.
Jan 15, 2013, 02:37 PM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
Sold

JetPol GTM 85 polish turbine


The engine is in very good condition. He worked only 5 hours. Recommended review after 25 hours. I always worked on the JET A1 aviation fuel.

The set is all you need:
1x turbine
1x temperature sensor
1x fuel pump AERIOS 7
2x magnetventil
1x Moduł sterujący ECU
1x Module programming and operatingi GSU with LCD display
1x fuel filter
1x turbine guard
1x alu turbine mount
Other cables and accessories

Specifications:
static thrust: 85N
rotor speed at max power.: 120 000 rpm/min
minimum RPM: 33 000 rpm/min
fuel consumption: 310 g/min
fuel: JET A1 + 3% MOBILE Jet Oil II
electric starter
control computer
dimensions: length: 340mm, diameter: 110mm
weight: 1470g

images gallery: https://picasaweb.google.com/Dawid.e...COyy-9ba57jYFg

price: 1850$ + international shipping (to be agreed)
Please do not write in the subject!
PM only!
Last edited by ecokopter.pl; Jan 26, 2013 at 07:59 AM.
Sign up now
to remove ads between posts
Jan 15, 2013, 09:40 PM
Trader Rating: 8
Registered User
mshay's Avatar
_____________________*
Last edited by mshay; Jan 16, 2013 at 12:18 AM.
Jan 15, 2013, 11:50 PM
Trader Rating: 94
I fly, therefore, I crash!!!
SteveT.'s Avatar
........
Latest blog entry: My hangar...
Jan 17, 2013, 03:52 AM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
1800$
Jan 19, 2013, 06:35 AM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
1750$
Jan 20, 2013, 09:17 AM
Trader Rating: 31
Registered User
Dr Honda's Avatar
you can delete this if you like... But it's going to be hard to sell a used engine for the same price as a NEW KingTech K-80. They are $1750, and you can find them on sale for under $1700 once in a while.

Also... since there isn't any support for it in the USA... that will make it hard to sell also.

But... good luck.
Jan 22, 2013, 11:05 AM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
KingTech = Taiwan
JetPol = Poland
Each decides what prefer

but even lowers the price to 1650$
Jan 22, 2013, 10:09 PM
Trader Rating: 8
Registered User
mshay's Avatar
Lower that thing to 200 America/U.S./Bucks/Dollars/Dough/Cash and I will buy it.
Jan 23, 2013, 06:51 AM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
Jan 24, 2013, 09:54 AM
Trader Rating: 8
Closed Account

Realisticaly


Quote:
Originally Posted by ecokopter.pl
KingTech = Taiwan
JetPol = Poland
Each decides what prefer

but even lowers the price to 1650$
Realistically $500 to $600 is about all you will get. The biggest problem, NO SUPPORT. if the bearings go out, or internal parts are damaged, ( it happens all the time), there's no place to get repaired. At that point it's expensive junk. Your probably better off to sell it in Poland. BTW, Taiwan isn't China, the quality is a lot higher.

My 2 cents worth
Jan 24, 2013, 03:41 PM
Trader Rating: 10
Registered User
Alkaline's Avatar
Quote:
Originally Posted by LJE4357
Realistically $500 to $600 is about all you will get. The biggest problem, NO SUPPORT. if the bearings go out, or internal parts are damaged, ( it happens all the time), there's no place to get repaired. At that point it's expensive junk. Your probably better off to sell it in Poland. BTW, Taiwan isn't China, the quality is a lot higher.

My 2 cents worth
He's right
Jan 24, 2013, 04:20 PM
Trader Rating: 566
Aerial Appeal
txshan130's Avatar
very true
Jan 24, 2013, 07:51 PM
Trader Rating: 8
Registered User
mshay's Avatar
Oh come on....I was hoping to get it for 200 bucks. Now you told him he could get 500-600, now that puts a dampner on my plans.
Jan 24, 2013, 07:54 PM
Trader Rating: 8
Registered User
mshay's Avatar
Crap Dang shoot , there goes all my hopes and dreams for a jetpol turbine engine from pollock.
Jan 26, 2013, 08:03 AM
Trader Rating: 2
Registered User
ecokopter.pl's Avatar
sold
thx for interesting
bye bye

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Vario Turbine Lama Heli almost half price new JAKADOFSKY TURBINE ENGINE PJW--LE-SW Go4it Aircraft - Fuel - Helis (FS/W) 0 Oct 26, 2012 07:16 AM
Sold 3 3/4" 2blade polished aluminum spinner w/nut scones007 Aircraft - Fuel - Engines and Accessories (FS/W) 2 Mar 21, 2012 10:54 PM
Sold GTM 1/4 Fokker D6 kit w/all options including lozenge bhouin Aircraft - Fuel - Airplanes (FS/W) 2 Mar 19, 2012 07:11 PM
Help! Can you get with a 90mm turbine not to exceed 2800 watts 85 to 90 amps of consumption Ruyman Electric Ducted Fan Jet Talk 14 Jan 16, 2011 02:59 AM
Question Power system for GTM Fokker D-6 johnmartin Power Systems 0 Jan 12, 2010 02:23 PM